Hi, The ID that are under i.e. Snmp Sensor Physical Disk "Disk Status" is 6. But what does the number 6 means? Where could i find the meaning of all the ID´s for different sensors?

Article Comments

Hello,

thank you very much for your KB-Post. May I ask, could you please upload a screenshot showing what exactly you are referring to? Thank you.

best regards.


Mar, 2014 - Permalink

Hi Torsten, Here is a screenshot of what ill mean. Its the ID and what the different meaning of the numbers.

Image description

Best Regards


Mar, 2014 - Permalink

The 'ID' is the Channel-ID here. So to number the different channels of this sensors.


Mar, 2014 - Permalink

So are those numbers static or does the number change if something goes wrong?


Mar, 2014 - Permalink

A channel-ID will not change (the value / result of course may change, depending on what the sensor monitors). The Channel-ID is necessary to identify a channel of a sensor.


Mar, 2014 - Permalink

So if i would like to set an alarm with a limit, what should i use? For example the the disk status?


Mar, 2014 - Permalink

Then you would use the "Last Value"-column, and maybe set Limits on the Channel. But it could also be that the sensor uses a lookup to go into error state.


Mar, 2014 - Permalink