kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want PRTG to allow alerting when values fall...
Tue, 10 Jun, 2025 at 4:51 PM
Est-il possible de modifier l'adresse IP qui est pointer au moment du téléchargement du programme d'installation des sondes distantes ?
How to change the IP address pointing in the remote probes program download?
Article...
Tue, 10 Jun, 2025 at 4:51 PM
We are creating a new local probe to migrate our monitoring to a new domain/subnet. Is there a way to convert the local probe to a remote probe connecting to the new local probe in a different domain/subnet?
Article Comments
Hel...
Tue, 10 Jun, 2025 at 4:51 PM
Hi. We tried to add a performance monitor with wildcard, but it looks like it's not supported, so I wrote a script for Powershell and thought that if would be nice for others to also have it.
The code:
#CommandLine Example:
#"...
Tue, 10 Jun, 2025 at 4:51 PM
Dear all,
How can you change the status to warning/error if the amount of sessions is getting to high?
For example the active sessions count is 15
When user number 16 is logging in, I want the sensor to change to warning.
When user num...
Tue, 10 Jun, 2025 at 4:51 PM
hi,
we are receiving error #223 when we search for IP SLA on an ASR router. other SNMP functions are working fine.
Article Comments
Hi there,
the error 223 is mostly seen if the target device does not provide the required OI...
Tue, 10 Jun, 2025 at 4:51 PM
All other connections to the server are working, we have two App Pool monitors, both are erroring out. The wait operation timed out (Performance Counter error 0x102).
I love PRTG but these kind of stupid fails for no reason make me not...
Tue, 10 Jun, 2025 at 4:51 PM
Hello,
I am developing an application on Node-RED and I would like to use PRTG Network Monitor to handle the notification to the user. But I don't know how to tell PRTG to send the notification or change the sensor state to warning.
In ...
Tue, 10 Jun, 2025 at 4:51 PM
Hello. I am unable to add HDD health sensor. It just shows Preparing sensor settings and can't finish. just freezes on this. can anyone help me?
Article Comments
Are the access data for Windows systems entered in the device ...
Tue, 10 Jun, 2025 at 4:51 PM
Hi there,
I would like to expand on this knowledge base article which goes into detail on how the results from Linux System Load Sensors like "SNMP Linux Load Average are to be interpreted:
https://helpdesk.paessler.com/en/support/...
Tue, 10 Jun, 2025 at 4:51 PM
We are in need of enforcing HSTS in PRTG to allow only secure HSTS connections from web browsers to PRTG.
We are currently at this version of PRTG: 22.4.81.1532
Does this version of PRTG support HSTS, and if so what are the steps to i...
Tue, 10 Jun, 2025 at 4:50 PM
Hallo zusammen,
ist es möglich einzelne Sensoren für bestimmte Zeiträume (z.B. immer nachts) von der Überwachung bzw. von der Benachrichtigung auszunehmen.
Mir würde nur der Weg einfallen, einen Zeitplan zur erstellen und dann eine neue...
Tue, 10 Jun, 2025 at 4:50 PM
Hello,
this static ps script works as expected:
{{{ $XMLResult = @"
<prtg><result><channel>Server 1</channel><value>0</value></result><result><channel>Server 2</channel><...
Tue, 10 Jun, 2025 at 4:50 PM
Sometimes I am unable to see machines update on PRTG Servers when I newly add it. Even I disable OS firewall, Antivirus and also Endpoint security from host machines. So I want to see PRTG logs so that I can identify the issue.
Arti...
Tue, 10 Jun, 2025 at 4:50 PM
Hi, just recently the Zoom Service Sensor has started to show warnings, many of the components in the sensor have "Undefined lookup value" as Last Value and about only 10 or so have Operational status.
PRTG version 22.4.81.1532+
...
Tue, 10 Jun, 2025 at 4:50 PM
Hi PRTG Knowledge Base,
We're to a REST API to push out notifications using a PowerShell script. We need to use an authorization token to authenticate to the API. I'm wondering whether it's possible to store that token as a cr...
Tue, 10 Jun, 2025 at 4:50 PM
is there a way to calculate the internet usage using prtg ? i am not talking about bandwidth.
i want to find out how much data my company use per month or at any period of time
Article Comments
Hello,
The following articles m...
Tue, 10 Jun, 2025 at 4:50 PM
How to add mikrotik packet sniffing to ptrg monitor?
