Runing 'RTG Network Monitor 9.2.0.2141' I am unable to connect a remote probe. have tried this on two different servers acting as remote probes, and both produce the same errors (and remote probe does not appear in 'devices'. On the remote probe log windows I get....

03/02/2012 17:38:47 
03/02/2012 17:38:47 PRTG Probe V9.2.0.2141
03/02/2012 17:38:47 PRTG Probe starting on "EMBANKMENT"
03/02/2012 17:38:48 OS: Windows Server 2003 (5.2.2 Build 3790 Service Pack 2), 1 CPUs, Intel Pentium, on VMware
03/02/2012 17:38:48 Data Path: C:\Documents and Settings\All Users\Application Data\Paessler\PRTG Network Monitor\
03/02/2012 17:38:48 System Path: D:\Program Files\PRTG Network Monitor\
03/02/2012 17:38:48 Local IP: 192.168.202.13
03/02/2012 17:38:48 Core Server IP: 192.168.192.3
03/02/2012 17:38:48 Core Server Port: 23560
03/02/2012 17:38:48 SSL Enabled
03/02/2012 17:38:48 Probe GID: {62B71B7D-8E84-41D2-A7A7-0B6A46592F95}
03/02/2012 17:38:48 Could not initialize Traffic Control API: Error reading interface list, make sure QoS Packet Scheduler is active for this interface.

Article Comments

Hello,

this message does not prevent the Probe Service from starting, this is only a message that due to the underlying OS (XP or 2003) a certain feature for the QoS-Sensor will not be available (which is to set the 'ToS'-value for this sensor's packets). The Probe should show the cause later on in the Log why it cannot/doesn't connect.

best regards.


Feb, 2012 - Permalink