MEasuring BAndwidth Usage of a Specific Port

Modified on 2025-06-10 11:31:02 +0200

Hi,

I want to measure the bandwidth usage of a single port. This is a specific port that I am using to broadcast a radio stream in rtsp protocol for Android devices. In order to measure the total listener numbers I wanted to measure the bandwidth that is consumed by that specific port.

Is it possible to achieve this? If so, could you please help me sort this out?

Thank you very much in advance.

Best Regards, Arda

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Monitoring the bandwidth usage of a single port is pretty easy if your switch supports SNMP.

Simply add your switch to PRTG as a new device, then add "SNMP Traffic" sensors (one for each port).

Mar, 2012 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

MEasuring BAndwidth Usage of a Specific Port

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.