Hello,

we have a problem adding an IPMI sensor Error PE127 to an Intel server.

When running the command Ipmiutil.exe health -n IPADRESS - U USER -P PASSWORD the message

ipmiutil ver 2.96
ihealth ver 2.96
BMC manufacturer  = 000157 (Intel), product = 007d
BMC version       = 2.48, IPMI v2.0
BIOS Version      = SE5C620.86B.02.01.0013.121520200651
IPMI driver type  = 10        (ms)
Power State       = 00       (S0: working)
Selftest status   = 0055     (OK), last = 0055
Chassis Status    = 01 00 40 70 (on, see below)
        chassis_power       = on
        pwr_restore_policy  = stay_off
        chassis_intrusion   = inactive
        front_panel_lockout = inactive
        drive_fault         = false
        cooling_fan_fault   = false
        FP diag_button_disable  = allowed, button enabled
        FP reset_button_disable = allowed, button enabled
        FP power_button_disable = allowed, button enabled
PowerRestoreDelay = 0 seconds
Power On Hours    = 5117 hours (213 days)
BMC LAN Channels  = 1 2 3
Chan 1 AuthTypes  =
Set System Name to '192.168.201.9', ret = 199
ipmiutil health, Request data length invalid

What can we do to make the sensor work?

Article Comments

What is the error you get on PRTG when adding the sensor? It seems like the target device is currently using IPMIv2, this leads to an unexpected return value, since IPMIv2 is not currently supported by the sensor. The sensor should work with an older IPMI version.

Adapting the sensor to IPMI 2.0 is already in our backlog. Unfortunately, I cannot give you an ETA at this point in time.


May, 2022 - Permalink