kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
We use custom packet sniffer sensors in version 8. I see that the packet sniffer engine has changed to winpcap in version 9, and that content packet sniffer sensors are no longer supported. I wanted to check before we upgraded whether ther...
Tue, 10 Jun, 2025 at 10:56 PM
Hey everyone.
Just installed the trial version to see what PRTG is like. So far so good, it does everything we need.
However, we have an issue with some of the remote probes.
Every now and then, maybe a few times every hour, the Probe...
Tue, 10 Jun, 2025 at 10:56 PM
There are many sensors on our account. Is there any quick way such as a report to see which of the sensors are set to auto-acknowledge when they go down in monitor?
Article Comments
Hi Phil,
You can get a list of all objects w...
Tue, 10 Jun, 2025 at 10:56 PM
Hey,
We were wondering if it is possible (in the future?) to be able to automatically resume all pauzed sensors on a weekly/monthly basis.
We have some employees who forget they paused a sensor permanently instead of for x hours or usi...
Tue, 10 Jun, 2025 at 10:56 PM
Hello
We have a service that has 3 levels of service state and writes events to an event log ID's:
10:Up
11:Partial
12:Down
We are monitoring the event log for those ID's but are unable to report how much uptime, Partial uptim...
Tue, 10 Jun, 2025 at 10:56 PM
Hello,
i'm not be able to connect the PRTG Server from my LAN.
What work is ping to the PC and connect to PRTG on PC (127.0.0.1) but access from my LAN not working. Alos the Android App could not connect.
May be some firewall issue ...
Tue, 10 Jun, 2025 at 10:56 PM
"Sorry, the scan for available monitoring items has failed!
Could not create the sensor SNMP Traffic on device 10.10.1.166 (10.10.1.166).
Sensor does not get response from device. SNMP credentials are wrong or device does not suppo...
Tue, 10 Jun, 2025 at 10:56 PM
Hi,
We have running a cluster nodes based environment in our different sites.
Total have 2 nodes.
Does anyone could explain to me the bellowing status meaning, due to we found the devices either services were working well when we occurred...
Tue, 10 Jun, 2025 at 10:56 PM
Hello,
I am monitoring ESXi servers using VmWare Host Performance Sensor. It contains many usefull channels, but I have limited space in Map for Status Icon "Channel Gauges Small", so I can see only 5 gauges (out of 12). How c...
Tue, 10 Jun, 2025 at 10:56 PM
My server is open the https on the TCP 18080
i want to know how to monitor https://xxxxxxx:18080 which sensor we shoot be select.
Article Comments
Hello osnoop, we appreciate your contact.
Is that a webpage that you have runn...
Tue, 10 Jun, 2025 at 10:56 PM
As a disclaimer... the devices I monitor are mobile and I need to be able to derive the GPS coordinates from an onboard system.
My Question: I have a custom sensor that can give me the Latitude and Longitude, but the onboard system onl...
Tue, 10 Jun, 2025 at 10:55 PM
Is there a way to silence an alert by responding to the email? Just an extra step to log in and search / pause (which is hard from Iphone App) . I really dont want to put any "Auto Acknowledge"
Article Comments
If you ...
Tue, 10 Jun, 2025 at 10:55 PM
According to requirements of of one of our customers, we need a collector software that is able to anonymize the collected data. We need the first three octetts of the ipv4 address, we must not have the fourth octett. Basically the idea of ...
Tue, 10 Jun, 2025 at 10:55 PM
In the prtg enterprise remote client when I right click on something the context menu shows the code reference instead of the menu option. I could not see where to attach an image here so here is a dropbox link to a jpg showing what I mean....
Tue, 10 Jun, 2025 at 10:55 PM
I have created reports to measure WAN utilisation, IPSLA, etc. and I'm wondering if there's a way to have PRTG display the real time data against the actual maximum bandwidth on the circuit.
For example, on the Y axis, by default...
Tue, 10 Jun, 2025 at 10:55 PM
Hi!
Can someone help me to find a way do measure between two devices and not only between the probe and a device? The scenario is that I have an application that complains that it looses the connection to an sql-database a few times during ...
Tue, 10 Jun, 2025 at 10:55 PM
I have 8 ECMP (equal cost multi-path interfaces) interfaces connected to a router that I can see without any issues.
Is there any way to create an aggregate report on just these 8 interfaces? I want a total bytes in and total bytes out ...
