kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I've successfully added the Active Directory Replication sensor to my domain controllers. Two of them are reporting Time of the last sync attempt and last sync success different than the others, results are 1 hr for both. I have repli...
Tue, 10 Jun, 2025 at 4:04 PM
Since updating to the current Dell iDRAC firmware I cannot get the PRTG ipmi sensor to connect. My other tools that access IPMI on the servers are still working so I am guessing this is a compatibility issue with the utility used by prtg.
I...
Tue, 10 Jun, 2025 at 4:04 PM
Hi, i hope someone can help me... I'm working for now 2 weeks on a sensor, that shows me how old a backup is. The result from the PowerShell script is:
<prtg>
<result>
<channel>Bac...
Tue, 10 Jun, 2025 at 4:04 PM
I just came home fra Nutanix .NEXT conference in Copenhagen. I talked with some people who are using PRTG. All was disappointed we didn't see Paessler at .NEXT since you claim in the roadmap your planning sensors for Nutanix
Are you g...
Tue, 10 Jun, 2025 at 4:04 PM
Hi,
i would like to monitor the network type of our servers. All servers should have a "domain network" connection, but sometimes they start in "public" or "private" networks which leads to a couple of proble...
Tue, 10 Jun, 2025 at 4:04 PM
I created a custom SNMP sensor.
This OID only returns numerical values when the service associated with the OID is running. When the OID doesn't receive data from the poll, the sensor is marked as down. How do I just make this sensor ...
Tue, 10 Jun, 2025 at 4:04 PM
Hi,
Is it possible to change SNMP credentials settings in a device sensor such as community name, user name, password, SNMP version, authentication, encryption, IP address and etc. using API call?
Article Comments
Hi there,
...
Tue, 10 Jun, 2025 at 4:04 PM
Good morning all,
I appreciate this has been asked many many times, but I am really struggling to work through the excellent answers to find what it is I need to do. Essentially, we have a number of Custom REST sensors we'd like to de...
Tue, 10 Jun, 2025 at 4:04 PM
Hello!
What for Priority is in PRTG? I know we can change Sensor sizes inside a device, but there is a dedicated object in Map Designer which call Sunburst (Sized by Sensors and Priority)? What more Priority can change? Is it influince so...
Tue, 10 Jun, 2025 at 4:04 PM
Hello
I'm trying to get our Lenovo servers (thinkSystem and SystemX) into PRTG so i can be aware of hardware problems, and i'm not really getting anywhere - so need advice.
At present the servers feed into a XClarity IPMI manage...
Tue, 10 Jun, 2025 at 4:03 PM
I need to find all the probes that still have the default reconnect time of 300 seconds. Is there a way to see this without going to each probe?
Article Comments
Hi,
Unfortunately, there is no other way as to go to each probe ...
Tue, 10 Jun, 2025 at 4:03 PM
When I am designing a Map. How can I set automatically the external link of a sensor to its graph?
i.e. place automatically the text: "sensor.htm?id=9999&tabid=2" for every PC, I have hundreds of them.
where 9999 is the numb...
Tue, 10 Jun, 2025 at 4:03 PM
Is there any ETA you can give regarding implementation of 2FA?
2FA is a must have in todays IT Infrastructure and Security. I'm pretty sure that MOST of the users would love to see any solution here. Especialy for usage with the mobil...
Tue, 10 Jun, 2025 at 4:03 PM
I am on version 19.3.52.3502. I have created several maps and the fonts color is black. When I go to create a new map. In the properties windows on the right hand side I am using Device Tree View - Device Tree (S).
The font color is white....
Tue, 10 Jun, 2025 at 4:03 PM
Is there any way to set 95 percentile billing? Any tool or script which can run the 95 percentile billing every and sent usage?
It's so much time consuming to run for each port :)
Article Comments
Hello there,
Thank you fo...
Tue, 10 Jun, 2025 at 4:03 PM
Hi is there a feature where when you have custom scripts on the local probe, and wish them to copy to all the remote probes?
Article Comments
Hi,
Unfortunately we don't offer a feature wich copy a custom script to all remo...
Tue, 10 Jun, 2025 at 4:03 PM
Hi! We're having some network devices combined in group named "Network". Each one of this devices have a several sensors, including PING sensor. How can I configure all of my devices in this group so that this PING sensor was ...
