Can I monitor a cisco switch from another region
Thanks for the time and the answer!
Article Comments
Hello, thank you very much for the answer. I had previously read the article, but it was not very clear to me how to install such a remote probe on my switch equipment.
Is there a way to do it?
Sep, 2022 - Permalink
Hello Alejandra,
Yes sure, there is a couple of articles that will guide you the step by step and all the system requirements you will need to create a remote probe, please check the following articles:
- https://www.paessler.com/support/how-to/remote-probe-installation
- https://www.paessler.com/manuals/prtg/install_a_prtg_remote_probe#:~:text=4%20steps.-,Steps%20to%20Take,-To%20install%20a
I hope this will clarify your concern, if you have additional questions feel free to contact us
Sep, 2022 - Permalink
Hello Alejandra,
Yes sure, there is a couple of articles that will guide you the step by step and all the system requirements you will need to create a remote probe, please check the following articles:
- https://www.paessler.com/support/how-to/remote-probe-installation
- https://www.paessler.com/manuals/prtg/install_a_prtg_remote_probe#:~:text=4%20steps.-,Steps%20to%20Take,-To%20install%20a
I hope this will clarify your concern, if you have additional questions feel free to contact us
Sep, 2022 - Permalink
Hello Alejandra,
Thank you for contacting PRTG support.
If you want to monitor a device from another region what you can do is use a Remote Probe. Please use this article https://www.paessler.com/manuals/prtg/remote_probes_and_multiple_probes to verify all the configuration require for this type of monitoring
Sep, 2022 - Permalink