Tue, 10 Jun, 2025 at 10:55 PM
i have a Fritz!Box 6842 LTE and after 30 GB Traffic Vodafone reduces the LTE-Speed from 50 Mbit to 384 kbit.
Know i want to monitor the used traffic for this month and the useable (50 Mbit before and 384kbit after the Trafficlimit) LTE-(D...
Tue, 10 Jun, 2025 at 10:55 PM
Hi
A HTTP sensor keeps on sending false alerts. We are unable to establish why this is happening as we have carried out checks on the server and nothing appears to be flagging up any issues. We have been forced to pause the sensor whilst ...
Tue, 10 Jun, 2025 at 10:55 PM
Is it possible to define a notification across multiple sensors? E.g., something like "if sensor1 and sensor2 are down then send notification Y, otherwise if just sensor1 is down, send notification Z"
It seems notifications (or ...
Tue, 10 Jun, 2025 at 10:55 PM
Is it possible to use scheme for e-mail and SMS notifications.
We have employees that work in shifts, the first person would require to get notification between 8:00 and 18:00. The one that is working on a emergency shift will get alarm no...
Tue, 10 Jun, 2025 at 10:55 PM
How can I sort alarms by time it was produced? Is there any way to configure a "date/time" column into alarm dashboard?
Article Comments
Dear Luis,
are you referring to the Alarms-Page in the Ajax-Webinterface of PRT...
Tue, 10 Jun, 2025 at 10:55 PM
is it possible to configure report on a fixed period with date/time start and date/time stop ?
Article Comments
If you want to look at a specific timeframe, you need to create a schedule first (https://www.paessler.com/manuals/p...
Tue, 10 Jun, 2025 at 10:55 PM
I'm trying to import a number of custom MIBs for specific AdTran carrier ethernet equipment and need help getting .mi2 files into the importer. It keeps giving me syntax errors but I cannot find anything that readily converts these. The...
Tue, 10 Jun, 2025 at 10:55 PM
So far the only placeholder that successfully resolve is the %sitename. Are the other placeholders in the list available for use in the POSTDATA section of the HTTP notification?
Thanks.
Article Comments
Hello vivacan,
There...
Tue, 10 Jun, 2025 at 10:55 PM
Hi, I'm trying to set up an Eventlog sensor that should change state to error when an Error event is logged in the Application log. But I dont understand how the sensor works.
1) The sensor never goes into error state even though an e...
Tue, 10 Jun, 2025 at 10:55 PM
Hi,
May I customize the subject of summarize notification, such like add the "%device" or "%name" placeholder ?
Article Comments
Hi Kelvin,
Sorry, those placeholders you mentioned won't work inside t...
Tue, 10 Jun, 2025 at 10:55 PM
We want to set notifications for all down sensors, but don't consider a disk at 8% to be down and don't want to receive same amount of notifications as if a system truly was down.
How can I change Disk space to be just a warnin...
Tue, 10 Jun, 2025 at 10:55 PM
I have MPLS VPN ,there are 23 remote servers , routers and switch, two servers are natted to a certain public ip addresses and they have internet access. How can I monitor internet connection in those natted servers in prtg. So far I have t...
Tue, 10 Jun, 2025 at 10:55 PM
For example, with the Traffic Sensor and the Volume trigger I get notifications when a traffic sensor shows more than 1 Gbyte transferred in 24 hours.
But I would like to get notifications if the traffic sensor shows less than 1 Gbyte tra...
Tue, 10 Jun, 2025 at 10:55 PM
I was wondering if there is a newer version of the remote probe configuration tool? (PRTGRemoteProbeCfg.exe) which i found on this post (https://kb.paessler.com/knowledgebase/en/topic/1563-how-can-i-automatically-deploy-and-configure-remote...
Tue, 10 Jun, 2025 at 10:55 PM
I am attempting to add a NetFlow v5 sensor, but in the configuration page it says "No Receive NetFlow Packets on IP available" and the setup fails.
The NetFlow v5 Tester program sees the network interface / IP address and works ...
Tue, 10 Jun, 2025 at 10:55 PM
Hi,
As the subject says, I would like an easy way to see if I have set up limits on all my sensors.
We recently had a server that stopped working because it ran out of disk space. Yes, the sensor was working, but no limits has been set...
Tue, 10 Jun, 2025 at 10:55 PM
My "Top 100", "Top 10" and other reports like those are not working anymore, it performs the process but for some reason gives back an empty report, like this:
http://s10.postimg.org/6apal3wo9/prtg_reporte_sin_nada.png...
