Hello,
We are monitoring hundreds of switches with snmp rmon. On every port there is an channel paketloss.
How can I create a list or a report which shows me every port with paketloss in the last week?
Report to show Paket loss of switch ports
Modified on 2025-06-10 12:34:37 +0200
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Hello Stefanwe,
Thank you very much for your contact.
Have you already checked the "Report" section within PRTG. You can enter it from the navigation bar above. Simply create a new report, set your settings such as Template, Paper Size etc. within the "Settings" tab and select the relevant sensors from the "Select Sensors Manually" tab. You can disable and enable the corresponding sensor channels here.
Afterwards, run the report from the "Run Now" tab and select the wished time period for it.
Please let me know if you have further questions.
Best regards,
Sebastian
Sep, 2018 - Permalink