Problem while sending traps to trap reciever using SNMP mib file

I am trying to upload .mib file into a trap reciever to route my SNMP traps. It says 0 files added, when i treid to upload. What might be the probelm. I did all neccessary configratons in trap reciever. Mib files i used are like below....

Old mib file.... ------------ With this file i am able to load this mib file and i am able to send traps also to trap reciever. The contents of the fiel are as follows... -- *************** -- Filename: dash.mib -- Description: SNMPv2/SMIv2 MIB for Tertio -- -- %version: 1 % -- %date_modified: Wed Dec 03 12:24:46 2008 % -- ***************

DASH-MIB DEFINITIONS ::= BEGIN

IMPORTS enterprises, IpAddress, Counter, Gauge, TimeTicks, Integer32 FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215;

-- ============================================================================= -- iso.org.dod.internet.private.enterprises.evolving (1.3.6.1.4.1.653) -- =============================================================================

DisplayString ::= OCTET STRING

evolving OBJECT IDENTIFIER ::= { enterprises 653 }

evolvingProduct OBJECT IDENTIFIER ::= { evolving 1000 }

-- ============================================================================= -- MODULE IDENTITY -- =============================================================================

dash MODULE-IDENTITY LAST-UPDATED "200904161141Z" ORGANIZATION "Evolving Systems Ltd." CONTACT-INFO " PEG

Evolving Systems Ltd One Angel Square Torrens Street London EC1V 1PL UK

Tel: +44 (0) 20 7843 4080 Fax: +44 (0) 20 7843 4001

E-mail: peg_mib_admin@evolving.com" DESCRIPTION "The MIB module for Dashboard" ::= { evolvingProduct 3 }

-- ============================================================================= -- Event Grouping (must be 0 for for SNMPv1 SNMPv2 interworking with proxies) -- =============================================================================

dashTraps OBJECT-IDENTITY STATUS current DESCRIPTION "Root of Notifications. " ::= { dash 0 }

-- ============================================================================= -- Variable Groupings -- =============================================================================

dashInfo OBJECT-IDENTITY STATUS current DESCRIPTION "Root of Link Info variables. " ::= { dash 1 }

-- ============================================================================= -- Internal Variables - Error Reporting -- =============================================================================

dashHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS accessible-for-notify STATUS mandatory DESCRIPTION "Host raising the alarm. " ::= { dashInfo 1 }

dashComponent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS mandatory DESCRIPTION "Process raising the alarm. " ::= { dashInfo 2 }

dashId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "Id for process raising the alarm. " ::= { dashInfo 3 }

dashProcess OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS mandatory DESCRIPTION "Process raising the alarm. " ::= { dashInfo 4 }

dashSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "Source originaing the error " ::= { dashInfo 5 }

dashLine OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "Line where the error is raised " ::= { dashInfo 6 }

dashSeverity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS mandatory DESCRIPTION "The severity of the error " ::= { dashInfo 7 }

dashPackage OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "The package containing this error " ::= { dashInfo 8 }

dashErrno OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "The error number " ::= { dashInfo 9 }

dashErrmsg OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "The error message " ::= { dashInfo 10 }

dashText OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS accessible-for-notify STATUS optional DESCRIPTION "Additional error string " ::= { dashInfo 11 }

dashTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS mandatory DESCRIPTION "Timestamp when trap generated " ::= { dashInfo 12 }

-- ============================================================================= -- Notification Events Group -- =============================================================================

dashEvent TRAP-TYPE ENTERPRISE dash VARIABLES { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } DESCRIPTION "An Dashboard Alarm has occured." ::= 0

dashFatalEvent TRAP-TYPE ENTERPRISE dash VARIABLES { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } DESCRIPTION "A Fatal Error has occured." ::= 1

dashErrorEvent TRAP-TYPE ENTERPRISE dash VARIABLES { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } DESCRIPTION "An Error has occured." ::= 2

dashWarningEvent TRAP-TYPE ENTERPRISE dash VARIABLES { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } DESCRIPTION "A Warning Message has been received." ::= 3

dashInfoEvent TRAP-TYPE ENTERPRISE dash VARIABLES { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } DESCRIPTION "An Information Message has been received." ::= 4

END

New mib file... ----------------

This new mib file i am not able to load this file into trap reciever and i am not able to send traps also to trap reciever... The file is like below...

