This is in my home, so think small and personal: using the free version of PRTG.
Since I have a monthly cap on my internet I want to monitor how much each machine is using. I have a PfSense sending netflow information.
This is basically what I see on a 24 hours filter sensor:
http://www.upl.co/uploads/tipico1473353285.png
The problem that I have, and cant figure out, seems to be some kind of filter.
As you can see the machine 192.168.2.114 used 1517M of data, due to Netflix. The next hi-use machine on my network this day was 192.168.2.125 with 370M. But since there was huge traffic from one specific host, Netflix in this example, it was listed in the middle.
What I want, if possible, is to list see internet usage of my network machines only. I dont need to see the remote server here. Is it possible?
Hello,
Thank you for your KB-post.
The simplest solution in this case would be to add a device in PRTG for each computer that you want to monitor and then to add SNMP Traffic sensor or Windows Network Card sensor to each device.
For further bandwidth monitoring options, please have a look at this article: How do I discern excessive bandwidth usage with PRTG?
Best regards
Sep, 2016 - Permalink