I Monitors router via snmp (bandwidthsensor, snmptrafficsensor) How to monitor the Traffic In (volume) per month, and send Alarm if it is above the threshold?

Article Comments

Hi,
you might use the Threshold Trigger on this sensor for this purpose. It will alarm you when a defined threshold over a time is reached.
Best regards


Jun, 2013 - Permalink

How can I see the current value of Traffic In (volume) this month?


Jun, 2013 - Permalink

You can either use the 30 days graph of your sensor, which will show you a total sum of the month or you might use the Historical Data tab of the sensor to define a own range which should be shown.


Jun, 2013 - Permalink

>>You can either use the 30 days graph of your sensor, which will show you a total sum of the month

30 days graph show sum of the current month and part of the previous month. I need the sum of one month (for example 01.06.2013-30.06.2013)

>>or you might use the Historical Data tab of the sensor to define a own range which should be shown.

Historical Data show only Total (Traffic Total), no Traf In/Traf Out.


Jun, 2013 - Permalink

If you need more detailed figures and data you will have to use the normal reporting function of PRTG.


Jun, 2013 - Permalink

I need a compact form of the report with many traffic sensors. It's Report with Template "List of sensors (no graph)" or "List of sensors (with 1h graph)". These Reports show only Total (Traffic Total), no Traf In/Traf Out!

Please add Traf In/Traf Out (volume) to these Reports.


Jun, 2013 - Permalink

I'm afraid there are no changes planned for the reporting at the moment. However, you might try editing the report templates to get a custom report template.


Jun, 2013 - Permalink