Hello,
I want to test wan speed in Draytek. I have configured 2 wan in Draytek and PRTG can check my 2 wan
information, I see log wan 1 but still do not understand its meaning as shown in the picture
How To Monitor WAN
Modified on 2025-06-10 14:55:47 +0200
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Hello there,
Thanks for your KB thread.
Please check the manual for SNMP Traffic Sensor. It explains what the channel means for Traffic In and Out.
https://www.paessler.com/manuals/prtg/snmp_traffic_sensor
The traffic that goes through the interface does not necessarily give you an overview of your WAN speed. The below article could be helpful in explaining how to perform tests for your WAN network.
https://www.hso.co.uk/leased-lines/leased-line-speeds/leased-line-speed-test-tips-how-to-check-the-speed-of-your-connection
With kind regards,
Chan Siau Hen
Technical Support Team, Paessler AG
Aug, 2021 - Permalink