Tue, 10 Jun, 2025 at 10:55 PM
Hi,
We are using a lot of the REST API, and are upgrading our systems to a JSON-based M2M service.
Do you have a list of all calls, and which one exists with a working JSON implementation?
We are struggling with /api/getsensordetails.xml an...
Tue, 10 Jun, 2025 at 10:55 PM
I have an SNMP trap receiver sensor set up at the top of my device tree, on the local probe device. It works as expected and receives SNMP traps from any device in the tree, which is what we want. However, the error message that is generate...
Tue, 10 Jun, 2025 at 10:55 PM
I want to add FontAwesome as a font in PRTG. I have updated the custom_styles.css as well as the htmlheader.htm to include the applicable stylesheets and links to the fonts. I consistently get a 404 on the files after confirming that they a...
Tue, 10 Jun, 2025 at 10:55 PM
Hello,
we have an issue with windowsupdate sensors giving an error "Timeout caused by wait for mutex (code: PE035)".
The servers that it needs to scan are rather slow and I think it is giving a timeout on the sensor. Where do I ...
Tue, 10 Jun, 2025 at 10:55 PM
Our application is instrumented with event tracing for windows(ETW) and we would like to create sensors to monitor our ETW events and trigger alams
Article Comments
As of right now, there is no sensor available that monitors ETW...
Tue, 10 Jun, 2025 at 10:55 PM
I would like to monitor ingress and egress traffic on a port separately. How do I get individual data for inBound and outBound traffic with PRTG?
Article Comments
This article applies to PRTG Network Monitor 14 or later
Separ...
Tue, 10 Jun, 2025 at 10:55 PM
Hi I just updated to the new PRTG V 15.3 , So it rebooted many times and each time starts saying cache calculation then the web interface gets too slow and disconnects , Though i see in task manager prtg services is still running and consum...
Tue, 10 Jun, 2025 at 10:55 PM
We are monitoring a linux server with several sensors. This is a Redhet 6.6 Enterprise Server (RHEL 6.6). Within the latest weeks our server freezes up with the message "audit: backlog limit exceeded". This error appears on the co...
Tue, 10 Jun, 2025 at 10:55 PM
Is there a way to monitor backpreasure in Exchange 2013? We have been getting alarms and EventID 15004 that explains there is an issue with Backpreasure. Where can I find these monitors, or is there a way to use Perfmon to monitor them?
...
Tue, 10 Jun, 2025 at 10:55 PM
Hi All,
We are using free version of PRTG.
Since yesterday bandwidth graphs are incorrect. Scale has reached up to 3 Gbps. Up on verification I found incorrect entry which is
8/15/2015 5:30:00 PM - 6:30:00 PM 1,371,613,962 KByte 3,14...
Tue, 10 Jun, 2025 at 10:55 PM
Hi,
I'm confusing about the problem if I will use different OS for each cluster nodes.
Is there any problem on the clusters which including different OS version, such like one node using 08R2, another use 12R2.
Thanks
Article ...
Tue, 10 Jun, 2025 at 10:55 PM
Is it possible to get different colored email alerts for different email types as all the emails we currently get are green.
It would be nice to have a red for something critical, orange for warning and all clear for greed which already is....
Tue, 10 Jun, 2025 at 10:55 PM
I was just wondering when there will be an upgrade to the iphone app so that you don't have to keep the app open for you to hear the alerting sounds. or have I just got the app misconfigured?? Currently running ios 5.0 on a 4S. I woul...
Tue, 10 Jun, 2025 at 10:55 PM
Hi Paessler,
i have some questions on how to set up bandwidth and traffic monitoring in our environment. We have 2 Netgear GSM7248R switches and a MS TMG firewall with 3 ports Internal, External and Guest network.
I monitor the total ba...
Tue, 10 Jun, 2025 at 10:55 PM
I have it set up to use an anonymous relay. The message actually makes it through and is removed on the backend by the IMAP side, but the sensor shows down due to the lack of secure connection....
Article Comments
Hi there,
W...
Tue, 10 Jun, 2025 at 10:55 PM
Hi All,
As per PRTG manual and Distributed monitoring with PRTG video, communication between Remote Probe and core server CAN be done via SSL.
But, as per the forum topic - Which ports does PRTG use on my system?:
"Connections be...
Tue, 10 Jun, 2025 at 10:55 PM
I would like to clear the IML logs for my HP ProLiant Servers
Article Comments
Please see this article for the commands to clear IML logs.
For details, please see the HP Support Center.