Tue, 10 Jun, 2025 at 4:03 PM
Hello,
I was wondering, is it possible or how hard would it be to make something like - When I open an critical sensor (red error) and click right mouse button or where ever, and there would be an option to generate an e-mail about this e...
Tue, 10 Jun, 2025 at 4:03 PM
Hi All,
Is it possible to increase the thickness of the plot line on live graphs?
I have some of these on a monitoring wall but they are difficult to make out from a distance.
Many Thanks,
John
Article Comments
Hi,
Unf...
Tue, 10 Jun, 2025 at 4:03 PM
Hi there,
We've started to monitor our powershell - Scripts with the "HTTP Push Data Advanced" - Sensor.
As soon as the specific script has finished and all integrated checks are fine, it will send a get request to the speci...
Tue, 10 Jun, 2025 at 4:03 PM
Hi!
I want to build a map that monitors networks with a location based system.
To make this clear I want to start with a picture of our building. Then I want like 1 floor, 2 floor and so on. Then rooms and in the rooms I want to exactly s...
Tue, 10 Jun, 2025 at 4:03 PM
I've been working on trying to resolve a mutex timeout with a MSA 2040 SAN we've been monitoring. We had been successfully monitoring the SAN with the SSH sensors, but recently the sensors began to fail with mutex timeouts. I'...
Tue, 10 Jun, 2025 at 4:03 PM
Okay so I'm programming an internal program which uses the API to create Excel files, custom graphs, and other dataformats other than the built-in PDF format. I have read that you pipeline and restrict the amounts of API calls to a spec...
Tue, 10 Jun, 2025 at 4:03 PM
When running the auto-discovery on a stack of 6 Cisco 3750's, several of the active ports were not recognized or added to the list of sensors for that device. Rerunning auto-discovery did not add the switch ports either.
How can I co...
Tue, 10 Jun, 2025 at 4:03 PM
Hello,
Is there any option customisation options in PRTG that would let me add custom links, scripts or api calls to the node screens?
Lets say I am on the page of a Cisco switch, on the right hand side of the screen is a box with stat...
Tue, 10 Jun, 2025 at 4:03 PM
Hi,
We've added YouTube.com as a site to monitor using the full web sensor because we've had reports of buffering issues. Surprsingly the sensor is showing lots of brief downtime, and the odd bit of prolonged downtime, yet the sit...
Tue, 10 Jun, 2025 at 4:03 PM
Hi There,
Hoping someone can help out. I have an API where I wish to only pull the last array using slice and convert the attribute within the array from a string to integer using lookup. Below is the code:
{
"prtg": {
&...
Tue, 10 Jun, 2025 at 4:03 PM
Hello.
I use PRTG for monitoring my servers. I know PRTG is built around sensors, but I wonder if I can use PRTG for automating scripts? What i would like to accomplish, is to automate scripts (schedule) on some servers at a special time...
Tue, 10 Jun, 2025 at 4:03 PM
Hi,
i just had adain the situation, when selecting a group with several devices and a few sensors, that default sunburst is shown without paused devices, but without any filtering they should be shown.
I definitely selected "Sunbur...
Tue, 10 Jun, 2025 at 4:03 PM
Having an issue getting PRTG to see the script in /var/prtg/scripts/prtg.sh The scripts works if executed via putty over ssh, when adding the sensor it also connects, but the file is not listed in the selection drop like it would if it was ...
Tue, 10 Jun, 2025 at 4:03 PM
Since Years i´m missing this function for groups.
Working more ´n more in large enterprise environments it grows to a fundamentaly need to speed up usage of WebUI and Desktop.
When does it come?
Article Comments
Hello,
Thank...
Tue, 10 Jun, 2025 at 4:03 PM
I have (2) locations that I would like to monitor and wondering if the free PRTG solution offers a remote sensor option.
Thank you,
Article Comments
Hi,
Yes, PRTG offers a remote Sensor option. You find more information abou...
Tue, 10 Jun, 2025 at 4:03 PM
I´m missing exact PRTG version in overview of remote probes in "PRTG Status" overview.
To have a watch on it should avoid missmatching of core & probes, possible problems updating probes.
I think this should be not rocket scie...
Tue, 10 Jun, 2025 at 4:03 PM
hi dear
how can i separate V4 traffic and V6 in a SNMP traffic sensor?
kind regards
yalda
Article Comments
Hi there,
Unfortunately, that is not possible as every traffic is counted into the traffic counter. There is no way to ...
