The customer needs to generate a memory report and the Channel only displays Available Memory, It is known to select the Channel to be displayed through Select Sensors Manually--Objects, However, if a lot of customer equipment is time-consuming in this way, Is there any other way to quickly select the way of Channel to display the report required by the customer, thank you.
The sensor report only shows a single channel
Modified on 2025-06-10 15:36:16 +0200
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Hello,
Thank you for your post.
Unfortunately, you can only manually select what channels should be included into the report, this can not be automated or done in bulk for all sensors at once.
Kind regards,
Sasa Ignjatovic, Tech Support Team
Jun, 2020 - Permalink