Nov, 2014 - Permalink
Tue, 10 Jun, 2025 at 10:55 PM
Ajax Error
13.4.6.3374 Sorry, there is no object with the specified id.
Article Comments
Hi,
may you please elucidate? Where exactly do you get this error?
Best regards
Nov, 2013 - Permalink
This error is first thi...
Tue, 10 Jun, 2025 at 10:54 PM
Good afternoon
We're reciving the below error when opening PRTG. We are able to load the page if we goto https://serverIP/dashboard.htm but the home page will not open.
I have restarted the PRTG Core Server service and this has no...
Tue, 10 Jun, 2025 at 10:54 PM
I am getting my reports in 3-5 parts, is there any way we can get this in single PDF file.
Article Comments
You have to edit the corresponding report template (residing under C:\Program Files (x86)\PRTG Network Monitor\webroot\r...
Tue, 10 Jun, 2025 at 10:54 PM
Are there any recommandations, what to install on a Windows Server 2012R2 to monitor tables in Oracle Schemas using ADO SQL (so without the Oracle SQL Sensor - because we do not want to place the sensor on the Oracle server but on the appli...
Tue, 10 Jun, 2025 at 10:54 PM
How can I monitor BSD systems with a PRTG Mini Prob
Article Comments
Hi there,
Did you already tried the default sensors which are supported by the Python Probe? You can follow This Guide to setup the Mini probe. If the native...
Tue, 10 Jun, 2025 at 10:54 PM
Hi All,
I have remote probe installed on a windows 2008 r server.
I have seen sensors which auto-restart service when it is down.
I have also gone through alternatives like PTFLauncher.
But, is it possible to manually restart a ser...
Tue, 10 Jun, 2025 at 10:54 PM
Hallo,
ich habe mit meinen PRTG zwei ESX Server überwacht welche auf IBM Maschinen laufen. Das Problem ist das der CIM Dienst wegen eines Bugs die Raidbattery immer als Warnung ansieht.
Dies tritt dann auch wie folgt in PRTG unter der Ü...
Tue, 10 Jun, 2025 at 10:54 PM
How can I automate monitoring onboarding and configuration for a server?
Example:
I want to script adding a server to PRTG and implementing the expected monitors for a web server in my environment.
Article Comments
Did you tr...
Tue, 10 Jun, 2025 at 10:54 PM
hello,
I made a content file sensor on linux samba share.
That work and it return a warning with the content that i configured.
But the sensor never passed to error, it still on warning.
I configured in the "scanning interval"...
Tue, 10 Jun, 2025 at 10:54 PM
How do I set the down state of the WMI Terminal Services Sensor? Or how can I have the sensor notify me if it goes above a certain number of users?
Article Comments
Hi there,
The sensor will create three channels:
Active Se...
Tue, 10 Jun, 2025 at 10:54 PM
Hi,
I have always used a ping sensor to ping google.com or another reliable site. This has worked well and provides an excellent report that shows the up-time of the internet connection.
The issue is that if my main probe's interne...
Tue, 10 Jun, 2025 at 10:54 PM
Hi,
I have a pretty straight forward Powershell script:
$variable = do something
If ($variable -eq "Something 1"){
write-host "0:All Good"
exit 0}
Elseif ($variable -eq "Something 2"){
write-host "1:Not...
Tue, 10 Jun, 2025 at 10:54 PM
We want to monitor services (so the service mail i.e.). For this I'm looking for an idea how to combine the status of multiple sensors to give me one status.
An easy example: the service is mail. If the transport service on one of my C...
Tue, 10 Jun, 2025 at 10:54 PM
I need a report for bandwidth sensor where bandwidth utilization is more then 70% and less then 30% and rest of the devices will not be included in that.
Thanks in advance.
Article Comments
Hi Anup,
I'm afraid that this ...
Tue, 10 Jun, 2025 at 10:54 PM
I'm trying to monitor the size of a file via ftp. Something similar to the "File" sensor, my issue is that SMB is not an option for the version of OS we are working with. This is what I'm trying to accomplish:
1. log in...
Tue, 10 Jun, 2025 at 10:54 PM
I have an open ticket with Paessler but thought I'd throw it out here too.
I have PRTG (latest version) installed on a Server 2012 R2 VM, running under a Server 2012 R2 host. Plenty of resources - SAS drives, 8GB RAM allocated to the ...