Tue, 10 Jun, 2025 at 4:03 PM
Is there a way to search for a string in a sensors name including any spaces, ie "1 GBit/s". If I search for that is includes anything with a "1" or "GBit/s".
Article Comments
Dear nocDan
As an al...
Tue, 10 Jun, 2025 at 4:03 PM
I hope this isn't too much of a daft question - I'm trying to monitor uptime of a western digital NAS, the only way I can think of to do this is will the custom exe/script sensor running on my core server, but I have no idea how to ...
Tue, 10 Jun, 2025 at 4:03 PM
We need to monitor a scheduled task created on a server can we do it by PRTG?
Article Comments
Daniel,
We cannot monitor the scheduled task itself natively. You might be best by creating a PowerShell script to poll for the da...
Tue, 10 Jun, 2025 at 4:03 PM
Hi All,
I'm having a strange issue.
I have managed to create a new object for my map that pulls the time from moment.js and displays it.
The reason I want to use this, is that I need to see several time zones and the only templates I ...
Tue, 10 Jun, 2025 at 4:03 PM
I'm interested in using your software in an industry that requires CFR 21 Part 11 compliance.
Article Comments
Hello,
PRTG does not officially comply to any standards or similar, sorry. In essence, there are no CFR stamps...
Tue, 10 Jun, 2025 at 4:03 PM
Hi,
I am exploring creating map. And for traffic light (status icon) , There is black panel with three dot (red, yellow and green indicating status of the sensor)
I want to change that black panel into gray color. But still cannot find a ...
Tue, 10 Jun, 2025 at 4:03 PM
Is is possible to just display on the map those sensors that generates the most alerts?
Article Comments
Hi Ariel,
Thank you for your message.
I'm afraid there is no map object available that does that.
Kind regards,...
Tue, 10 Jun, 2025 at 4:03 PM
I am looking for any guidance on how i can use Execute HTTP Action to send a message with variables to a Cisco Webex Teams room/user. I have tested the API access with Postman successfully but am not terribly familiar with how it translates...
Tue, 10 Jun, 2025 at 4:03 PM
Hello everyone,
I need to monitor 2 Linux servers based in our client's infrastructure. I would like to avoid having to create a VPN between our two networks.
I've read about PRTG Mini Probes and they fully fullfill my needs. Howe...
Tue, 10 Jun, 2025 at 4:03 PM
Hello,
I have a custom sensor that works with a powershell script to get some data using PowerCLI. To connect and use PowerCLI, I need to specify the user and password. I'd like to pull this information using the VMware/Xenserver Cred...
Tue, 10 Jun, 2025 at 4:03 PM
Hello,
Is there a way to limit the amount of API calls a certain user can issue?
I saw an earlier post (https://helpdesk.paessler.com/en/support/solutions/articles/20153-is-there-a-limit-number-of-request-per-seconds-for-prtg-api) but it ...
Tue, 10 Jun, 2025 at 4:03 PM
Hello,
would you please add an attribute to sensor, which would give PRTG alerting info what map should be included in case the particular sensor triggers alert?
We have many sensors and maps and currently there seems to be no way how t...
Tue, 10 Jun, 2025 at 4:03 PM
One of our Windows machines (and only one) in our VMWare system runs out of time sync (>2min) each day and I want to monitor that.
I set up the WMI UTC-Time Sensor for this machine and it reports me a time difference of 13sek. Quite co...
Tue, 10 Jun, 2025 at 4:03 PM
I want to export all sensors that are in a certain schedule. Ex. Daily at 4am.
Article Comments
Hi there,
What do you expect the export should look like? PRTG's API can provide you with live data, did you already check tha...
Tue, 10 Jun, 2025 at 4:03 PM
Hello.
How to execute a script on a remote probe when the sensor is triggered?
This functionality is already implemented?
Article Comments
Hi BabychAV,
You can execute programs (scripts) through the Execute Program option wi...
Tue, 10 Jun, 2025 at 4:02 PM
Hi !
I would like to know if it's possible to test if a folder is absent (green state) or not (red state) ?
Thanks for your help
Article Comments
Yes, you can use our Folder Sensor for this.
Kind Regards,
Timo Damb...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
I'm using GLPI (http://glpi-project.org/) in order to manage my IT service. It's very useful because there is a ticket manager, contracts manager, inventory manager, etc.
