kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Explanation of the access rights management system in PRTG Hosted Monitor, which allows subscription owners to promote other users to manage and configure certain aspects of a PRTG Hosted Monitor instance. Access Rights Management You ...
Thu, 12 Jun, 2025 at 12:12 PM
This article applies as of PRTG 24.4.102 and multi-platform probe 3.0.0 NATS JetStream With multi-platform probe 3.0, we introduced data buffers. Data buffers store data when a connection drops, in this case, between a multi-platform remote pro...
Thu, 12 Jun, 2025 at 12:12 PM
I previously used the Python Script Advanced sensor but it is being discontinued. What benefit does the Script v2 sensor have? This article applies as of PRTG 24 Script v2 sensor The Script v2 sensor is custom sensor in PRTG that monitors...
Thu, 12 Jun, 2025 at 10:07 AM
This article applies as of PRTG 25 Client certificates You can authenticate a server that connects to PRTG with a client certificate. When you set up client authentication, it increases the security and data integrity of the messages sent from ...
Wed, 11 Jun, 2025 at 12:04 PM
I was wondering if there is a specific way to monitor a single application through SNMP regardless of PID?
The way i have my sensor set up now is through the custom string template against the OID 1.3.6.1.2.1.25.4.2.1.2.7432
The last 4 ...
Wed, 11 Jun, 2025 at 12:01 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want the PRTG cores/probes to be able to rem...
Wed, 11 Jun, 2025 at 11:57 AM
During a PRTG update, I got the following error message with the error code PE252:
The installer found a legacy version of PRTG that cannot be directly updated because the integrated database has to be converted first. To resolve this iss...
Thu, 12 Dec, 2024 at 4:45 PM
I would like to monitor my IoT and IIoT environments with PRTG to have an overview of all my IoT devices and IoT data. Is there a way to integrate my IoT devices into PRTG using Node-RED? Article Comments This article applies as of PRTG 22 ...
Fri, 6 Jun, 2025 at 2:59 PM
I want to use a script sensor to monitor used disk space of a volume on a Linux or Unix system via Secure Shell. How can I achieve this? Is there a script for this? Article Comments This article applies as of PRTG Network Monitor 12 Monito...
Fri, 2 May, 2025 at 1:44 PM
This article applies as of PRTG 25 Google authentication with PRTG Previously, you could use your traditional Google Account email (Gmail) and password to configure PRTG authentication settings for email notifications and various sensors. Begi...
Wed, 11 Jun, 2025 at 9:36 AM
Good afternoon to all.
first of all sorry for my bad english.
I have installed prtg last version and it works very well.
I am able to reach web interface from everywhere on my network
but, if I try to connetc trought web client form black...
Tue, 10 Jun, 2025 at 10:58 PM
Is it possible to display a sensor summary below a custom library map object representing the sensors in the the library?
Article Comments
Hello,
I'm afraid it's not possible, sorry.
Best regards
Jul, 2015 - Perm...
Tue, 10 Jun, 2025 at 10:58 PM
I monitor the system health of a Cisco ASA via SNMP. Unfortunately, there occurs a CPU hog on the ASA which I cannot explain. Is it possible that ASA monitoring with PRTG somehow causes this issue with my ASA?
Article Comments
T...
Tue, 10 Jun, 2025 at 10:58 PM
Hello,
Does applying Connection Status Handling (Show alarm when/for all disconnected) effects device performance and overhead?
I wish to apply those settings to switch with several hundreds network interfaces.
Regards,
Yaron
Artic...
Tue, 10 Jun, 2025 at 10:58 PM
Does Paessler offer an app for my BlackBerry?
Article Comments
PRTG for Android on BlackBerry
If you are running BB OS 10.3 or higher, you have access to the Amazon App Store, where you can download our PRTG for Android app. D...
Tue, 10 Jun, 2025 at 10:58 PM
We have PRTG Network Monitor 15.2.17.2804 with a Core Server and a remote Probe both Physical with enough hardware resources. some times the remote probe or local probe goes to Down Status & we have to reset the PRTG Probe Service for ...
Tue, 10 Jun, 2025 at 10:58 PM
Here is the scenario,
I have synthetic script for user login transaction created using selenium and configured it in Jenkins tool.
Jenkins executes this script every 10 minutes and if user login transaction fails , it sends an email alert...
Tue, 10 Jun, 2025 at 10:58 PM
Hi I have set up some sensors to monitor scheduled tasks, which work fine. however i would also like to define a time window of success.