Tue, 10 Jun, 2025 at 10:54 PM
Since the Windows updates of september, certain hosts on our vmware platform can't be monitored anymore. The error PRTG gives me is: 800706B5: The interface is unknown
I can't find anything about this error in relation to PRTG. Is...
Tue, 10 Jun, 2025 at 10:54 PM
Hi All,
I'm attempting to put together a custom HTTP content sensor with some screen scraped data from a website.
The background of the concept is we have a national power provider that publishes network load on a dashboard on the...
Tue, 10 Jun, 2025 at 10:54 PM
We want to change body of mails which PRTG send for reports generated in weekly basis, please guide me how can we do that?
Article Comments
Have a look at How do I modify PRTG's report templates :)
Aug, 2015 - Permalink
Tue, 10 Jun, 2025 at 10:54 PM
Hello All
In my current infrastructure i have several Vyatta VPN servers. I can monitor the memory etc of these servers without a problem. But i am a bit stuck. How can i monitor the actual tunnel status and any changes (up/down) in th...
Tue, 10 Jun, 2025 at 10:54 PM
the Windows system to be monitored runs under VMWare ESXi.
I want to analyse this system via WMI with PRTG.
Is there any problem ?
Article Comments
Hi Jo
There is no big difference between monitoring a visualized or a physical...
Tue, 10 Jun, 2025 at 10:54 PM
Goodmorning,
I inserted a table in my maps where I can see the list of WARNING/DOWN sensors (with big font, and no other text in the table so that I can easly read the error even from far away), is there a way to make the background color...
Tue, 10 Jun, 2025 at 10:54 PM
Hi there
I'm seeing the below in the logs, which is very lightly loaded (only 4 sensors plus the local probe)-the machine has 4Gb RAM , and has a high spec CPU. I've never seen this before, and results in gaps in the graphs-which ar...
Tue, 10 Jun, 2025 at 10:54 PM
Hi all,
I'm adding a sensor that call a webservice and read a property of a JSON answer. All is ok but PRTG instead of report only the value (as example: "0d2") it returns "Node xxxx/yyyy holds value 0d2". How I ca...
Tue, 10 Jun, 2025 at 10:54 PM
I've done a quick KB search and have not found an answer to my question -- is there a way to specify a default tab for a given sensor?
That is to say, clicking on a link to a sensor from within a device page will always take me to the...
Tue, 10 Jun, 2025 at 10:54 PM
Hi,
i have PRTG 13.3.6.3110+ in use. On several switches i want to monitor the traffic of a VLAN.
I can only monitor interface vlan's, but thats not what i want.
Is it even possible?
Greets Tino
Article Comments
This...
Tue, 10 Jun, 2025 at 10:54 PM
Hi all
Does anybody know if its possible in the IMAP Sensor to search for multiple keywords?
I use the IMAP Sensor for checking if our backup was successful. The mails go into a specific mailbox and if any email has the subject ERROR the ...
Tue, 10 Jun, 2025 at 10:54 PM
Hallo,
nach welchen Kriterien werden die "Normal States" eines VMWare Hostserver Hardware-Zustand (SOAP) Sensors gewählt? Werden alle Sensoren ausgewählt deren Status sich im vCenter von "Normal" auf "Warning"...
Tue, 10 Jun, 2025 at 10:54 PM
Hi, we are using PRTG to Monitor the Bandwitdh on a Windows 2012R2 Server. On the same Server we run KiwiSyslogServer that is listen on the Syslog Port 514. When we install PRTG the KiwiSyslogServer is not starting anymore. I think they hav...
Tue, 10 Jun, 2025 at 10:54 PM
I noticed that whenever we do updates after the update completes ALL sensors that were paused previous are now unpaused and sometimes I have 200+ that I have to go back and repause, IF I remember them all...
Any suggestions how to keep ...
Tue, 10 Jun, 2025 at 10:54 PM
I saw this had been asked 5 years ago or so, but wanted to see if the the newer releases had any way of dealing with this.
When we have servers with multiple IP addresses bound to them PRTG obviously detects the server twice. Is there any...
Tue, 10 Jun, 2025 at 10:54 PM
I am having issues with dropped connectivity between two sites and I notice it when my replication app emails us it lost connectivity but it goes back to normal after a few minuets once or twice a week but the VPN never drops.
The other ...
Tue, 10 Jun, 2025 at 10:54 PM
Hello,
I am monitoring disk space on client computers with PRTG.
Those clients as opposed to servers are not powered up all the time.
It is expected for those clients to be down and I do not wish to monitor their connectivity.
Out of 20...
