after swapping FI's the SNMP stopped working to the VIP address or the address of the primary, on the subs will work. Cisco support says to just use VIP but VIP doesn't work. Prior to the Hardware upgrades all IP's would work. anyone else have this issue?
UCS SNMP not working
Modified on 2025-06-10 16:48:44 +0200
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Hello Mike Hughes,
Could it be related to the same issue below, which Luciano Lingnau posted an interim solution about? Check it out!
https://helpdesk.paessler.com/en/support/solutions/articles/75825-snmp-cisco-ucs-system-health-sensor-error:-is-not-a-valid-integer-value
Regards
Jan, 2023 - Permalink