Monitoring Cisco AP's
Modified on 2025-06-10 13:15:08 +0200
Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.
Important: We no longer maintain this article. The information might be out of date.
Hi Paessler,
We have a number of Cisco 891's on our network that we monitor. Monitoring the router itself is no problem but the AP is embedded so I was wondering if it's possible for PRTG to pull stats from it and if so, what sort of sensors is PRTG able to produce for wireless devices?
Many thanks
Rob Hamilton
Article Comments
Dear Rob
Please add the APs as devices and add SNMP Traffic sensors. This should normally provide you with traffic statistics.
Mar, 2015 - Permalink
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Dear Rob
Please add the APs as devices and add SNMP Traffic sensors. This should normally provide you with traffic statistics.
Mar, 2015 - Permalink