Solutions

System Health Voltages (small bug)

Modified on 2025-06-10 14:26:18 +0200

Hi, The default limit values for channel 9 - Voltage 4 (-11.95V) are in the wrong order.

The max is set per default at -14381 and the min at -9524 As these number are negative, the min should be -14381 and the max -9524

Manually correcting the values works for me.

Tested with a Cisco 7206 VXR and a Cisco ASR 1001F

Kind regards,

Marc

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Thank you very much for that feedback.

At the moment, we're using ciscoEnvMonVoltageThresholdLow for the minimum and ciscoEnvMonVoltageThresholdHigh for the maximum. Seems like we've got to interpret those values as absolute values.

We'll fix this bug as soon as possible.

In the meantime, please swap the values in the channel settings.

Mar, 2013 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

System Health Voltages (small bug)

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.