Hello everyone,

So, We've updated our PRTG to verison 20.1.57.1745+, everything was working until we've added new server using template and the one thing it is adding is ping, we have created a new template, same thing. We've tried pre-made ones and still was getting just ping. Checked the autodiscover logs and this is what they were saying.

INFO TId 628 CoreAutoDiscovery> Device ID: 4868 Name: <server> Host: <server> INFO TId 628 CoreAutoDiscovery> Device Templates; Device ID: 4868; Selected: 1 INFO TId 628 CoreAutoDiscovery> Template Loaded; Device ID: 4868; Name: <Template> INFO TId 628 CoreAutoDiscovery> Template Check; Device ID: 4868; Check ID: ping; FOUND INFO TId 628 CoreAutoDiscovery> Template Assigned; Device ID: 4868; Name: CCSO Template INFO TId 628 CoreAutoDiscovery> Sensor Created; Device ID: 4868; Create ID: {E6F31B41-AC40-40C8-A968-0DF41B65F684}; Sensor ID: 4869; Name: Ping INFO TId 628 CoreAutoDiscovery> Template Check; Device ID: 4868; Check ID: wmi; ERROR: 106ErrorMessage: #O69 INFO TId 628 CoreAutoDiscovery> Autodiscovery Finished: Device ID: 4868; Sensor(s): 1; Templates: <template>

Any ideas?

Sincerely, flyingjet

Article Comments

Hello there,

Thank you for your post.

This is probably caused by a bug in the PRTG version you are running. This is fixed in the newest PRTG version 20.1.57.1786. Please update and try the auto discovery again.

Kind regards,
Sasa Ignjatovic, Tech Support Team


Apr, 2020 - Permalink

Hello Sasa,

When we upgraded we thought it was the newest version, I guess not. When I checked for the update from SETUP menu i did pop up to install it and after that all works good.

Thanks!


Apr, 2020 - Permalink

Problems not resolved until the latest version(20.2.58.1629). Downgrade version 20.1.55.1775. On this version, everything works correctly.


Apr, 2020 - Permalink

I suspect that the fix Wmi sensors WMI sensors now show an according error message (PE069) if they do not find any items to monitor on the target device during the meta-scan on sensor creation. in version 20.1.57.1745 caused such a failure. Something does not work correctly in the module for checking WMI objects.


Apr, 2020 - Permalink

Hello,

Adding WMI sensors using the Auto-Discovery should work again in the latest version. Are you able to add the sensors manually? If so please send us a support bundle containing the log files from PRTG for further troubleshooting. For this, please open the support dialog "Contact Support" in the lower right corner of the WebUI. Please refer to this KB-topic.


Apr, 2020 - Permalink