I have Synology DS1515, DSM 6.2.3-25426 Update 2
What am I doing wrong? Im unable recive any OID answer.
Paessler SNMP Tester - 20.2.4 Computername: XX Interface: 172.20.20.198 25.09.2020 20:34:53 (10 ms) : Device: 172.20.20.1 25.09.2020 20:34:53 (13 ms) : SNMP v2c 25.09.2020 20:34:53 (16 ms) : Custom OID 1.3.6.1.4.1.6574.1.5.1 25.09.2020 20:34:53 (23 ms) : SNMP Datatype: SNMP_EXCEPTION_NOSUCHINSTANCE 25.09.2020 20:34:53 (26 ms) : ------- 25.09.2020 20:34:53 (29 ms) : Value: #N SNMP_EXCEPTION_NOSUCHINSTANCE223 25.09.2020 20:34:53 (32 ms) : Done
Article Comments
Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.
Hello,
Thank you for your message.
The OID 1.3.6.1.4.1.6574.1.5.1 is defined for the model name of a Synology NAS according to the documentation of Synology: https://global.download.synology.com/download/Document/Software/DeveloperGuide/Firmware/DSM/All/enu/Synology_DiskStation_MIB_Guide.pdf
However, to be able to get the value, you have to use 1.3.6.1.4.1.6574.1.5.1.0 (with .0 at the end) as displayed in the SNMP MIB Importer.
To get the model name in PRTG, you can use the SNMP Custom String sensor whose manual is right here: https://www.paessler.com/manuals/prtg/snmp_custom_string_sensor
Kind regards.
Sep, 2020 - Permalink