I have a lot of different zigbee and Bluetooth mesh sensors connect via Wifi Hub.
i would like to add them to my prtg portal...
How I could add sensors connect to xiaomi gateway 3 to PRTG or some other wifi temperature sensor ?
How add gateway-hub to prtg ?
Is realy PRTG is not compatible with all this great sensors ?
Thankyou for help
Article Comments
Hello Svedr,
Reading through some articles found on the internet, the device is capable of MQTT itself, which is disabled, but can be activated through telnet. As we are not familiar with these devices, we cannot tell if this is supported or not, so this is at your own risk.
With enabled MQTT, you can use one of these PRTG sensors for the monitoring, or of course use a self-written sensor: MQTT Sensors
Kind regards,
Felix Saure, Tech Support Team
Jul, 2021 - Permalink
Thankyou...
I will research in this direction....
Jul, 2021 - Permalink
Hello Svedr,
Reading through some articles found on the internet, the device is capable of MQTT itself, which is disabled, but can be activated through telnet. As we are not familiar with these devices, we cannot tell if this is supported or not, so this is at your own risk.
With enabled MQTT, you can use one of these PRTG sensors for the monitoring, or of course use a self-written sensor: MQTT Sensors
Kind regards,
Felix Saure, Tech Support Team
Jul, 2021 - Permalink