Hi,
I've been trying for some time to get the SNMP HP ProLiant System Health sensor working on an HP Proliant Server.

I receive an error "No such object (SNMP error # 222). I have tried to solve it by following similar cases on the site but to no avail, it appear to be a common issue but the remediation is not clear.

Please could you help me troubleshoot this? All other sensors are working..

Here is the device uptime from the SNMP Tester 5.2.3 (works fine) {{{

26/02/2018 18:42:17 (2 ms) : SNMP V2c 26/02/2018 18:42:17 (3 ms) : Uptime 26/02/2018 18:42:17 (52 ms) : SNMP Datatype: ASN_TIMETICKS 26/02/2018 18:42:17 (53 ms) : ------- 26/02/2018 18:42:17 (54 ms) : DISMAN-EVENT-MIB::sysUpTimeInstance = 1049418 ( 2 hours 54 minutes ) 26/02/2018 18:42:17 (103 ms) : SNMP Datatype: ASN_TIMETICKS 26/02/2018 18:42:17 (105 ms) : HOST-RESOURCES-MIB::hrSystemUptime.0 = 1000396256 ( 115 days ) 26/02/2018 18:42:17 (107 ms) : Done }}}

Thanks

Article Comments

Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.

Could you try pointing the device to the ILO of the HP server and add the sensor again?

Kind regards,
Stephan Linke, Tech Support Team


Feb, 2018 - Permalink

Hi Stephan, I pointed it to the ILO and it now works.

Many Thanks


Feb, 2018 - Permalink