Thank you
Article Comments
Hello,
the PRTG packet sniffer sensor only works on network adapters used in a Windows computer. An option would be to setup a remote probe with...
Tue, 10 Jun, 2025 at 4:50 PM
Our servers are divided in 3 different groups: pilot, targeted and broad.
The pilot servers receives the Security updates the first Sunday after the second Tuesday of the month.
The targeted receives the Security updates the second Sunday...
Tue, 10 Jun, 2025 at 4:50 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to see static lines in graphs together ...
Tue, 10 Jun, 2025 at 4:50 PM
Is it possible to create icons that will change to reflect the group's or sensor's status, similar to what the "Sizeable Icon on Status Related Background" does but using custom icons?
Article Comments
This art...
Tue, 10 Jun, 2025 at 4:50 PM
Hi. is there a way to set the maximum bandwith in a sensor ?
Example: We have a VDSL with 100 Mbit/s. So i want to set the 100 Mbit/s as maximum value. Unfortunately, sometime the value is bigger than 100 Mbit/s (1200 Mbit/s, don't kn...
Tue, 10 Jun, 2025 at 4:50 PM
Hello,
Is there a way to utilise the Sunburst map view, but filter it to only show devices with a priority rating of 3 stars or higher?
Thanks
Article Comments
Hello,
such filtering is not implemented. However, a custom su...
Tue, 10 Jun, 2025 at 4:50 PM
Hi all,
we have been using PRTG for a few months now.
Is it possible to insert sensors from other devices into one device?
Let's take a Windows virtual server as an example. I would like to combine the data directly from the server (se...
Tue, 10 Jun, 2025 at 4:50 PM
Question I can't find the straight answer to. Please let me know if that is possible. v1, v2? And when used unclustered is that making any difference. https://www.paessler.com/manuals/prtg/notifications_settings#trap
Article Com...
Tue, 10 Jun, 2025 at 4:50 PM
Introduction
This sensor allows you to monitor the software version of your ProCurve switches and shows the model information in the sensor message. Version is divided into Major, Minor, and Patchlevel. Feel free to set limits accordingly...
Tue, 10 Jun, 2025 at 4:50 PM
Good afternoon, for the past three days I have been receiving error messages reporting Connection could not be established (80070005: Access is denied) (code: PE015) I am running 22.2.76.1705+, I believe that some recent Windows Server...
Tue, 10 Jun, 2025 at 4:50 PM
Would be nice to have a way to add ApplicationIntent=READONLY to the connection string. Maybe in the SQL v2 setting where you can select user application intent.
this would modify the connection string to include ApplicationIntent=READONLY...
Tue, 10 Jun, 2025 at 4:50 PM
Hi, my company uses prtg "ssh disk free" to monitor Ubuntu snap partitions. Snap partitions are (by default) very small, so fill up quickly and alarm during out of hours. I am trying to find a way to prevent snap partitions being ...
Tue, 10 Jun, 2025 at 4:50 PM
I'm trying to create a custom traffic light object that shows text based on whether status is Red, Yellow or Green, but i'm not sure where exactly i'd insert my html text. do i insert a whole new class for the htmbefore values? ...
Tue, 10 Jun, 2025 at 4:50 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want a sensor that reports when an switch po...
Tue, 10 Jun, 2025 at 4:50 PM
Hello,
I am wanting to have authentication for hosted PRTG to be connected to Azure AD, please?
Article Comments
We are currently working on implementing this feature, it is already in our Roadmap in the 'working on' sec...
Tue, 10 Jun, 2025 at 4:50 PM
Dear Team
We have multiple devices(Server, Storage, Firewall, Switch, Router, etc.) in our DC from different vendors/OEM's(HPE, IBM, Dell, Lenevo, Sun/Oracle, Cisco, Fortinet/Fortigate, Sophos, Checkpoint, Ruckus, Aruba, etc.).
All ...
Tue, 10 Jun, 2025 at 4:50 PM
I have this ps1 script. I would like to pass a unique parameter to the script I have put on the probe.
The script is as follows:
$vaerdi=(Select-String -Path ' $($args[0])\JBoss_DS\ModulusCore.txt' -Pattern '(?result" =...
Tue, 10 Jun, 2025 at 4:50 PM
The dropdown that lists available scripts for type 'SSH Script Advanced' is blank and I can't figure out why.