For example, let's say a task is set to run once per day and it fails to run (note this is not th...
Tue, 10 Jun, 2025 at 10:58 PM
Hello,
I have set my notifications send log to Windows Event Viewer.
But when my SNMP sensor go down nothing it's send to Event Viewer. In log from sensor appear the message "State Trigger activated" but it never send to W...
Tue, 10 Jun, 2025 at 10:58 PM
Trying to add a sensor to a CISCO 3750 /
NAME: "1", DESCR: "WS-C3750-48TS"
PID: WS-C3750-48TS-S , VID: V05 , SN: CAT1117ZJAM
System image file is "flash:/c3750-ipbasek9-mz.122-53.SE2/c3750-ipbasek9-mz.122-53...
Tue, 10 Jun, 2025 at 10:58 PM
Hi
How can I be sure which probe is currently monitoring a device?
We have multiple probes and physical sites. Originally everything was sent from the master probe. Now we have other local probes (one at each site). If I click on a devi...
Tue, 10 Jun, 2025 at 10:58 PM
Hi there,
How do I create a WMI sensor to probe my Windows 2008 R2 server services e.g. printer manager service? All I want is to response running or Stopped back to the graph. If it is Stopped, PRTG should allow me to trigger alert. I...
Tue, 10 Jun, 2025 at 10:58 PM
I am monitoring windows event logs with wmi event log sensor.
I would like to configure email and syslog notificaton for all detected error event message.
How to do it?
Article Comments
Hi there,
First, you will need to enter ...
Tue, 10 Jun, 2025 at 10:58 PM
Hallo, ich möchte gerne einen Ordner im Netzwerk abfragen, ob Dateien in diesem Ordner sind, wann sie zuletzt geändert worden sind etc. Ist dies Möglich?
Article Comments
Das geht mit dem Ordner-Sensor und sieht so aus:
Der...
Tue, 10 Jun, 2025 at 10:58 PM
Do we have a method to know how long time all the alarms status change from "critical" to "clear"? also how long time do the people acknowledge the alarms? do we have such reports?
Because now we have an issue some peo...
Tue, 10 Jun, 2025 at 10:58 PM
I have made some custom status icons for my maps - these are larger versions of the default icons.
These have been added using custom-styles.css and a custom map object. They work great, except the map object also contains the standard st...
Tue, 10 Jun, 2025 at 10:58 PM
I have a Windows web server. I ran the auto setup and it has 2 http sensors, and FTP sensor and and RDP sensor.
My question is why does it have 2 http sensors? The server has 20 websites on it, so its not for each website. It also has ...
Tue, 10 Jun, 2025 at 10:58 PM
I need an email notification wehre the subject field is empty, but prtg says its mandatory and I need to write something.
Is there a way to leave the subject field empty in the email notification?
Kind regards
Paul
Article Commen...
Tue, 10 Jun, 2025 at 10:58 PM
How can I monitor the Exchange 2013 Imapproxy.
I need this as our CRM system keeps failing.
Thanks in Advance
Article Comments
What exactly would you need to monitor about it? is that information available via PowerShell?
J...
Tue, 10 Jun, 2025 at 10:57 PM
Hi,
When an interface name on a switch or router is renamed, this is not automaticly discovered by PRTG. When we run a auto-discover, the interface isn't renamed, but a new instance (sensor) is added with the new name. Therefore there...
Tue, 10 Jun, 2025 at 10:57 PM
Hallo,
the main goal of the use case here is to get an alarm, if an application hangs.
In my test case I have got an application that I have monitored for some days now via an WMI process sensor. So I have data within the channels "...
Tue, 10 Jun, 2025 at 10:57 PM
I set up SNMP in my linux device (Ubuntu 14.04.2 LTS). Tested the configuration using Paessler SNMP tester (https://www.de.paessler.com/tools/snmptester) from the Windows 2012 server where PRTG(version 15.3.17.2995 x64) is installed - it is...
Tue, 10 Jun, 2025 at 10:57 PM
Hello,
I own several Cisco Nexus 7000 switch, each with several hundreds active network interfaces being monitored.
Every 2-3 hours I receive an error message fro most of the interfaces:
No response (check: firewalls, routing, snap setti...
Tue, 10 Jun, 2025 at 10:57 PM
Hi,
All Linux hosts added thru auto-discovery have about 30 useless sensors called: Physical Disk: loop(x) and Physical Disk: ram9x).
We would like to exclude those sensors permanetly for future auto-discovery runs and newly added linux...
