kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
After updating from PRTG 8.x I have some SNMP sensors that do not work anymore.
All of these sensors seem to have in common that they are located in in the same network segment(s) and my PRTG system / probe system is a multihomed system (...
Tue, 10 Jun, 2025 at 10:52 PM
After updating from version 8 to the current version of PRTG Network Monitor either the core server process or a probe have problems with the web server or monitoring tasks , e.g. they can not connect to systems beyond an ISA server (or sim...
Tue, 10 Jun, 2025 at 10:52 PM
Hello, I would like to delete one bad value on a calculated sensor or set the spike filter on a calculated sensor.
The sensor calculates PUE values for datacenters and it should not be possible to have this value below value 1.
Due to r...
Tue, 10 Jun, 2025 at 10:52 PM
We use the prtg network monitor.
I want to to configure notification for a distribution group email address.
When the prtg uses a user address the test email is sent, but when the email address is a distribution group on o365 email is not ...
Tue, 10 Jun, 2025 at 10:52 PM
Hello,
We are using paessler to do a lot of monitoring within our org. I am more of a developer then an admin but I have asked our network team and they aren't certain if this is possible.
We have a web application that will fro...
Tue, 10 Jun, 2025 at 10:52 PM
Hi,
I recently use a HTTP content sensor to check file copy time.
The script is :
$time=Measure-Command -Expression {Copy-Item sourcepath destpath -Recurse -Force -Confirm:$False}
write-host "<html>"
write-host "<b...
Tue, 10 Jun, 2025 at 10:52 PM
I would like to send SNMP Trap Messages or report on them. I have a Notification configured with the placeholder %trapmessages configured, but how can I send those messages that will include that placeholder? I don't see any triggers ...
Tue, 10 Jun, 2025 at 10:52 PM
The Windows on your probe system is too old. Please update to at least Windows Server 2008 or Window
"The Windows on your probe system is too old. Please update to at least Windows Server 2008 or Windows Vista(we strongly recommend Windows Server 2008 R2 or Windows 7). (Performance Counter error 0xB0000005)"
We are getting this...
Tue, 10 Jun, 2025 at 10:52 PM
Hi Guys,
on my playground I use the preview version, now so 15.3.19.3881.
Since then I have - it seems - a problem with the WMI security center sensor.
On the machines concerned I have running Avast Antivirus. The sensor shows now a w...
Tue, 10 Jun, 2025 at 10:52 PM
Hi - I am trying to use PRTG to monitor my hp switches but would like to drill down into more detail, i.e. what types of traffic is flowing over each port? is this possible? At the moment I have the simple RMON sensors and traffic sensors f...
Tue, 10 Jun, 2025 at 10:52 PM
Hi All
I want to monitor a few Windows terminalservers for a (or multiple) Windows process (e.g. cmd.exe or dropbox.exe) which should NOT run (never)!. I could script something but maybe there is a solution with the available process sens...
Tue, 10 Jun, 2025 at 10:52 PM
I am trying to set up a sensor to give me the number of instances certain processes that are running. There are about 20 different versions of this process, but we want a single count. Is there a wildcard option?
For example, I have proce...
Tue, 10 Jun, 2025 at 10:52 PM
It appears the following error, whend adding a poweshell sensor:
The Sensor can not connect to the Device using Remote-PowerShell. Ensure that remote management is enabled on the Exchange Server and the user-name and password is correct. ...
Tue, 10 Jun, 2025 at 10:52 PM
Greetings!
Is there a way to have PRTG send an e-mail notification if a specific file ceases to have a constantly changing file size / modified timestamp?
We have a very large and complex ERP system with a multitude of components that c...
Tue, 10 Jun, 2025 at 10:52 PM
Is it possible to simulate a few servers using the Paessler Multi Server Simulator and run a java program on those servers? If yes, could I be given an example? If no, what else can i do?
Article Comments
Sorry that's not po...
Tue, 10 Jun, 2025 at 10:52 PM
We want to be able to notify groups of people based on the time of day, is it possible to configure emails to be sent to different people based on the time of day.
Article Comments
Hello Peter,
Yes, this is possible. Here'...
Tue, 10 Jun, 2025 at 10:52 PM
Several sensors get an alarm several times a day with this error. I see that others have had the same issue, but no solution is posted in the knowledge base. How can I get around this alarm? We have a network monitor running on a big screen...
Tue, 10 Jun, 2025 at 10:52 PM
Is it possible to run the prtg server on a Linux system. We don't have any windows systems in our network to run prtg.