Other SSH sensors against this target work great.
The following directories exist: /var/prtg, /var/prtg/scripts, a...
Tue, 10 Jun, 2025 at 4:50 PM
Good day
Is there a way to do a search to all devices that only have 1 sensor, example ping and select them to eliminate?
Article Comments
Hello,
You can try to accomplish this task by following the steps below:
1- Go to th...
Tue, 10 Jun, 2025 at 4:50 PM
Hi,
I'm would like to monitor several Azure Service Bus Queues, do you have a sensor/method that can achieve this?
Article Comments
Hello,
Thanks for contacting us.
I understand that you would like to monitor Azure Ser...
Tue, 10 Jun, 2025 at 4:50 PM
I would like to send notifications to instant messengers such as AIM, Facebook, Gadu-Gadu,
IAX (Inter-Asterisk Exchange),
ICQ,
IRC (Internet Relay Chat),
Jabber,
MSN,
Netsend,
Tlen,
Yahoo,
Google Talk (GTalk),
Skype, or Bonjour. Is it poss...
Tue, 10 Jun, 2025 at 4:50 PM
I have installed PRTG Traffic Grapher 6 or IP Check 5.
How can I use the current PRTG version?
Article Comments
This article applies as of PRTG 22
Clean installation of PRTG
If you have been using IPCheck v5 or PRTG Traff...
Tue, 10 Jun, 2025 at 4:50 PM
Could you step by step to show me the procedure how to monitor the ports status and check the port poe status?
Article Comments
Hello,
Unfortunately, we do not have any guides for this. Perhaps your device vendor has any MIB f...
Tue, 10 Jun, 2025 at 4:50 PM
There are some important things to consider when you update from versions 7, 8, 9, and 12 to the latest PRTG version.
Article Comments
This article applies as of PRTG 22
Updating from PRTG 7, 8, 9, or PRTG 12
Read the follow...
Tue, 10 Jun, 2025 at 4:50 PM
Hello
I have uninstalled PRTG Monitor by mistake. Yes it's stupid. It was a test instance with only demo data, but it could be useful to retrieve it because it may be of use to, well, demonstrate PRTG to customers. I have saved the pr...
Tue, 10 Jun, 2025 at 4:50 PM
I have dozens of servers and all monitoring NTP with the SNTP sensor. However one SNTP sensor on one server is reporting this error. I have checked the server in question and found NTP to be working fine.
How do I trouble shoot this err...
Tue, 10 Jun, 2025 at 4:50 PM
I figured out that prtg uses an unencrypted ldap connection to my domain controller. The Domain Controller supports LDAPS. Other tools already connecting via ldaps on port 636 to this domain controler. What do I have to do to configure prtg...
Tue, 10 Jun, 2025 at 4:50 PM
I configured my PRTG webserver to use a secure connection. Which encryption methods does the PRTG webserver accept? Which ciphers are supported? Can I connect using RC4?
Article Comments
THIS INFORMATION IS OUT OF DATE
For m...
Tue, 10 Jun, 2025 at 4:50 PM
Hello,
Is there any way to parse an http custom TEXT response which does not follow the xml/json schema?
Maybe using regex to decode the response?
Thank you in advance.
Article Comments
Hello there,
Thanks for the KB post....
Tue, 10 Jun, 2025 at 4:50 PM
Hallo,
ich hab mittlerweile sehr viele Sensoren und NotificationTemplates in meinem PRTG und das System von meinem Vorgänger geerbt. Ist es irgendwie möglich, anhand des NotificationTemplates zu sehen, an welchem Sensor das hängt?
Ode...
Tue, 10 Jun, 2025 at 4:50 PM
Dear, after making a password change in the account that we used for the integration with AD, we have not been able to reconfigure, it indicates the following error
Error (Bad Request)
Validation of the provided data failed due to:
Active D...
Tue, 10 Jun, 2025 at 4:50 PM
After an update of PRTG, PRTG Server.exe does not start anymore. At the end of the installation, when the PRTG services try to restart, I get the following error message:
PRTG Webserver could not be started properly.
Signature of C:\Progr...
Tue, 10 Jun, 2025 at 4:50 PM
I know it is possible to monitor certain services with SNMP and the SNMP Library sensor, but I want to restart the service in case of an error, too. Additionally, I do not want to use the SSH Script sensor for performance reasons.
