Import of TP-Link MIBs
Modified on 2025-06-10 13:06:21 +0200
Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.
Important: We no longer maintain this article. The information might be out of date.
Article Comments
Hello Ingo,
I believe the second link you've provided is for the firmware image.
The links for the MIB files are:
For TL-SG3210_V2
For TL-SG3210 V2 140515 and Subsequent Versions
Since the MIB is composed from many individual files, please proceed with the following:
- Download the correct file that corresponds to your switch.
- Un-zip the downloaded file.
- Search for *.mib and copy all mib extension files to a same folder.
- Execute the Paessler's MIB Importer.
- Select (File > Import MIB File)
- Select all MIB's within the folder and click 'Open'.
That should allow you to review the OID's that where obtained by the MIB importer. If you're missing anything from the original MIB files, please reply so that we can check it.
Jun, 2015 - Permalink
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Hello Ingo,
I believe the second link you've provided is for the firmware image. The links for the MIB files are:
For TL-SG3210_V2
For TL-SG3210 V2 140515 and Subsequent Versions
Since the MIB is composed from many individual files, please proceed with the following:
That should allow you to review the OID's that where obtained by the MIB importer. If you're missing anything from the original MIB files, please reply so that we can check it.
Jun, 2015 - Permalink