Tue, 10 Jun, 2025 at 10:57 PM
Hi,
I'm working with PRTG for a few months. I really like the product, it's the best graphical, lean, beatifull monitor product i've seen. But, as always there's room for imprevement. Here are my issues/thoughts:
Custom...
Fri, 6 Jun, 2025 at 11:26 AM
I'm getting the following intermittent error for a SSH Meminfo probe from Windows to Fedora 21:
The host's system is unable to process PRTG's command: "cat /proc/meminfo". (code: PE096)
Other SSH probes (disk free ...
Tue, 10 Jun, 2025 at 10:57 PM
Using stable version 15.2.16.2230 settings up a new factory sensor and having two sensors:
#1:disk_free_C_percent
Channel(11306,5)
#2:disk_free_D_percent
Channel(11306,7)
The #1 sensor/channel is in error state (limit on both source ch...
Tue, 10 Jun, 2025 at 10:57 PM
I have created a custom SNMP lookup file as outlined below.
<?xml version="1.0" encoding="UTF-8"?>
<ValueLookup id="APC-UPS_battery_status" desiredValue="2" xmlns:xsi="http://www.w3....
Tue, 10 Jun, 2025 at 10:57 PM
I am running on version PRTG Network Monitor 15.1.14.1778. Can PRTG create 95th percentile report or anything to show that Calculate the 95% value separately for in and out as i need to take the maximum of those two values ?
What i can s...
Tue, 10 Jun, 2025 at 10:57 PM
I am trying to add the same "WMI Service Monitor" Sensor to all the Windows servers devices to monitor if a specific services is running or not. I see the clone feature is one to one and I see where you can do a device template an...
Tue, 10 Jun, 2025 at 10:57 PM
Today one of our customer (useing PRTG Network Monitor) had some of his workstations showing this error: "80010108: The object invoked has disconnected from its clients".
What does it mean? How can we lead to it?
Thanks!
...
Tue, 10 Jun, 2025 at 10:57 PM
I am trying to use a powershell script to retrieve the complete version of a dll file. I'm using the following script based on another post I found here, however, the sensor only displays OK on the PRTG console. It does work perfectly...
Tue, 10 Jun, 2025 at 10:57 PM
When using the PRTG Windows GUI, it shows Internet Explorer security warnings. How can I stop these messages?
Article Comments
Configure Internet Explorer for PRTG Windows GUI
By default, the Windows GUI internally uses Inter...
Tue, 10 Jun, 2025 at 10:57 PM
Hallo,
wir haben einen Cisco 4500X als Router im Einsatz und fragen dieses System per Netflow v9 ab. In den Top-Verbindungen wird das übertragene Volumen nicht korrekt dargestellt. Bei einem Test wurde ein 4Gbyte große Datei zwischen zwei...
Tue, 10 Jun, 2025 at 10:57 PM
Hi,
I want sensor and a report that will monitor for when a list of usernames has logged into a device.
The report needs to pickup from the sensor and show what username has logged on to what device and at what time.
Is this possible?
...
Tue, 10 Jun, 2025 at 10:57 PM
I would like to be able to monitor external computers, ie systems we have access too but not on our LAN or even WLAN. So for example a machine which is on a complete different network but we can TeamViewer too for support.
Is this possibl...
Tue, 10 Jun, 2025 at 10:57 PM
We just upgraded to 15.2.17.2804. Now PRTG is uninstalling our time zone updates which is causing an error in our proprietary program.
Article Comments
Usually, PRTG doesn't uninstall any software. What lead you to this conc...
Tue, 10 Jun, 2025 at 10:57 PM
Hi,
We have a server with 48 cores CPU (2x2x12) , however PRTG WMI CPU sensors auto-discover only find 32 cores. What should I do to fix it?
Remark : The OS is Windows Server 2008
Thanks.
Article Comments
Dear Daniel
Thi...
Tue, 10 Jun, 2025 at 10:57 PM
Hello,
I have one web application running on a cluster of 3 servers. I have added these three servers as devices to prtg.
If I add the Perfcounter IIS Application Pool to one of these devices and then stop the pool on that specific ser...
Tue, 10 Jun, 2025 at 10:57 PM
Has any one out there attempted to monitor a multiplexer with PRTG? I have the MIBs from adtran. Will be giving it a go to see what i can all do, but curios if anyone out there has did this, my searches of the KB here and on google, yield n...