Article Comments
Sorry, there is (and probably never will be) a native linux version of PRTG :(
Sep,...
Tue, 10 Jun, 2025 at 10:52 PM
My Amazon Cloud service instance runs in the new eu-central-1 region. Why can’t I select EU (Frankfurt) in the region settings of the Amazon CloudWatch sensor to monitor my AWS instances?
Article Comments
News about Region EU (F...
Tue, 10 Jun, 2025 at 10:52 PM
After the most recent round of Microsoft updates for Server 2003 (March 2012), the PRTG Core Server Service will not start by itself. Since it is Server 2003, we cannot configure it to start delayed (as per another KB article). Has anyone e...
Tue, 10 Jun, 2025 at 10:52 PM
Hi all,
in the map is it possible to have a graph representing the alarms count?
I'm interested to see in last 24H the trend of alarm counts.
Article Comments
You'll need a HTTP XML sensor for that:
Create a HTTP X...
Tue, 10 Jun, 2025 at 10:52 PM
I would like to supervise the availability of the sockets of a cisco 2950 switch on my network and i dont know which sensors to choose and how to proceed. thanks in advanced for helping me.
I've got the freeware version of PRTG
...
Tue, 10 Jun, 2025 at 10:52 PM
Does PRTG support sending SMS through cellular networks (say if we put a usb mobile broadband device on the server, could it send out SMS in the event that the exchange server or internet lines went down)?
Article Comments
Hi,
...
Tue, 10 Jun, 2025 at 10:52 PM
I'm using a filtered data table in one of my maps to show the status of all our SQL dumps. Each SQL dump is a custom EXE sensor. We have well over 50 SQL dumps. I want to show the status of every SQL dump in a filtered data table in a m...
Tue, 10 Jun, 2025 at 10:52 PM
Wenn man aber hier in der Knowledgebase NICHT eingeloggt ist und dann auf activity klickt und auf Seite 2 möchte, dann kommt die Fehlermeldung dass er die seite nicht finden kann (also https://kb.paessler.com/en/activity/2)
Ist man eingelog...
Tue, 10 Jun, 2025 at 10:52 PM
I have noticed a number of posts about this, however nothing really up-to-date.
What I am attempting to do is access the PRTG API from a client script (JavaScript) within a basic HTML5 website.
This is however hampered by HTTP access cont...
Tue, 10 Jun, 2025 at 10:52 PM
Hi,
I'm trying to query the PRTG API for historic data to put on an internal dashboard style website.
However, whenever I try to access the historic data via xml, my Chrome tells me:
Origin http://mywebsite is not allowed by Access-C...
Tue, 10 Jun, 2025 at 10:52 PM
Hello Dears,
How can I enable alarms based on latency (Alarms and not notifications)
as when latency increase to a certain threshold it will generate a red alarm like the one that's generated when a device drop.
Article Commen...
Tue, 10 Jun, 2025 at 10:52 PM
After checking to make sure PRTG would be compatible with Windows 10, I went ahead and upgraded to Windows 10. After, I noticed my PRTG services weren't running. I've reinstalled without luck and restored a previously backed up conf...
Tue, 10 Jun, 2025 at 10:52 PM
Hi all,
can I set in the gauge graphic the max limit?
As example: I'm using the gauge to show the ping in msec, I want to setup the gauge with a green area from 0 to 100, yellow area from 100 to 200, red area from 200 to 300.
Atm in...
Tue, 10 Jun, 2025 at 10:52 PM
I have a Dell PowerVault MD3600f that gets the proper sensors for disk 1 - 23, but disk 0 looks to have the table formatted incorrectly.
I have created a workaround with a custom sensor, but instead of taxing this server so much, I'...
Tue, 10 Jun, 2025 at 10:52 PM
When adding a Microsoft SQL v2 Sensor it states that .Net4.0 is needed on the machine that is running the PRGT Probe.
In the case of a default installation does this refer to the local probe where PRGT was installed? or does the Microsoft...
Tue, 10 Jun, 2025 at 10:52 PM
I would like to make a cisco switch 2950 superviseable
Article Comments
Hi,
could you please give us some more details of what you want to do exactly?
Thank you!
Sep, 2015 - Permalink
I think he meant "how to moni...
Tue, 10 Jun, 2025 at 10:52 PM
We have a couple of HP 4250 LaserJet printers installed in our network. But after we installed the PRTG software they all give randomly the 49.5001 or 49.4c01 error in the printer display. The only solutions is to reset the printers... Is i...
