Good Morning, we would like to read syslogs from a Cisco Communications Manager (CUCM) via SNMP, here we are mainly interested in the information that the RTMT tool can provide from the CUCM. Does anyone here in the forum have an appropriate template or an idea how we get to the goal?
Cisco Communicationsmanager (CUCM) - Syslog via SNMP
Modified on 2025-06-10 16:44:22 +0200
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Hello there
Thanks for reaching us
PRTG should be able to work with an SNMP Syslog receiver from any source that provides the standard configuration. Please see this guide:
https://www.paessler.com/support/how-to/syslogs-snmp-traps
As long as the target is configurable in this way, there shouldn't be a problem.
Dec, 2022 - Permalink