Is ther...
Mon, 18 Nov, 2024 at 11:11 AM
Hi,
Is there a way that I can select a one time change of status on the PRTG for the connection status handling?
For example right now the settings sets at ignore all disconnected states and I want to apply the show status for disconnect...
Tue, 10 Jun, 2025 at 4:49 PM
Hello,
What is the problem with following code?
import sqlite3
import json
def sl():
conn = sqlite3.connect('cidb.db')
cur = conn.cursor()
cur.execute("SELECT cisdb FROM sw1;")
one_result = cur.fetcho...
Tue, 10 Jun, 2025 at 4:49 PM
Hello community,
we need to carry out hundreds of locations and would like to automize this as much as possible. For this we are working wich templates for devices which works good, but we are looking for something similar for structures....
Tue, 10 Jun, 2025 at 4:49 PM
I use Zoom for video conferencing, meetings, etc. How can I monitor this with PRTG?
Article Comments
This article applies as of PRTG 20
Monitoring Zoom with PRTG
Important notice: As of PRTG 20.3.61, PRTG comes with a native...
Fri, 2 May, 2025 at 11:43 AM
Hi,
I've been trying to figure out a way to create a schedule for a group of devices so that they are not monitored for a few hours each week while they are being patched and rebooted. I tried using the scheduler but when using this, ...
Tue, 10 Jun, 2025 at 4:49 PM
Heya. I would like to monitor some backup jobs with the file sensor. All good so far.
Now what's breaking me is that some backups run 4 times a week.. and guess what - The week has 7 days! I would like to define custom times when the ...
Tue, 10 Jun, 2025 at 4:49 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to have Native DELL EMC PowerStore &...
Tue, 10 Jun, 2025 at 4:49 PM
I would like to link to another map in my PRTG dashboard. How can I do this? Moreover, is it also possible to embed a map into another one?
Article Comments
This article applies as of PRTG Network Monitor 19
Nest Maps in PRTG ...
Tue, 10 Jun, 2025 at 4:49 PM
I would like to retrieve information on certain indicators such as availability of systems of more than one PRTG installation and show this data on one dashboard.
How can I summarize data of different sensors on different PRTG installatio...
Tue, 10 Jun, 2025 at 4:49 PM
I use join.me for video conferencing, meetings, etc. How can I monitor this with PRTG?
Article Comments
This article applies as of PRTG 20
Monitoring join.me with PRTG
With PRTG, you can monitor join.me out of the box with t...
Tue, 10 Jun, 2025 at 4:49 PM
I use GoToMeeting for video conferencing, meetings, etc. How can I monitor this with PRTG?
Article Comments
This article applies as of PRTG 20
Monitoring GoToMeeting with PRTG
With PRTG, you can monitor the overall status of...
Tue, 10 Jun, 2025 at 4:49 PM
I use RingCentral for video conferencing, meetings, etc. How can I monitor this with PRTG?
Article Comments
This article applies as of PRTG 20
Monitoring RingCentral with PRTG
With PRTG, you can monitor RingCentral out of th...
Tue, 10 Jun, 2025 at 4:49 PM
Is it possible to integrate ScriptRunner into PRTG? What steps do I need to take?
Article Comments
This article applies as of PRTG Network Monitor 19
Integrating ScriptRunner into PRTG using Notifications
PRTG monitors the a...
Tue, 10 Jun, 2025 at 4:49 PM
PRTG can send notifications but it does not track these notifications to make sure that they are received and resolved. Is it therefore possible to integrate Derdack Enterprise Alert into PRTG? What steps do I have to take?
Article ...
Tue, 10 Jun, 2025 at 4:49 PM
I would like to disable notifications to SMS för the sensor "Common SaaS Check" under the device "PRTG Core". But I am not able to perform any changes for this sensor under the menu "Notification Triggers".
T...
Tue, 10 Jun, 2025 at 4:49 PM
Hello Team,
I just recently change my firewall port for accessing it from 443 <https> to custome port and its giving me alerting http forbidden. i want to poll an individual device from specific port. can anyone suggest if its posib...
Tue, 10 Jun, 2025 at 4:49 PM
Hey there,
I am wondering when will the new UI/API go into (public) Beta testing? I'm very hesitent to try the Alpha on production. Will there be a way for users to decide if they want to use the new UI or the old UI while it is still...
