Solutions

Sypervision of physical Serveur

Modified on 2025-06-10 14:18:34 +0200

I would like to supervise the RAID Serveur (Dell, Fujitsu and other). I try to active SNMP in the iRMC and iDRAC card but, no disc is detected. This serveur are server virtualization. It's possible to use the sensor "Hardware Perfomance" at the ESXi for supervise the RAID status. How to monitor disk RAID ?

Cordially

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

The RAID status for those cards should be able to be monitored by Custom OIDs that would come from the manufacturers website. There you can likely download the MIBs for these cards and create SNMP Library sensors for them after importing the MIBs into PRTG using our tool.

The ESX sensors will not monitor the RAID status.

Jun, 2013 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

Sypervision of physical Serveur

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.