-- *************** -- Filename: dash.mib -- Description: SNMPv2/SMIv2 MIB for Tertio -- -- %version: 2 % -- %date_modified: Wed Dec 03 12:24:46 2008 % -- ***************

DASH-MIB DEFINITIONS ::= BEGIN

IMPORTS enterprises, MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString, DateAndTime FROM SNMPv2-TC;

-- ============================================================================= -- MODULE IDENTITY -- =============================================================================

dash MODULE-IDENTITY LAST-UPDATED "200904161141Z" ORGANIZATION "Evolving Systems Ltd." CONTACT-INFO " PEG

Evolving Systems Ltd One Angel Square Torrens Street London EC1V 1PL UK

Tel: +44 (0) 20 7843 4080 Fax: +44 (0) 20 7843 4001

E-mail: peg_mib_admin@evolving.com" DESCRIPTION "The MIB module for Dashboard" ::= { evolvingProduct 3 }

evolving OBJECT IDENTIFIER ::= { enterprises 653 }

evolvingProduct OBJECT IDENTIFIER ::= { evolving 1000 }

dashTraps OBJECT-IDENTITY STATUS current DESCRIPTION "Root of Notifications. " ::= { dash 0 }

-- ============================================================================= -- Variable Groupings -- =============================================================================

dashMIBGroup OBJECT IDENTIFIER ::= { dash 1 }

dashInfo OBJECT-IDENTITY STATUS current DESCRIPTION "Root of Link Info variables. " ::= { dash 3 }

dashHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Host raising the alarm. " ::= { dashInfo 1 }

dashComponent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Process raising the alarm. " ::= { dashInfo 2 }

dashId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Id for process raising the alarm. " ::= { dashInfo 3 }

dashProcess OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Process raising the alarm. " ::= { dashInfo 4 }

dashSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Source originaing the error " ::= { dashInfo 5 }

dashLine OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Line where the error is raised " ::= { dashInfo 6 }

dashSeverity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The severity of the error " ::= { dashInfo 7 }

dashPackage OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The package containing this error " ::= { dashInfo 8 }

dashErrno OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The error number " ::= { dashInfo 9 }

dashErrmsg OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The error message " ::= { dashInfo 10 }

dashText OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Additional error string " ::= { dashInfo 11 }

dashTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Timestamp when trap generated " ::= { dashInfo 12 }

-- ============================================================================= -- Notification Events Group -- =============================================================================

dashEvent NOTIFICATION-TYPE OBJECTS { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } STATUS current DESCRIPTION "An Dashboard Alarm has occured." ::= { dashTraps 0 }

dashFatalEvent NOTIFICATION-TYPE OBJECTS { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } STATUS current DESCRIPTION "A Fatal Error has occured." ::= { dashTraps 1 }

dashErrorEvent NOTIFICATION-TYPE OBJECTS { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } STATUS current DESCRIPTION "An Error has occured." ::= { dashTraps 2 }

dashWarningEvent NOTIFICATION-TYPE OBJECTS { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } STATUS current DESCRIPTION "A Warning Message has been received." ::= { dashTraps 3 }

dashInfoEvent NOTIFICATION-TYPE OBJECTS { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } STATUS current DESCRIPTION "An Information Message has been received." ::= { dashTraps 4 }

dashNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { dashEvent, dashFatalEvent, dashErrorEvent, dashWarningEvent, dashInfoEvent } STATUS current DESCRIPTION "A collection of notifications to report DSA errors" ::= { dashMIBGroup 0 }

dashObjectGroup OBJECT-GROUP OBJECTS { dashHost, dashComponent, dashId, dashProcess, dashSource, dashLine, dashSeverity, dashPackage, dashErrno, dashErrmsg, dashText, dashTime } STATUS current DESCRIPTION "A collection of objects to report DSA errors" ::= { dashMIBGroup 1 }

END

Article Comments

Hi, what trap reciever are you refering to? The PRTG trap recever does not support the usage of MIB files.
Best regards

Jun, 2012 - Permalink

Problem while sending traps to trap reciever using SNMP mib file

Article Comments

Search

Attention

Related Articles