Tue, 10 Jun, 2025 at 10:52 PM
We currently have a prtg cluster consisting of one master node and one failover node located in two separate buildings. We also have several remote probes in other buildings.
The current setup is running on windows 7 64bit PCs.
What would...
Tue, 10 Jun, 2025 at 10:52 PM
Hello! I need help! We have Core Server x64 with about 20k sensors ( about 5k devices ) on 5 probes (1 local and 4 remote probes). It runs on virtual server extremly unstable and i think it's time to do sothing with this problem. I wan...
Tue, 10 Jun, 2025 at 10:52 PM
Unable to monitor ASR1001 CPU utilization. I was able to auto - discover 2900 ISRs and clone the CPU sensor to other 2900s but wont work for ASR1000. Does anyone know what the MIB is for cpu on asr1000
Article Comments
We found ...
Tue, 10 Jun, 2025 at 10:52 PM
When selecting view in my Device Tree with a Read Only account, the chosen view does not remain the default. This causes every subsequent reload of the page or refresh to revert the view to the default which is the smallest sensor size tha...
Tue, 10 Jun, 2025 at 10:52 PM
Hello,
I love the automation aspect of PRTG's sensors, however there are many occasions where I want to be notified of an issue without any automatic action being taken until later when I'm ready.
Simple example - I want to be a...
Tue, 10 Jun, 2025 at 10:51 PM
Wird der PRTG Server in einem Cluster betrieben, wie sieht das mit einer Virtuellen IP-Adresse usw... aus?
Article Comments
Hallo,
leider verstehe ich die Frage nicht ganz.
Wenn PRTG im Cluster Modus betrieben wird ist jede No...
Tue, 10 Jun, 2025 at 10:51 PM
It's great how you can over-ride the port name template under SNMP COMPATIBILITY OPTIONS. However, I would like one additional variable for the naming: "Device Name" and/or "IPv4 Address/DNS Name."
When you are ad...
Tue, 10 Jun, 2025 at 10:51 PM
I am trying do import MIB files from tplink switch:
http://www.tp-link.com.pl/resources/software/TL-SG2452_V1_MIB_140723.zip
I am using alpha and stable version of mib importer. I got information about missing modules and other errors th...
Tue, 10 Jun, 2025 at 10:51 PM
I am using PRTG to monitor our network to see if it is worth the investment in the full product. I like the information it can give on CPU usage and memory et cetera, but when it comes to switch's and SNMP monitors it doesn't seem t...
Tue, 10 Jun, 2025 at 10:51 PM
Hi,
One of the main tools that we need in our company is to generate bandwidth for specific amount of time to test link that was just created.
Currently we are using iperf with specific lines like
iperf -c 1.1.1.1 -b 10M -t 3600 -p 5999
...
Tue, 10 Jun, 2025 at 10:51 PM
I have tried all the methods that is mentioned in the related posts but not able to solve the issue can anyone please help me here.
Article Comments
Hi Guys,
I would appreciate if any one can help me here.
Regards,
Add
...
Tue, 10 Jun, 2025 at 10:51 PM
We are looking to monitor the VMFS datastores on an ESX 4.1 server. Just wondering the best way to go about this.
Article Comments
we are already working on it.
Dec, 2010 - Permalink
Do we have any idea when this may be...
Tue, 10 Jun, 2025 at 10:51 PM
I have followed all the steps mentioned here (https://www.paessler.com/manuals/prtg/remote_probe_setup) & here (https://www.paessler.com/manuals/prtg/remote_probe_quick_install), have even opened the port 23560 in my firewall for all in...
Tue, 10 Jun, 2025 at 10:51 PM
Hi all,
I have a string snmp sensor and I used a REGEX in order to "Extract a numeric value using a regular expression".
the value of the SNMP field may be:
a string with a number (to be extracted), or
empty
It works perfect, but ...
Tue, 10 Jun, 2025 at 10:51 PM
Does PRTG have an automatic method for making layer 2 network maps? I'm not a networking guy so I may be using the wrong terminology but what I'm looking for is a map/diagram that show the following:
Scenario
1 24 port switch
1 8...
Tue, 10 Jun, 2025 at 10:51 PM
I'm currently evaluating PRTG and I've never been a big fan of auto discovery. Is there a method to import devices via CSV? I wish to import as much information about each device as possible. With other products I have used the e...
Tue, 10 Jun, 2025 at 10:51 PM
¡Ha fallado el escaneo por objetos de monitorización disponibles!