Tue, 10 Jun, 2025 at 10:57 PM
Hello,
We have a SNMP trap receiver sensor. We need it to work like this:
1. Trap received
2. Sensor is in alarm state
3. Alarm is validated
4. Alarm goes down, sensor goes to normal state
Is this possible with PRTG?
Worst case scen...
Tue, 10 Jun, 2025 at 10:57 PM
Is it possible, based on a certain sensor treshold or state (down/up) to trigger an output on any, but for instance above mentioned device?
We need to trigger several inputs (non IP) so we want to connect a IP based output unit (several o...
Tue, 10 Jun, 2025 at 10:57 PM
We have a group of Linux servers running SUSE Linux and we would like to monitor the NTP status. If we manually login to the servers we would do something like:
# ntpq -nc peers
which would return something like this:
remote ...
Tue, 10 Jun, 2025 at 10:57 PM
Hello,
I have PRTG sensor for syslog messages on my Probe, and Mikrotik and Ubiquiti devices send their syslog there.
I noticed that there is a problem with parsing syslog messages from Ubiquiti devices. For example: http://i.imgur.com/...
Tue, 10 Jun, 2025 at 10:57 PM
I am doing the following call:
$url = "https://10.1.7.13/api/table.xml?content=sensors&output=csvtable&columns=tags&username=portal&passhash=xxxxxxxx";
There are objects that are now showing up in the response ...
Tue, 10 Jun, 2025 at 10:57 PM
EXEXML Sensor returns PE231. I am trying to use a custom powershell script to return useful information on DAG status. The script runs fine when manually executed but I get the aforementioned error. Any advice appreciated. have checked a si...
Tue, 10 Jun, 2025 at 10:57 PM
What is the shortest data interval that PRTG reports on?
In what intervals does PRTG retain data?
How long does PRTG retain 1 minute data in 1 minute interval before rolling that data into its next interval? For example if 1 minute is ...
Tue, 10 Jun, 2025 at 10:57 PM
How can I change the heading of the report to look like my own way I don't need default heading.
Article Comments
Did you already have a look at this KB article?
It covers items like Changing the Report Header Image and Ch...
Tue, 10 Jun, 2025 at 10:57 PM
I would like to set alarm and warning thresholds on the SSH Load Average and SSH Load Average v2 sensors, but I can not find any place in the sensor or channel settings to effect that.
Where do I make that change?
Article Comment...
Fri, 6 Jun, 2025 at 11:27 AM
MS-DOS
WINDOWS 95
WINDOWS NT 3.5.1
WINDOWS NT 4.0
WINDOWS NT SERVER
WINDOWS 2000
WINDOWS XP
WINDOWS 7
SUN OS 5.6
SUN OS 5.7
SUN OS 5.8
HP-UX 11
MAC OS 8.6
LYNX OS (UNIX-like)
RED HAT LNUX
LINUX
TSX-32 (DOS)
...
Tue, 10 Jun, 2025 at 10:57 PM
I've just configured WSUS statistics, and most of the channels appear to be correct. However, the channel 'Computers up to date' show a value of 0, while my WSUS console shows that 18 computers 'need 0 updates' and have ...
Tue, 10 Jun, 2025 at 10:57 PM
Hi.
I have managed to change the background color of a graph (the plotcolor). Can you tell me how to change the color of the fonts? For example Legend font color.
Thanks
Article Comments
Sorry, the font and their color canno...
Tue, 10 Jun, 2025 at 10:57 PM
Hi
Is it possible to disable SSH for certain servers or globally. Currently we collect using SNMP + WMI.
I'm seeing syslog entires where it appears an SSH connection is being attempted.
thanks
Article Comments
Dear d_s...
Tue, 10 Jun, 2025 at 10:57 PM
I am unable to get a MIB file to import:
The file is:
DCSW-SSV-MONITOR-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
DisplayStri...
Tue, 10 Jun, 2025 at 10:57 PM
We are currently are trying to use the SNMP Trap receiver Beta to get real time updates from applications when problems arise. Upon testing this we noticed that PRTG doesn't do anything with the received trap until the polling period ha...
Tue, 10 Jun, 2025 at 10:57 PM
We have a SOAP Sensor on a vcenter which has deployed several sensors for each guest.
Three queries
We have increased the number of CPUs assigned to the guest, and it is not showing this change on the SOAP sensor for that guest. WE have r...
Tue, 10 Jun, 2025 at 10:57 PM
I want to import Astaro-mib.txt in the Paessler MIB importer and I receive this log:
Sucessfully included files: 1 of 1
Sucessfully imported OIDs: 0 of 0
OIDs that were useful for PRTG: 0
Is there a way to import Astaro-mib in Paessler?...
