Solutions

set max bandwidth in sensor

Modified on 2025-06-10 16:50:42 +0200

Hi. is there a way to set the maximum bandwith in a sensor ?

Example: We have a VDSL with 100 Mbit/s. So i want to set the 100 Mbit/s as maximum value. Unfortunately, sometime the value is bigger than 100 Mbit/s (1200 Mbit/s, don't know why), so the traffic total tacho grafic is wrong and shows not the "real world".

Thx in advance Holger

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Hello,

while one can set the maximum bandwidth in the sensor, this would only be used for percentage calculation. In order to remove the incorrect traffic reads spiking above the maximum, please use the spike filter.

Dec, 2022 - Permalink

Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.

set max bandwidth in sensor

Article CommentsAttention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Search

Attention

Related Articles

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.