Mensaje de error No such object (error SNMP # 222)
Tipo de sensor Biblioteca SNMP
Aparato FW CENTRAL (10.1.10.45)
----------------------- New Test -----------------------
...
Tue, 10 Jun, 2025 at 10:51 PM
We are trying to check the frequecy of critical and high alerts, hence we require the logs to check. Is there a way to pull only the critical and high alert logs of all the sensors that were up and down for 1 month in PRTG? Please advice
...
Tue, 10 Jun, 2025 at 10:51 PM
I'm looking for a way, custom sensor or not, to be able to monitor a list of windows services without having to have them all created as a separate sensor and then monitored. Would also need this to be able to restart services if they f...
Tue, 10 Jun, 2025 at 10:51 PM
Hi All,
PRTG is asking for proxy credentials even though it is disabled under core and probes settings.
This is happening with vmware virtual machine SOAP sensor and unable to connect at all.
Article Comments
Dear abhishekg ...
Tue, 10 Jun, 2025 at 10:51 PM
PRTG Probe Service and PRTG Core Server Service are running, still PRTG shows "Probe device disconnected". Web server is running, all else appears normal. Server is reachable by any means, no apparent errors found in System or App...
Tue, 10 Jun, 2025 at 10:51 PM
It is not a problem, as much as a question, Is Microsoft Edge a recommended browser? How do the different browsers rank now?
Article Comments
Hi Dave,
We still recommend to use Google Chrome for the best performance, but you c...
Tue, 10 Jun, 2025 at 10:51 PM
When using the SSH VMWare ESX(i) Disk Sensor, we get the following error
Device is not compatible (can not parse reply data). (code: PE094)
What could be wrong ? SSH is on on the ESXi host and we use correct credentials.
Best Regards
Da...
Tue, 10 Jun, 2025 at 10:51 PM
Now, I know it's usually that you want processes and the like to be up, which of course is no real problem setting up sensor for, but with our new PRTG installation the thought about an existing problem game up on out team, so I figured...
Tue, 10 Jun, 2025 at 10:51 PM
Sehr geehrte Damen und Herren,
ich habe Probleme mit folgenden Sensor. esxservervmsensor
Bei allen meinen Virtuellen Host habe ich die folgende Fehlermeldung:
The object has already been deleted or has not been completely created
Di...
Tue, 10 Jun, 2025 at 10:51 PM
so I was able to import the MIB however the defacto value for charting, alerting, etc is #/s...but I want just #...otherwise since this is a 60sec poll, I have to times the value by 60 and that well just skews things a bit...
if I need to...
Tue, 10 Jun, 2025 at 10:51 PM
Hello Experts,
I am stuck in a weird situation, Actually I am trying to configure PRTG's EXE/XML Advance sensor that runs a powershell script what my scripts does is that it takes values of a system and stops for a period lets say 5 m...
Tue, 10 Jun, 2025 at 10:51 PM
I want to generate a report of a sensor’s historical data and PRTG asks me if I want to include percentiles. Should I? Are they useful?
Article Comments
This article applies to PRTG Network Monitor 15 or later
The Value Percen...
Tue, 10 Jun, 2025 at 10:51 PM
Hi,
I have a probe running a handful of custom SSH scripts against a remote Tomato-based router. It opens a new SSH session for each script, at each sampling interval. The connection overhead is not insignificant (i.e. long execution ti...
Tue, 10 Jun, 2025 at 10:51 PM
Hi all,
I have a old prtg v8 server, Can i move it installation to a new prtg v15 server to replace it?
Thank a lot.
Article Comments
Dear GaryLeong
It is not directly possible to go from PRTG 8 to 15. A partial migration (l...
Tue, 10 Jun, 2025 at 10:51 PM
Using the new "SSL Certificate Sensor BETA" sensor in version 15.3.19.3972, we're having trouble replacing the superseded "HTTP SSL Certificate Expiry sensor". I'm assuming the problem is the format of the SNI, a...
Tue, 10 Jun, 2025 at 10:51 PM
Hey,
I'm running PRTG v15.3.19.3972 and got a problem with notifications filtering.
First I added some tags to notifications, after that I tried to filter these by the tag, but its not working. It shows an empty field like there are n...
Tue, 10 Jun, 2025 at 10:51 PM
Dear Paessler
I've add a remote sensor on a branch PC and I want this PC to collect all the branch data (SNMP, WMI..etc)
currently I see only sensors on the branch PC (health, CPU .. etc) I need to sense other devices like a network U...
