I have written a script with separate channels using XML that works fine but have two questions/issues.
1. The data return is a percentage but no matter what channel settings I try, I cannot get the dials to show anything but all the way left for 0% or right for any percent higher than 0.
2. I want to add some text to the output with some additional info for each channel. Where/how can I do this, if at all?
Thanks!
Article Comments
Over time the dials have changed to have very random settings. For instance one at 22% is showing at the halfway point. I'll forward a screenshot.
As for the comments, this is dynamic data - number of FlexLM licenses in use of number of licenses.
Jun, 2016 - Permalink
Hi Kyle,
Thanks for forwarding the screenshot. The gauges will automatically scale depending on the maximal value which they received. You can click on the gauge to change the channel settings. Enable the limits of this particular channel and enter "0" for the Lower Warning and "100" for the Upper Warning limit. This will scale the gauge to 100.
Best regards, Felix
Jun, 2016 - Permalink
Hi Kyle,
Can you please forward a screenshot of the current graph? Do I understand you correctly that you want the "0%" on the very left side of the x-axis and the "100%" on the very right side?
It will not be possible to add information to each channel, but you could write information into the comments field of the sensor.
Best regards, Felix
Jun, 2016 - Permalink