When i add SNMP bandwith sensor, it doesn tget activated because no interfaces were selected (neither are shown any) well i used SNMP tester to run different tests and here are the results;
UP TIME Paessler SNMP Tester 3.2 Device: 192.168.1.3 01-Dec-12 2:53:09 PM (19 ms) : Start using SNMP V2c 01-Dec-12 2:53:09 PM (33 ms) : ------- 01-Dec-12 2:53:09 PM (38 ms) : Value: 3456642615 01-Dec-12 2:53:09 PM (43 ms) : Done
----------------------- New Test ----------------------- STANDARD INTERFACES Paessler SNMP Tester 3.2 Device: 192.168.1.3 Scanning Standard Interfaces... 01-Dec-12 2:53:15 PM Start Scan 01-Dec-12 2:53:15 PM SNMP Version: V2 01-Dec-12 2:53:15 PM Delay: 0 01-Dec-12 2:53:15 PM Force32: No 01-Dec-12 2:53:15 PM Single Get: No 01-Dec-12 2:53:15 PM GET: 1.3.6.1.2.1.2.1.0 01-Dec-12 2:53:15 PM Try 1 01-Dec-12 2:53:15 PM Start 3180480 01-Dec-12 2:53:15 PM Done 3180480 Status=0 01-Dec-12 2:53:15 PM 0 ASN_INTEGER,ASN_GAUGE: 28 01-Dec-12 2:53:15 PM Test 64bit 01-Dec-12 2:53:15 PM GET NEXT: 1.3.6.1.2.1.31.1.1.1.6 01-Dec-12 2:53:15 PM Start 3180480 01-Dec-12 2:53:15 PM Done 3180480 Status=0 01-Dec-12 2:53:15 PM 0 ASN_COUNTER64: 0 01-Dec-12 2:53:15 PM 64bit available 01-Dec-12 2:53:15 PM GET NEXT: 1.3.6.1.2.1.31.1.1.1.1 01-Dec-12 2:53:15 PM Start 3180480 01-Dec-12 2:53:15 PM Done 3180480 Status=0 01-Dec-12 2:53:15 PM 0 ASN_COUNTER,ASN_TIMETICKS: 0 01-Dec-12 2:53:15 PM Current: 1.3.6.1.2.1.31.1.1.1.2.101 01-Dec-12 2:53:15 PM GET NEXT: 1.3.6.1.2.1.31.1.1.1.2.101 01-Dec-12 2:53:15 PM Start 3180480 01-Dec-12 2:53:15 PM Done 3180480 Status=0 01-Dec-12 2:53:15 PM 0 ASN_COUNTER,ASN_TIMETICKS: 0 01-Dec-12 2:53:15 PM GetNext=1.3.6.1.2.1.31.1.1.1.2.102 Result: Found standard interfaces: No standard interfaces found
what device are you trying to monitor?
Dec, 2012 - Permalink