Tue, 10 Jun, 2025 at 10:51 PM
Hi all,
I'm just about to build our PRTG infrastructure and want to ensure that I build it to be as "performant" as possible. So my question is...
Will the Core server perform better if the PRTG database is hosted on a separ...
Tue, 10 Jun, 2025 at 10:51 PM
Bom Dia
Gostaria de saber como ver se a alguém na minha rede sem permissão, e como ver se determinado IP esta usando muita banda da minha rede, e se a alguma maneira de impedi-los.
Tanslation
I'd like to know how I can find ro...
Tue, 10 Jun, 2025 at 10:51 PM
Is there anyway to filter the sensor list by Status?
I'd like to see all sensors with a particular tag then filter to just see the sensors with a status of Warning or Error.
Article Comments
Menu Sensors > By Status &...
Tue, 10 Jun, 2025 at 10:51 PM
Until now we used smtp Notification with our internal Exchange 2010 Cluster and anonymous access without any Problems.
Because we have to send Email-Notification to an external Domain now we have to change from anonymous to SMTP Authentic...
Tue, 10 Jun, 2025 at 10:51 PM
I am having an issue with our SNMP Sensors on one of our probes. They error with the message: "Could not create SNMP Session (-3000)"
I have attempted to test using the SNMP Testing tool and am able to successfully get the uptim...
Tue, 10 Jun, 2025 at 10:51 PM
some of the sensor are in unknown status. How to resolve the issue.
Article Comments
Is that still the case? This usually occurs after a restart or update; or when the graph cache has to be recalculated. Patience is key then :) ...
Tue, 10 Jun, 2025 at 10:51 PM
Hello
We have several NetFlow and sFlow probes. For some subnets PTR resolution initially did not work. We have resolved the DNS issues and now from inside the OS were able to resolve the ip-to-host. However, those same ip's were not ...
Tue, 10 Jun, 2025 at 10:51 PM
Hello,
We have several EC2 instances on AWS cloud and chosen PRTG to monitor whole AWS infrastructrue. Could someone share me a document to get started with ?
any leads ?
Tq
Article Comments
Have you tried the Amazon CloudWa...
Tue, 10 Jun, 2025 at 10:51 PM
Hi,
I've been using multiple AWS CloudWatch monitors for over a year. All have been working fine. A few days ago, all CloudWatch monitors started to fail, simultaneously. The error that PRTG returns varies depending on which AWS servi...
Tue, 10 Jun, 2025 at 10:51 PM
Error on enterprise console was "Not Connected (Error in content:)
Read other KB asking to start PRTG Core Server service.
But it keeps failing. Already set the service to "Automatic Start (Delayed) but still same issue
PRTG versi...
Tue, 10 Jun, 2025 at 10:51 PM
Hi there I am trying to create a group of sensors called workstations
What I would like these sensors to do is ping the workstation every hour or so, but if there is no response from the ping sensor not report it but pause the other sensors...
Tue, 10 Jun, 2025 at 10:51 PM
Is it possible to get a warning if someone connect an unknown device to my network.
PRTG know all my used IP on my network, and could maybe discover "news" on network ??
Thanks
Article Comments
Hello.
This is not ...
Tue, 10 Jun, 2025 at 10:50 PM
Hello,
I've installed PRTG and tried to monitor for some time, after several weeks I've got a messages from CISCO device that it's down. From Cisco syslog i saw that PRTG send too many packets to Cisco so, cisco activate self ...
Tue, 10 Jun, 2025 at 10:50 PM
Monitoring a Sonicwall NSA3500 via netflow5 sensor and my toplists look great, but my graphs are not reporting properly. For example if I add up 15mins of toplist traffic I have around 5GB of data transferred between IP's as I would ex...
Tue, 10 Jun, 2025 at 10:50 PM
I am trying to disable the down status for a specific sensor on a device, but even going by the steps on here https://helpdesk.paessler.com/en/support/solutions/articles/6683-how-can-i-disable-alerting-for-a-particular-channel-of-a-sensor a...
Tue, 10 Jun, 2025 at 10:50 PM
Hi @ all,
We currently use the sensor "free disk space" on around 50 different Windows Server. We now want to monitor and report the used disk space of the servers. How do we achieve that? We thought with a new custom WMI sens...
Tue, 10 Jun, 2025 at 10:50 PM
snmpsonicwallvpntrafficsensor collects the VPN information from my SonicWALL (including the name and subnet information) but all channels in the sensor are reporting no traffic.