Problem, is it possible to send tickets from PRTG...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
i'm using PRTG to monitor my network and devices. I want to know how can i redirect a device for an external web page browser. for exemple i have many devices; if One of device has a problem i will able to click on the device an...
Tue, 10 Jun, 2025 at 4:02 PM
So, I have had little to no trouble working with the API and it's very straight-forward. However, I recently tried to download historic graphs and I get a 404-not found error upon calling the API. I've double checked the url 3-4 tim...
Tue, 10 Jun, 2025 at 4:02 PM
I have Acer PCs in my office which answer to pings also when "sleeping".
I made a check for WMI-SMART-status of the harddisk and the check goes to error because WMI is not answering from the sleeping PC.
How can I set another...
Tue, 10 Jun, 2025 at 4:02 PM
We currently have the PRTG Desktop installed on two RDS Servers (load balanced) and when we logout of the environment and back in we lose all the account settings for PRTG Desktop and have to start again and enter the server and login detai...
Tue, 10 Jun, 2025 at 4:02 PM
I'm trying to return object details for a specific device based upon probe name and ip. Supposedly there's an undocumented open filter thing that I can use, but I have no idea what the format would be. Any clues?
Article Com...
Tue, 10 Jun, 2025 at 4:02 PM
It's important to check the usage of CPU, Memory, DISK in server monitoring.
Generally, I check the usage with the percent of used.
In Windows OS, the usage is displayed percent of used on 'Performance' tap in Task Manager....
Tue, 10 Jun, 2025 at 4:02 PM
Hello
I have PING sensors on some printers, but when ever someone turns them off they turn red and shows "Down" and i dont want to react to a printer that is turned off. So is there a way i can make it only turn yellow "war...
Tue, 10 Jun, 2025 at 4:02 PM
Hi All,
I wonder if any of you can share from their experience with a situation similar to the following:
We have a windows server with PRTG network monitor, which monitors mostly windows servers. We are currently using "advanced e...
Tue, 10 Jun, 2025 at 4:02 PM
hello. i can not monitor bgp peer status with custom oid 1.3.6.1.2.1.15.3.1.2
prtg says No such object (SNMP error # 223)
please help me
Article Comments
Hello,
thank you very much for your KB-Post. Can you try to use our ...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
I have several sensors that are dependent on multiple other sensors.
For example, only when sensor A and B are active then sensor C should be active, can sensor C have both A and B as dependency?
Article Comments
Hi,...
Tue, 10 Jun, 2025 at 4:02 PM
Is it possible to use PRTG with Cisco switches to read out the MAC table including the port to which the device is connected?
How high do you estimate the load on the switches and PRTG?
Many thanks for your support
LG Pit
Articl...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
Is there a possibility to stop notifications for specificic times? Sort of like a schedule but then without pausing the sensors.
Article Comments
Hi,
You can create a schedule, to stop notification for specific times....
Tue, 10 Jun, 2025 at 4:02 PM
I am trying to monitor a directory for files older than 1 day. That worked fine until I was told that there will usually be a couple of files that are older than a day.
Is it possible to monitor a folder and alert if there are more than ...
Tue, 10 Jun, 2025 at 4:02 PM
What is javascripts files in PRTG used for?
Does PRTG uses node.js by handling .js(javascripts) files ?
Article Comments
PRTG is still using jQuery in the backend, which will be replaced in a revamped interface we're curre...
Tue, 10 Jun, 2025 at 4:02 PM
Wir haben ein Verständnisproblem in PRTG beim Umgang mit XML/EXE Sensoren und die verwendeten Zugangsdaten, um diese Skripte bzw. EXE-Programme auszuführen.
Ich uss dazu sagen, dass unser Probe Server nicht teil der Domäne ist, aber Zugri...
Tue, 10 Jun, 2025 at 4:02 PM
Hi,
i want to monitor temperature with a Geist Watchdog 15.
I've set up SNMP on the device and looked at the OIDLIB of the device.
When setting it up in PRTG the default sensor "SNMP up time" works fine.
But when i try to...
Tue, 10 Jun, 2025 at 4:02 PM
Hi all,
I've run into a problem with a map.
What I'm trying to accomplish is a map with all of my nodes on it.