Tue, 10 Jun, 2025 at 10:57 PM
Hello,
For our project we need to receive traps in v2c and filter them in three cateogories:
hardware traps on the error channel
interface traps on the alert channel
all other traps on the messages channel
We have chosen the ex...
Tue, 10 Jun, 2025 at 10:57 PM
Hello. We track the dynamics install updates on computers by means of a standard sensor to PRTG WSUS (parameters "Computers up to date" and "Computers needing updates."). The graph displays the correct information is on ...
Tue, 10 Jun, 2025 at 10:57 PM
I have a number of "SNMP Printer BETA" sensors created and have created some custom value lookup files for the sensors to act the way I would like. It is very tedious to go through and assign this value lookup to each channel unde...
Tue, 10 Jun, 2025 at 10:56 PM
Hallo,
ich habe ein Problem mit den IBM System X Sensoren auf einen Windows Server 2008 R2.
Ich habe soweit alles ausprobiert, um den Fehler zu lokalisieren, jedoch ohne Erfolg.
Das Problem besteht im Wechsel, sodass die Sensoren nich...
Tue, 10 Jun, 2025 at 10:56 PM
Hello,
i am trying to create some usefull maps for our display in our department.
Background: we have several locations where we monitor our servers, wlan controllers, temperature sensors, etc. So I am trying to create a combination of ...
Tue, 10 Jun, 2025 at 10:56 PM
We montor logfile on local filesystem of PRTG probe system and use the File Content sensor. The logfile is rotated almost daily and when the logfile rotates the search string (error of some application) cannot be found anymore. This sensso...
Tue, 10 Jun, 2025 at 10:56 PM
Hello,
I am trying to use the API graph function to publish a graph in PNG format for a VMWare Performance sensor. However, I am interested only in the active memory sensor and while it is possible to show/hide different sensors from the ...
Tue, 10 Jun, 2025 at 10:56 PM
I created a custom EMI/UCP notification to send text messages directly through a landline. When we do maintenance the notification is paused and resumed after we’re done. I want to make sure the notification is not left in a paused state un...
Tue, 10 Jun, 2025 at 10:56 PM
My cisco devices get their ports renamed fairly frequently. At one point in time, descriptions would eventually update but that doesn't appear to be the case at this point. Is there a setting I may be missing that's not updating as ...
Tue, 10 Jun, 2025 at 10:56 PM
Can I use a Raspberry Pi mini-Probe to monitor a network with about 28 HP switches or should I setup a small windows probe on a cheap Atom processor?
Thanks in advance.
Article Comments
Make sure to get a raspberry pi 2, then ...
Tue, 10 Jun, 2025 at 10:56 PM
We are trying to monitor a cisco 4500x cpu. It works but only intermittently. when it shows down it gives the #223 err. noting is being changed on the switch or the probe. why is this intermittent?
Article Comments
Hello,
Than...
Tue, 10 Jun, 2025 at 10:56 PM
Been asked to put in a monitoring type system for a company, and have chosen PRTG, but have no clue on how to set it up. Will be purchasing when we get to the live enviroment, but at the moment I have it as a trail in the lab.
have plugge...
Tue, 10 Jun, 2025 at 10:56 PM
Last week we changed the access method to our PRTG installation from http to https. Now I have seen that with Firefox 26 or Chrome 31.0.1650.63 the used ciphersuite is TLS_RSA_WITH_AES_256_CBC_SHA. Is it possible to change these values that...
Tue, 10 Jun, 2025 at 10:56 PM
How can I solve this issue I set all time interval be the same for all sensors
Article Comments
Dear CelaniN
As first step, please reboot the computer which is monitored. This solves the bulk of connection issues of this kind....
Tue, 10 Jun, 2025 at 10:56 PM
Hi,
I'm requesting an UPS with SNMP to get for example "Battery time left in minutes".
I'm getting the value of 198 minutes.
Is there a way to display it like 3h 18 minutes ?
Thx in advance
Article Comments
H...
Tue, 10 Jun, 2025 at 10:56 PM
Bonjour,
J'ai une connexion internet limitée a 30Go par mois, il y a un appareil qui consomme énormément de data et je voudrai l'identifier!!!
Mon PC est un IMAC est ce que votre logiciel permet d'identifier l'appareil qui c...
Tue, 10 Jun, 2025 at 10:56 PM
Hi I am using your product on the unlimited demo at the moment (very good product by the way), and need to ask a question.