Log shows
Property "identifyby": TPaeInternalList...
Tue, 10 Jun, 2025 at 10:50 PM
Hallo,
zu Beginn haben wir die Monitoringsoftware über den Administratoraccount eingerichtet. Nun haben wir den Benutzer ändern wollen. Hierfür haben wir einen neuen Benutzer angelegt und diesen zu der Gruppe der Administratoren hinzugefü...
Tue, 10 Jun, 2025 at 10:50 PM
I need to ping an IP outside of my company.
For HA i can acces it through 2 different gateways from 2 different ISP.
They are MPLS connections so im given an end here with an IP assigned by the owner of the remote device which i need ...
Tue, 10 Jun, 2025 at 10:50 PM
I made a custom SNMP delta sensor. Interval is set to 5 minutes. So far so good. But i don't want it calculated down to #/sec, but to #/min or #/hour. Simply adding multiplication partially works. But read value's are now to "h...
Tue, 10 Jun, 2025 at 10:50 PM
The subject line sums it up; does the API support changing, or adding, a device template to an existing device?
Article Comments
Hi there,
I'm afraid that it's not possible to assign devicetemplates to existing devices...
Tue, 10 Jun, 2025 at 10:50 PM
Hi all,
I has few sensors in a device, and it was running a day, When i clone the device, i found that the data history was missing,
How to clone the device and it will be contain a data history?
Thank a lot!!!!!
Article Comments ...
Tue, 10 Jun, 2025 at 10:50 PM
I have the necessity to be more efficient in my monitoring, power to use multiple dependencies and control of at least four monitorings that fail to determine an error in a sensor
They can develop this characteristic? for my it is very im...
Tue, 10 Jun, 2025 at 10:50 PM
I've read through the API information and the reports functionality, and I haven't been able to pull this data out of PRTG programatically.
For the API, I can't determine how to pull this data for more than 100 sensors, I have ...
Tue, 10 Jun, 2025 at 10:50 PM
Dear all
I always wondered why my ASA, which I monitor with a netflo9 sensor, has a lot of traffic from a fileserver to IP 192.88.99.1.
According to "google" its ipv6 traffic. But ipv6 is turned off and I dont see why my fileser...
Tue, 10 Jun, 2025 at 10:50 PM
Hello,
I would like to monitor my wan bandwidth - I.E: Network provider gives me 30Mbps download speed and 2Mbps upload, i would like to make sure this is the speed i get and to be notified when download speed falls under 10Mbps and upload ...
Tue, 10 Jun, 2025 at 10:50 PM
Hello,
this is part of my api call :
http://xxx.xxx.xxx.xxx/api/historicdata.xml?id=2024&avg=0&sdate=2015-09-01-00-00-00&edate=2015-09-01-23-59-59&username=username&password=password
This takes a few seconds to gen...
Tue, 10 Jun, 2025 at 10:50 PM
I have a custom sensor calling a batch that does:
echo %username%
In settings, security context is set to "Use Windows credentials of parent device".
The parent device windows account is set to: MyUser
I'm expecting to see...
Tue, 10 Jun, 2025 at 10:50 PM
Is it possible to trigger an auto-discovery of a device using templates from the API? The API docs don't seem to mention anything about this, but thought it may be a feature that is possible just undocumented?
Thanks,
Stuart.
...
Tue, 10 Jun, 2025 at 10:50 PM
Hi guys, i try to create amazon cloudwatch sensor by api request, but without success. I run this request
https://myhostname.com/api/duplicateobject.htm?id=1&targetid=2&name=AWS_SENSOR&instance=i-XXXXXX
and always get duplica...
Tue, 10 Jun, 2025 at 10:50 PM
I have few websites running in about 35 servers. I would like to monitor those websites. I can see that I can add a HHTP sensor to each of the device but I dont want to do that. Is there a way , I can directly monitor the websites without a...
Tue, 10 Jun, 2025 at 10:50 PM
Hi
I've installed a new sensor for a Windows 2008 R2 server.
The sensor is working fine and returning correct values, however the sensor also appears to be writing to the log every 5 minutes, for example with the disk space counter ...
Tue, 10 Jun, 2025 at 10:50 PM
When adding the CPU Load monitor some of our servers are having an additional CPU added. I've seen some other posts regarding this happening on 64bit servers with a high core count but this is happening on servers with just 2 cores.
...
Tue, 10 Jun, 2025 at 10:50 PM