In our current situation, probe disconnections happen quite often, yet I do not want them to show up on my map instantl...
Tue, 10 Jun, 2025 at 4:02 PM
I know PRTG GUI don't use Apache or IIS as Web-Server.
What kind of web-server does PRTG use ?
Article Comments
Hello,
PRTG is using an own proprietary webserver.
Kind Regards,
Timo Dambach
Paessler Tech Support
...
Tue, 10 Jun, 2025 at 4:02 PM
I want to be able to ping external IP addresses of our hosted devices and servers from the PRTG hosted probe to determine if the device is up and to also use say the HTTP or RDP probe to make sure services are available. However i need to a...
Tue, 10 Jun, 2025 at 4:02 PM
Hi,
I try to use a regex for Acronis Backup email.
In all email subject we have the same sentence :
SHP - RÉSUMÉ DES ALERTES ACTIVÉ Thu Oct 24 06:00:59 2019 (Critique : 0, Erreur : 0, Avertissement : 0) Device: Plan:
The idea, det...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
I have a question related to Sensor Channel settings.
For a cisco switch , I have a Sensor channel called "System Health Power Supplies" the shows 4 lines as there should be 4 power supplies. 2 of them are missing and I...
Tue, 10 Jun, 2025 at 4:02 PM
Does anyone have experience measuring home electricity usage, perhaps using CT Clamps ? Searching amazon, it appears the EHEM1-LV Home Electricity Monitor units might be interesting: https://www.amazon.com/Eyedro-EHEM1-Home-Electricity-Mon...
Tue, 10 Jun, 2025 at 4:02 PM
I recently migrated our PRTG installation to a new server, with a new server name. I was able to move everything across, and all my sensors came across, overall a success.
One area I did notice is that the URL's in the notification li...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
we have a problem with the certificate sensor. We get the message "Unable to check revokation status", but there are several URLs in the certificate for CRLs and there is also an internet connection. Unfortunately, the fi...
Tue, 10 Jun, 2025 at 4:02 PM
I am trying to filter certain subnets from a VPN tunnel that terminated on an interface and would need to filter traffic based on the destination IP address. How can I accomplish it using the fields/filters with NetFlow.
Article Com...
Tue, 10 Jun, 2025 at 4:02 PM
I am checking JSON, I have a set values get returned:
{
"status": {
"code": 200,
"text": "OK"
},
"response": {
"authenticated": false,
...
Tue, 10 Jun, 2025 at 4:02 PM
I'm trying to monitor the health of our Storage Spaces Direct virtual disks using PowerShell with XML/Custom Advanced senor, with something like this:
$GVD = Get-VirtualDisk | Where-Object HealthStatus -ne Healthy
Write-Host "&l...
Tue, 10 Jun, 2025 at 4:02 PM
I'd like to graph historical data from MQTT end points.
I'm currently using the HTTP Push beta, but MQTT would work better for my environment. That means having to historical servers or abandoning PRTG..
Can you create a sensor tha...
Tue, 10 Jun, 2025 at 4:02 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
Discovery is a very powerful tool, however it needs to work on...
Tue, 10 Jun, 2025 at 4:02 PM
I am calling a notification template for testing with the newest version of PRTG (now is November 2019). A batch file is called which looks like this:
rem Call_telegram_sender.bat
c:\somepath\send_to_telegram.exe %1
The notification &q...
Tue, 10 Jun, 2025 at 4:02 PM
1. please let us know how to monitor whether the ISP links are giving us the Exact bandwidth or not.
>2. How to set a threshold in case if the bandwidth gets reduced also want the PRTG to trigger us with alert mail in case the bandwidt...
Tue, 10 Jun, 2025 at 4:02 PM
Hello,
Since we update our PRTG on premise server, we have 8 new errors PE043.
Can you help us?
Article Comments
Hello,
This error is related to the Network card change, probably by changing the server. "Network card no...
Tue, 10 Jun, 2025 at 4:02 PM
I use the PRTG for iOS app on my iPhone / iPad / iPod. Can I use the PRTG for iOS app also on my Apple Watch?
Article Comments
This article applies to PRTG for iOS 15.3.12 and PRTG Network Monitor 14.4.13 or later
PRTG on Your...
Tue, 10 Jun, 2025 at 4:02 PM
Dear all,
I have a small question cause I haven't found anyhting in the KB about it.
I am using the PRTG Desktop Client and I am connected to our Core which works well.