Tue, 10 Jun, 2025 at 4:49 PM
I would like to ask the following question.
We currently have an environment that we are not using for production elements.
We would like to reuse the same license for a new environment in order to re-balance with production elements
...
Tue, 10 Jun, 2025 at 4:49 PM
We are using SNMP service checks.
When a service is starting no alert send only when a service is stopped.
Any idea how to fix this?
Article Comments
Hi there,
Do I understand that you want to reverse the default settings ...
Tue, 10 Jun, 2025 at 4:49 PM
Dearest,
We have a customer who runs a weekly cleanup (as part of a bigger software solution) on their servers and the update history always gets removed aswell.
Is there a way to get rid of the 'Update history does not contain any ...
Tue, 10 Jun, 2025 at 4:49 PM
Hi All
Is it still possible to monitor the length of a JSON array with the new Rest Custom v2 sensor?
I know it is possible within the Rest Custom Sensor (v1?) with a template and the len() function as value: "value": len($....
Tue, 10 Jun, 2025 at 4:49 PM
I thought I should give back to the forum/community which has helped me a lot over the years. I've seen a lot of people writing PowerShell which builds text manually for JSON output. That's really fraught with danger in lots of ways...
Tue, 10 Jun, 2025 at 4:49 PM
Hallo,
Wir haben neue DELL Poweredge im Einsatz. Gerne würde ich diese mit den PRTG Dell Sensoren überwachen. (Dell Poweredge System Health)
Leider erhalte ich immer eine Fehlermeldung:
Could not create the SNMP Dell PowerEdge System H...
Tue, 10 Jun, 2025 at 4:49 PM
Hallo,
ich würde gerne den IMAP-Sensor nutzen, um Backup-Mails zu überwachen.
Das Postfach liegt allerdings nicht im Netz, sondern ist ein normales IMAP-Postfach bei Ionos. Ist das überhaupt möglich? Ich habe nirgends eine Möglichkeit gefun...
Tue, 10 Jun, 2025 at 4:49 PM
Our partner company has their own PRTG core server with about 40 devices on it and no remote probes right now. They want us to take over management of this system. What we'd like to do is add a remote probe at their site runs from our...
Tue, 10 Jun, 2025 at 4:49 PM
Hallo Zusammen,
wir haben als MSP bei einigen Kunden einen Pending Reboot Sensor, welcher in der Registry einen Eintrag überprüft, ob der Windows Server einen ausstehenden Neustart hat oder nicht.
Soweit so gut. Wir setzen hierzu in den...
Tue, 10 Jun, 2025 at 4:49 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want PRTG to provide complete SNMP trap mana...
Tue, 10 Jun, 2025 at 4:49 PM
Hi,
I just wanted to ask if there is a solution to my syslog receiver sensor keeps getting an alert warning every now and then.
thanks
Article Comments
Hello Dear customer,
Thank you for contacting PRTG support.
I wil...
Tue, 10 Jun, 2025 at 4:49 PM
Hello,
I'd like to analyse sensors results (on my PRTG serveur V22), I activated result handling on a specific sensor to write result in a TXT file, but there's no directory named LOGS under PRTG Network Monitor.
I took a look ...
Tue, 10 Jun, 2025 at 4:49 PM
Hello All,
I receive a question from a colleague if its possible to monitor the status of Adobe Cloud service, like on the official adobe site (https://status.adobe.com) in PRTG.
Unfortunatly I can't find anything in PRTG or in the KB...
Tue, 10 Jun, 2025 at 4:49 PM
Hello,
I'm testing a simple Powershell script, and the behaviour is rather stranger.
My script is:
$pathcounter = (Get-ChildItem -Path C:\Windows).count
Write-Host $pathcounter
#returning PRTG XML data
"<prtg>"
...
Tue, 10 Jun, 2025 at 4:49 PM
Is it possible to capture events on a Windows server, and report if the rate of which they come in increases drastically.
Or to report if certain events are seen?
Article Comments
Hi Mark,
I would recommend to use the WMI Even...
Tue, 10 Jun, 2025 at 4:49 PM
Hello,
What is the best practice for executing a batch script on a remote server.
I have created a script in /Custom Senors/EXE and created a sensor on a remote server using this script but the script is executed on the PRTG probe.
Th...
