Configuring monitoring of HP LeftHand storage in PRTG

Modified on 2025-06-10 13:55:06 +0200

We have a HP LeftHand Storage which is directly attached to a server. This storage is not accessible from outside world and accessible only through that server We are monitoring the Server. How do i monitor the storage device

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Depending on how you would want to monitor, the easiest way to do this would be to set up a |remote probe on the server that the device is connected to. That way the server could make the requests to the device for SNMP or otherwise directly.

If this isn't an option, you would have to see if the device can somehow send statistics to the host server that could then be queried.

Feb, 2014 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

Configuring monitoring of HP LeftHand storage in PRTG

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.