Mi problem is.
I do not know how make monitoring 3 segments, por example:
I have 10 segments: 192.168.1.X to 192.168.11.X, but i only need monitoring 192.168.1.X to 192.168.3.X.
I believe if in the console in configuration add my data in "Access for Windows", PRTG reading all computers contained in ADDC?
Article Comments
Hello,
Thank you for your KB-post.
Are you referring to Auto-Discovery that you want to run in three subnets?
If so, in the Auto-Discovery settings please choose "IP Selection Method -> IP with octet range" and type 192.168.1-3.0-255.
For more information, please have a look at
Auto-Discovery Manual.
If you want your PRTG to access all computers in a domain, it is necessary first to integrate an existing Active Directory into PRTG: https://www.paessler.com/manuals/prtg/active_directory_integration
Best regards
Sep, 2016 - Permalink
Hello,
Thank you for your KB-post.
Are you referring to Auto-Discovery that you want to run in three subnets?
If so, in the Auto-Discovery settings please choose "IP Selection Method -> IP with octet range" and type 192.168.1-3.0-255.
For more information, please have a look at Auto-Discovery Manual.
If you want your PRTG to access all computers in a domain, it is necessary first to integrate an existing Active Directory into PRTG: https://www.paessler.com/manuals/prtg/active_directory_integration
Best regards
Sep, 2016 - Permalink