Hello, I have some routers Cisco with subinterface frame-relay ,which, is appear the error : no such name ( snmp error #2 ) in the PRTG. this error occur when I add the sensor "SNMP Traffic" for any subinterface frame-replay.

I've already set a device to 32-bit as suggestion from this forum but doesn't work.

please any tip is welcome.

Article Comments

please take a look at

https://www.paessler.com/knowledgebase/en/topic/803-how-can-i-see-all-interfaces-when-adding-an-snmp-sensor-for-my-cisco-device

and

https://www.paessler.com/knowledgebase/en/topic/2973-monitoring-physical-interface-on-cisco-switch


Aug, 2011 - Permalink

doesn't work!

remembering doesn't work only for subinterfaces frame-relay from Cisco devices

thanks


Aug, 2011 - Permalink

hello people, please help me with my case.

why isn't work get from PRTG to frame-relay subinterface ? follow the subinterface ID number (12 )

PAC0101#show snmp mib ifmib ifindex serial 0/2/0.100

Interface = Serial0/2/0.100, Ifindex = 12

all seem be correct but doesn't work! the PRTG shows no such Name (SNMP error #2 )

thanks


Aug, 2011 - Permalink