Hell Team,
I am working on PRTG where i have to monitor the temperature of the Arista Switch. I added the OID using SNMP Custom Sensor and i am able to make it work but i am seeing numeric value instead of temperate ( i dont see Degree in Celsius to Fahrenheit.
Can you please share your thought on what i need in OID value?
Article Comments
The reading provided via SNMP will be either provided in Celsius or Fahrenheit, some devices may provide distinct OID's for each unit. Please check the device's/MIB's documentation.
PRTG can't natively convert from Celsius to Fahrenheit, but this is possible by deploying an additional Sensor Factory Sensor, please review:
As for the Unit displayed within PRTG, it can be set within the channel's settings, set it to "custom" and you'll be able to set any text/value as unit(no conversion is performed by changing this).
Best Regards,
Luciano Lingnau [Paessler Support]
Jul, 2016 - Permalink
The reading provided via SNMP will be either provided in Celsius or Fahrenheit, some devices may provide distinct OID's for each unit. Please check the device's/MIB's documentation.
PRTG can't natively convert from Celsius to Fahrenheit, but this is possible by deploying an additional Sensor Factory Sensor, please review:
As for the Unit displayed within PRTG, it can be set within the channel's settings, set it to "custom" and you'll be able to set any text/value as unit(no conversion is performed by changing this).
Best Regards,
Luciano Lingnau [Paessler Support]
Jul, 2016 - Permalink