Solutions

Adding a network device

Modified on 2025-06-10 15:13:46 +0200

Hi! I have my internal network (192.168.1.*), and your software found every item within that IP range. However, I run a small ISP with IP range 192.168.76.*, and I want to monitor AND log the router bandwidth usage. I currently monitor it through SNMP with "Solarwinds" free bandwidth monitor, but it doesn't log the data. This is the functionality I'm looking for from PRTG.

How can I add my router as a device in the 192.168.76.* range and set a sensor to monitor the bandwidth usage? Thanks!

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

In order to monitor a different network, you'll need to create a Remote Probe within this network.

Regarding bandwidth monitoring there are multiple different sensors available. You can find a comparison here.

Jan, 2021 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

Adding a network device

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.