Hi KB friends!

I am running v15.3.19.4027 I have a Draytek 2925 router connected to a Netgear GS108tv2 smart switch and monitor bandwidth utilisation. The router uses 32bit counters, switch 64bit, both snmp v2 I have noticed that PRTG shows a wildly different value for traffic for these devices - eg the LAN port of the router will be showing utilisation of say 4691 kbit, the connected switch port shows 335248 kbit! All ports are gigabit connected. Comparing real time graphs of the ports, the graphs are identical, just very different values. Has any one else had this issue? I'd be grateful for any ideas. Thanks in advance

Article Comments

Hello,

This gaps are normally based on overflows of 32bit traffic counters.

Please see this article to enable overflow handling.

This article is about spike filtering.

Please note, you need to recalculate the cache to see the changes in the graph. Please perform all changes according the articles and after that go to "Setup" > "System Administration" > "Administrative Tools" and click on "Recalculate cache now". Please be patient it can take awhile to recalculate all data.


Oct, 2015 - Permalink