Hi,

I will need a hint on how to monitor system status for my workstations in the network using SNMP. What I need is mainly sensors for Fan, Power, Hdd. Unfortunately I cannot find any relevant MIBs/OIDs.

Article Comments

Dear dannistorescu

For some servers, like some HP servers, you can use our dedicated SNMP sensors. Otherwise, you need to get the MIB files to convert the MIB into the OIDLIB format which in turn can be used by the SNMP Library sensor. Please contact the manufacturer or service partner for the according MIB files for your servers.


Jul, 2016 - Permalink

This article applies to PRTG Network Monitor 18 or later

Monitoring Fujitsu PRIMERGY Servers with PRTG

As of PRTG Network Monitor version 18.2.40, you can now monitor your Fujitsu PRIMERGY servers via the integrated Remote Management Controller (iRMC) and SNMP out of the box! PRTG version 18.2.40 includes a new sensor type that shows you important information about your Fujitsu PRIMERGY servers.

The new SNMP Fujitsu System Health Sensor can show you the overall status, CPU status, memory module status, power consumption status, temperatures of various components, and more.

The sensor might also work on other Fujitsu devices that have an iRMC available like PRIMEQUEST servers, some storage systems of the ETERNUS product line, and CELSIUS workstations in racks.

Note: This sensor type is in beta status and may be subject to change at any time.


May, 2018 - Permalink