What sensor to use on cisco catalyst 3750

Modified on 2025-06-10 11:58:40 +0200

We are running a Catalyst 3750 for our network in star formation. We also have voip running and have a problem with brake-up on voice calls. After resetting the switch the problem the problem goes away for a while. What sensor can i use to monitor the switch to make sure it can handle the trafic. I at present make use of SNMP Trafic. This does not tel me if the switch is running at ful capasity?

Regards.

Johann van Coller

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Ron an auto discovery on the switch. That should add a CPU and RAM usagesensor to the switch.

Have you thought about adding a QoS sensor

https://www.paessler.com/manuals/prtg8/qos_quality_of_service_sensor.htm

It might help you to find the bottleneck

Mar, 2011 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

What sensor to use on cisco catalyst 3750

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.