Tue, 10 Jun, 2025 at 10:54 PM
Just curious, I see that under the probe health, its set at 100 open requests to go into warning. Is that really an issue if you have zero delay low cpu and memory across the board? The console performance is great as well...I have close ...
Tue, 10 Jun, 2025 at 10:54 PM
Hello guys and girls,
This isn't really a question but rather a remark on the new custon snmp table sensor you guys put into the latest release of PRTG.
We have got this working for our ASA firewalls. It monitors the amount of con...
Tue, 10 Jun, 2025 at 10:54 PM
I belong to a french Telecom Company (SAGEMCOM)
We are evaluating your product for traffic analysis of an Operator Telecommunication Network.
we are using the free edition of the version 8 (limited to 10 sensors) the last one (PRTG Network ...
Tue, 10 Jun, 2025 at 10:54 PM
When use SOAP to monitor VMWARE host performance, password will be sent in plain text? If yes, anyway to avoid
Article Comments
Hello,
Thank you for your KB-Post. It's not quite clear, what you are referring to. Within the...
Tue, 10 Jun, 2025 at 10:54 PM
I'm trying to monitor three databases on a single Oracle server, each with a different SID (call them SID1, SID2, and SID3). I'm using the Oracle SQL v2 sensor. (Previously I had been monitoring all three databases with older sensor...
Tue, 10 Jun, 2025 at 10:54 PM
Hallo PRTG-Team,
gibt es die PRTG Enterprise-Console auch auf Deutsch, meine Kollegen nutzen das Installationsfile aus dem Punkt "Konfiguration" unserer Deutschen PRTG-Installation.
Bei Installation fragt das Paket auch welche...
Tue, 10 Jun, 2025 at 10:54 PM
Hi
Is it possible to generate report only for exceptions of high bandwidth, high CPU, high memory, device down, etc?
Daily the report should be generated and sent to specific IDs.
Regards,
Akhil
Article Comments
Dear akh...
Tue, 10 Jun, 2025 at 10:54 PM
Hi all,
Please help me to How to prevent duplicate NAME device or IP Device when i add the new device on PRTG?
Article Comments
Hi tanloc13.
Can you please be a little bit more specific? I assume you SCAN your network for devi...
Tue, 10 Jun, 2025 at 10:53 PM
Hi.
I have a question about using network maps with devices that have sensor dependancies set up.
For example.
I have 10 devices. The Switch is connected to the router, and the PC's are connected to the switch.
Router
Switch
...
Tue, 10 Jun, 2025 at 10:53 PM
I'm looking for a way to monitor the count of users attached to a session on a file server. I am trying to get an accurate count of how many concurrent users we have so that I can use these numbers for a VDI proposal and its licensing c...
Tue, 10 Jun, 2025 at 10:53 PM
We upgraded service desk server that uses apache tomcat to run. Tomcat version changed from 7.0.55 to 7.0.62 After upgrade 2 PRTG HTTP XML/REST Value sensors that monitor that server stopped working. They show "An unexpected error occu...
Tue, 10 Jun, 2025 at 10:53 PM
Hello,
I use the Windows Update Status Sensor for my virtuel Windows Server 2008 R2 / 2012 R2. The sensors worked fine on both. Since few weeks the sensors on all Windows Server 2008 R2 throw the PE035 error: Timeout caused by wait for mute...
Tue, 10 Jun, 2025 at 10:53 PM
hai fellas,
i have some sensor in prtg to monitor my checkpoint firewall,
but i don't know details of that sensor
how to check that sensor in my checkpoint?
my checkpoint run in IST 2010 i686 i686 i386 GNU/Linux
Article Commen...
Tue, 10 Jun, 2025 at 10:53 PM
I need to upgrade the software but do not have internet access.
Article Comments
How about just download the newest version on a different Computer and install it over the actual installation?
Aug, 2015 - Permalink
Dear ...
Tue, 10 Jun, 2025 at 10:53 PM
For example, when a sensor cannot be reached due to "DNS could not be resolved Socket Error # 11004 (socket error # 11004)", I want it to be a Warning or Unknown instead of Down.
Article Comments
I'm afraid in thi...
Tue, 10 Jun, 2025 at 10:53 PM
Hello Experts,
I am trying to implement anomaly detection using prtg. What I am trying to do is I have two sensors one is for bandwidth and the other one is for users(fetching user count using WMI sensor) Now I want to compare these two s...
Tue, 10 Jun, 2025 at 10:53 PM
