the manual said SNMP v2c trap can be supported, but actually seems not work!!

Article Comments

Hello,

SNMP v2 traps are indeed not supported by PRTG. Where in the manual do you see contrary statements?

best regards.


May, 2011 - Permalink

Hi,

in https://www.paessler.com/manuals/prtg7/snmp_sensors.htm.

SNMP Sensors .... The following sensors use the Simple Network Management Protocol (supports SNMP V1, V2c and V3): ..... SNMP Trap Receiver: Opens a UDP port on a probe and waits for SNMP Traps, then processes the information.


May, 2011 - Permalink

This is the manual for PRTG 7 (now we have PRTG 8), and it's indeed not correct there, but that is fixed in the manual for PRTG 8.


May, 2011 - Permalink