When I select SNMP Rmon sensor for Dell switch, and scan it, that showing transmitted traffic that was traffic in, but not showing traffic out or total traffic.......and when SNMP traffic sensor showing traffic in, traffic out, traffic total....
Can I set traffic out, and traffic total in SNMP Rmon sensor as want CRC sensor also that only available in Rmon sensor....
Article Comments
Hi there,
I think you will have to use both the SNMP Traffic Sensor and the SNMP Rmon Sensor to get all the metrics you want. The problem is, that the "transmitted" channel does not provide the actual traffic, as explained here.
If you don't need only CRC errors, but all errors from an interface, you can also use the SNMP Traffic Sensor with the "additional channel" "Errors in and Errors out" activated.
Kind regards,
Matthias Kupfer - Team Tech Support
Jun, 2021 - Permalink
Hi there,
I think you will have to use both the SNMP Traffic Sensor and the SNMP Rmon Sensor to get all the metrics you want. The problem is, that the "transmitted" channel does not provide the actual traffic, as explained here.
If you don't need only CRC errors, but all errors from an interface, you can also use the SNMP Traffic Sensor with the "additional channel" "Errors in and Errors out" activated.
Kind regards,
Matthias Kupfer - Team Tech Support
Jun, 2021 - Permalink