We have recently installed a Juniper SRX-1500 firewall configured as a fail-over pair.
I would like to know which vendor MIBs or any other MIBs I will need to import so that I can monitor the device.
Article Comments
Attention: This article is a record of a conversation with the Paessler support team. The information in this conversation is not updated to preserve the historical record. As a result, some of the information or recommendations in this conversation might be out of date.
Hello John,
we appreciate your contact.
It appears that the MIB's are common for all Junos OS SRX Series. Please have a look here:
However, when uncertain I strongly advise that you contact the device's vendor and ask. They will be able to tell us a lot more about their own SNMP Implementation than we'll ever be. Once you've obtained the relevantMIB's, please refer to this guide to import them:
Lastly, I encourage you to try out the template below before trying out MIB's, mainly because it makes the deployment a lot more simple:
Best Regards,
Luciano Lingnau [Paessler Support]
Oct, 2017 - Permalink
Hello John, we appreciate your contact.
It appears that the MIB's are common for all Junos OS SRX Series. Please have a look here:
However, when uncertain I strongly advise that you contact the device's vendor and ask. They will be able to tell us a lot more about their own SNMP Implementation than we'll ever be. Once you've obtained the relevantMIB's, please refer to this guide to import them:
Lastly, I encourage you to try out the template below before trying out MIB's, mainly because it makes the deployment a lot more simple:
Best Regards,
Luciano Lingnau [Paessler Support]
Oct, 2017 - Permalink