I have a 4 node Hyper-V cluster on windows 2008 r2 which shuffles the Hyper-V VM's around when a node fails.
...
Tue, 10 Jun, 2025 at 10:56 PM
Good day!
I have such problem: I want prtg to show me string values,
i.e. I have script, that peforms an SQL query and returns me 4 columns:
date\time | integer1 | integer2 | integer3.
PRTG shows message "OK" for this sensor, but ...
Tue, 10 Jun, 2025 at 10:56 PM
I am trying to add a Custom HTML element to a map. I am inserting this code into the HTML Before parameter :
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<iframe src="http://free.timeanddate.com/clock...
Tue, 10 Jun, 2025 at 10:56 PM
hi
i have a sensor which kind of wmiis. this sensor sometimes logs simulated error PE034. What is the PE034 ? Do i need take an action ?
Article Comments
Hi there,
A simulated error is set by a user, or by an API call. Pleas...
Tue, 10 Jun, 2025 at 10:56 PM
Can PRTG monitor the network connection between a remote probe and an IP address (where no remote pr
We would like to install PRTG in a host computer and set up remote probes for our agents. However, the network monitoring (QoS) that we want to measure is between the remote probes and a 3rd party server where we cannot install a remote pr...
Tue, 10 Jun, 2025 at 10:56 PM
Since the amount of sensors in VMs is limited by your support of 5000 sensors max, we would need a way to build a map that include sensors from multiple prtg core servers.
Article Comments
Hello tempero-sst,
If you need to che...
Tue, 10 Jun, 2025 at 10:56 PM
Hi , I installed PRTG last friday and it works fine, on saturday I follow a suggestion of PRTG to use SSL.....big mistake !
From that time it was impossible to use again, now, I also install again but maybe he recognized my previous insta...
Tue, 10 Jun, 2025 at 10:56 PM
I have a number of devices that are all using private IP addresses. I access them via port forwarding through a Cisco 881 router and everything works fine. I put forwards in for port 161 however I am getting an socket error #11044. Tested w...
Tue, 10 Jun, 2025 at 10:56 PM
I have multiple aironet 1140's that I would like monitor with PRTG. Just general parameters like cpu load, associated wireless clients etc. Maybe bandwidth usage too.
Out of the box, PRTG only sets up a ping sensor.
So I downloaded ...
Tue, 10 Jun, 2025 at 10:56 PM
Hi,
I have some questions regarding SNMP traffic/bandwidth sensor
what is the raccomended polling interval to monitor interface trughput (traffic in/out) in Cisco IOS router?
How PRTG calculate the bandwidth/traffic and which OID use?...
Tue, 10 Jun, 2025 at 10:56 PM
Hello,
is there a way to monitor active terminal session for 2012 ?
This sensors does not work with 2012.
WMI Terminal Services (Windows 2008) Sensor
WMI Terminal Services (Windows XP/Vista/2003) Sensor
thank you
regards
MArco T
...
Tue, 10 Jun, 2025 at 10:56 PM
i am trying out the sip options ping on my freepbx server, i am getting the result "entered username or password is incorrect".
i'm assuming that the sip credentials are a sip extension and secret
i tried command line...
...
Tue, 10 Jun, 2025 at 10:56 PM
I have a business application that creates backup files into a directory. The names of the files increment and I keep several days worth. I want to set off an alarm if new files have not been created in 24hrs.
Because of the older files ...
Tue, 10 Jun, 2025 at 10:56 PM
Hi everyone.
I'm monitoring a certain device that has a builtin DNS service in it.
I want to add some DNS sensors to resolve the records of certain webistes, but I need to make sure that the check is done specifically through the nam...
Tue, 10 Jun, 2025 at 10:56 PM
There was a brief mistake in the server time and was ahead by 12 hours.
When the timing was fixed, there was some data already collected ahead of time.
Now it is not generating the graph because the collected data timing is ahead.
How...
Tue, 10 Jun, 2025 at 10:56 PM
The sensor works great. Now I want to send an email notification when the sensor is triggered along with the detail of the sensor. The sensor is filtered on a specific Event ID.
Article Comments
Good to hear the sensor is work...
Tue, 10 Jun, 2025 at 10:56 PM
Hi,
Beginning to discover and love the flexibility of this software, just had 2 questions I can't seem to find answer to.
I'll start with the UI. I have multiple pings set up. When I click into the ping sensor, on most, the ro...
Tue, 10 Jun, 2025 at 10:56 PM
