Hello, how can i see both incoming and outgoing traffic ( like in https://cdn.paessler.com/media/scales/lightbox/common/files/screenshots/bandwidth-monitoring.png ). Have added regular Netflow v9 sensor, but it only shows a single graph. Also if i export netflow data from multiple interfaces on the same Cisco ISR router (wan, vpn tunnels, etc.), can they be separated and seen on the same or separate sensors?

Article Comments

Hello,

thank you very much for your KB-Post! Both of the requests are technically possible. But they will require the use of Filters in the Netflow Sensors, or even use of Custom Netflow Sensors with Custom Channel Definitions.

best regards.


Apr, 2013 - Permalink

would it possible to get some examples , best would be the custom chennel definitions from this picture https://cdn.paessler.com/media/scales/lightbox/common/files/screenshots/bandwidth-monitoring.png


Mar, 2016 - Permalink

Daniel, the screenshot is from a SNMP Traffic Sensor, it's channels cannot be achieved with any flow sensor.


Mar, 2016 - Permalink