Solutions

Sensor for Telnet Meesages

Modified on 2025-06-10 12:06:53 +0200

Hi, I want to connect PRTG to a Telephony-System via Telnet at Port 2001. The PBX sends periodically it's status at this port and I want PRTG to read that status and create an alarm if the status differs from the normal.

What must I do? :)

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Hallo,

this is not possible out of the box with PRTG.

Nov, 2010 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

Sensor for Telnet Meesages

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.