Tue, 10 Jun, 2025 at 4:49 PM
I need to check all permisions on the prtg, how i can export group access rights massive to any format (csv, xml, txt, etc)
Article Comments
Hi Julio,
Thanks for your KB post. We do not have such a feature yet. If you are good...
Tue, 10 Jun, 2025 at 4:49 PM
Hi,
Our main probe is running in domain1.local, a second probe is running in domain2.local
We monitor a webserver in domain2 with the probe in domain2., this works OK.
I want to add an XML/EXE sensor to that for a specific query on the we...
Tue, 10 Jun, 2025 at 4:49 PM
Hi there!
Is it possible to paste icons (Red and Green alerts) in notification message, for example like this: "New alert %icon_sensr %sensor on %device."??
Article Comments
Hello,
You can use custom text for the Em...
Tue, 10 Jun, 2025 at 4:49 PM
I have followed the guide and set everything up in office365/Azure for the app but it keeps telling me The sensor could not authenticate with Microsoft 365.
Article Comments
Tue, 10 Jun, 2025 at 4:49 PM
Dear All,
I am new in PRTG, I am using trail version of PRTG to check the feasibility of my requirement.
How I can collect event logs from windows and linux to PRTG server.
If any one can suggest me.
Regards
Nitesh
Article Com...
Tue, 10 Jun, 2025 at 4:48 PM
Hello!
I had to restore PRTG Server with Veeam Backup
After restore and start the Server I got this error.
The WMI query does not return any results. The reason might be an issue with the host's WMI system. For more information, see h...
Tue, 10 Jun, 2025 at 4:48 PM
DID SNMP from sensor to prtg server support AES-256bit?
Article Comments
Hello,
Currently PRTG's SNMP sensors do not support AES-256. It's already planned for future versions, however there's no ETA yet.
Jan, 202...
Tue, 10 Jun, 2025 at 4:48 PM
Hi there, i would like to ask from the prtg sensor transferring data to destination of prtg server, within this path have AES256bit? as we need to comply the security. please do anyone know about this?
Article Comments
You can f...
Tue, 10 Jun, 2025 at 4:48 PM
Hi All
Please could someone confirm if there is a MIB to confirm actual translation stats from Cisco devices.
Some of the MIBs available provide data in seconds, where I am requiring a MIB that gathers stats on the actual translation th...
Tue, 10 Jun, 2025 at 4:48 PM
Hi forum,
i have a Effekta MD3000 UPS, which is unfortunately not listed in the list of known devices. I tried an automatic search, but only basic services are shown like IP-Address, HTTP and HTTPS. How can i monitor this device. It has S...
Tue, 10 Jun, 2025 at 4:48 PM
In System Administration, on the User Interface tab, there is a Performance Handling option in section PRTG Web Server.
What does the Limit features and delay display option do? Which features are missing when enabled?
Article Com...
Tue, 10 Jun, 2025 at 4:48 PM
I would like to know more about the limits of PRTG when it comes to evaluating flow streams received from my devices (Cisco, HP, Juniper, and others). Are there any special system requirements?
Article Comments
This article appl...
Tue, 10 Jun, 2025 at 4:48 PM
Moin together,
unfortunately I still have a 16 DSL connection at home with 10-11MBit/s effective.
It often happens that the line is completely busy and I do not know where the traffic comes from. I am looking for a simple and cheap solu...
Tue, 10 Jun, 2025 at 4:48 PM
Why do I get the error message
The flow processor has dropped flows. The reason might be that PRTG is not able to process the incoming flows fast enough. To resolve this issue, consider using remote probes. Also try to optimize your incl...
Tue, 10 Jun, 2025 at 4:48 PM
after swapping FI's the SNMP stopped working to the VIP address or the address of the primary, on the subs will work. Cisco support says to just use VIP but VIP doesn't work. Prior to the Hardware upgrades all IP's would work....
Tue, 10 Jun, 2025 at 4:48 PM
Hi,
I have the issue when trying to add a Cisco IP SLA sensor that in step 2 of 2 under IP SLA Specific, the message No IP SLAs available appears.
Why I click continue, I get this error message:
Oops... Nothing was selected, no senso...
Tue, 10 Jun, 2025 at 4:48 PM
When trying to add a user to a group it fails with
Error (Bad Request)
The homepage URL cannot be an external domain or host
Article Comments
Hi, thanks for your question.
Can you please raise a support ticket by clicking ...
Tue, 10 Jun, 2025 at 4:48 PM