But for some demonstartion I would like to connect to the Pae...
Tue, 10 Jun, 2025 at 4:02 PM
Hallo Paessler Team,
in der neuen Version ist der benannte Sensor ja enthalten.
Funktional muss ich auch erstmal sagen, dass dieser gut aussieht.
Ich habe dann entsprechend im Test System ein Template für unserer Server erstellen wollen...
Tue, 10 Jun, 2025 at 4:02 PM
User Story
As a PRTG User, I want to create native maps from libaries without having to employ custom sensors.
Details of User Story
The general structure of our device tree is and needs to be based first upon the geographic locations...
Tue, 10 Jun, 2025 at 4:02 PM
Can I install a Windows CA service to the same server PRTG is installed on?
Will there be any conficts doing this?
Article Comments
Hello there,
Technically yes, but I would not recommend it, I mean a user asked once in the ...
Tue, 10 Jun, 2025 at 4:01 PM
I'm attempting to create a sensor to report critical replication health of a VM from a probe device. I found another user who posted what seemed to be a fantastic solution, I'll include it below, however upon activating the sensor I...
Tue, 10 Jun, 2025 at 4:01 PM
Hi,
currently I am using this one to check single scheduled tasks:
- ScheduledTask2XML (http://prtgtoolsfamily.com/downloads/download/dl1a50eb4e-a286-495f-9a00-ab57c6ad2f5b)
Now I'm running into the problem, that I have several se...
Tue, 10 Jun, 2025 at 4:01 PM
Hi everyone,
I would like to monitor equipments over a LAN thanks to an RPI.
I do not want to use any Linux based OS because of limited probe features and I heard it is possible to install either WoA (Windows on ARM) or Windows IoT (co...
Tue, 10 Jun, 2025 at 4:01 PM
Read your blog about the new Battery Sensor and had to have a bit of a laugh to myself about the section 'Add and Configure the Sensor' which said "Nothing could be easier" because every server we try it on gives us the er...
Tue, 10 Jun, 2025 at 4:01 PM
Hi All,
I am asking this after I tried to figure the answer out from the documentation but couldn't.
I am using python sensors, and as they are coded now, if something goes wrong, they print text based error messages and do not outp...
Tue, 10 Jun, 2025 at 4:01 PM
Hello,
I woul like to create a REST custom sensor to monitor a JSON return value.
The return value looks like this:
[
{
"playerId": "5ba4c379fd806fb029653ba2",
"status": "UP",
"details"...
Tue, 10 Jun, 2025 at 4:01 PM
Is there a way to add email contact for alerting without actually creating a user? Basically we want to add email contacts and have then get notify without being a user in PRTG. So when we create alert trigger on a group we can select the c...
Tue, 10 Jun, 2025 at 4:01 PM
Hi,
We want to make disappear the outgoing message queues to be sure that our app wouldn't use them anymore. If Outgoing Message Queues are temporary, when does it disappear from compmgmt.msc when they are suspended and cleared, and the...
Tue, 10 Jun, 2025 at 4:01 PM
Hallo, die ICON Software GmbH
hat PRTG-Sensoren für die Simatic S7-Serie der SPSn von Siemens entwickelt. Es werden alle Modelle der Reihe S7-300, S7-400, S7-1200 und S7-1500 unterstützt. Hierbei ist kein Eingriff auf der SPS-Seite erforde...
Tue, 10 Jun, 2025 at 4:01 PM
Hello,
Since about 10 days the PDF reporting has returned an error.
Beforehand and for almost a year the PDF reporting via mail worked flawlessly.
The error message I can see on the PRTG is:
"Executable for PDF rendering (C:\Prog...
Tue, 10 Jun, 2025 at 4:01 PM
ICON Software GmbH has developed PRTG sensors for the Simatic S7 series of SPSs from Siemens. All models of the S7-300, S7-400 and S7-1200 series are supported. No intervention on the PLC side is required here. By means of the SPS-Profiler ...
Tue, 10 Jun, 2025 at 4:01 PM
Hi, maybe this is a simple question,
can you please help me to reply the answer i have from my team,
we are monitoring Windows services, and we have a live graph with
(%)Downtime
(MByte)Working Set
(MByte)Private Bytes
(%)CPU Usage (ave...
Tue, 10 Jun, 2025 at 4:01 PM
