kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Dear Support Team,
How can i bulk change "Connection Status Handling" in sensors setting?
Currently i have to change this option sensor by sensor.
If its not possible, is there any solution to find out which sensors use which opti...
Tue, 10 Jun, 2025 at 12:22 PM
Hi,
If I have a core server with multiple probe's reporting back to this core server, will each probe have a unique probe ID number associated with it? Also, does each sensor within each probe have it's own unique sensor ID value...
Tue, 10 Jun, 2025 at 12:22 PM
Dear Support Team,
I have for example 4 sensors that are related together. It means they belong to 4 devices that have a hierarchical relationship in network. It means if sensor 1 of device 1 goes over its threshold, it cause to sensor 1 of...
Tue, 10 Jun, 2025 at 12:22 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to monitor a Docker Swarm ea...
Tue, 10 Jun, 2025 at 12:21 PM
Since upgrade of vcenter, our vmware sensors are in down status due to invalid credentials. I've alr
Hello,
My issue started with sensors monitoring datastores from vSphere. The sensor type is VMware Datastore (SOAP) and it has a user that gets the data from vSphere. After an upgrade on the version of vSphere all the sensors getting data f...
Tue, 10 Jun, 2025 at 12:21 PM
Have several workstations both Win7 and Win10 being monitored by PRTG on Domain Network. Most running WebRoot or Security Essentials or Defender. I am unable to add the same WMI Security Center sensor to one particular Win 10 Box running We...
Tue, 10 Jun, 2025 at 12:21 PM
Hello,
We are facing a very serious problem since upgrade to version 18.4.45.1898 x64.
Every day, more and more WMI sensors on different remote probes stop working with "Connection could not be established (code: PE015)" or "...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
i need to check a folder if we have correct amount of backup files stored: There must NOT be fewer than N *.bak files that are older than one day .
can i archive this with PRTG ?
Article Comments
Have a look at one of the f...
Tue, 10 Jun, 2025 at 12:21 PM
Quick overview on out notification stratergy:
We set a notification (state trigger) on the root and made all devices/sensors inherent to this.
However now, we want for CPU, MEM, Windows Updates, no notifications during nights.
You can s...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
We've moved to a new method of using SSL, where we use a wildcard cert on a reverse proxy.
Where we had a URL which was basically the hostname, e.g. myjirainstance.mycompany.com to ip 192.168.0.50,
We now use that hostname for S...
Tue, 10 Jun, 2025 at 12:21 PM
Hallo,
beim Einrichten von wmi-Sensoren habe ich folgendes beobachtet:
Ich möchte auf einigen Servern wmi-Netzwerkadapter-Sensoren anlegen. Ich bekomme aber folgende Fehlermeldung:
TOctCheckWMIMetaBase.MetaWork: timeout while waiting in...
Tue, 10 Jun, 2025 at 12:21 PM
Hi there, is it possible to create a custom sensor with a mathematical calculation? I want to check the difference between three sensors and have the result in percent.
Article Comments
That would be the Sensor Factory Sensor :)...
Tue, 10 Jun, 2025 at 12:21 PM
I'm using "HTTP Push Data Advanced" to create four channels. I've parsed the IP of the remote machine into four values. I'm pushing the via four times (with different channels).
curl "http://blah-blah-blah.com:5...
Tue, 10 Jun, 2025 at 12:21 PM
I'd like to be able to easily identify PRTG channels that do not have limits set.
Ideally, I'd like to use a list of sensors and, per sensor, find any channel that does not have a limit set.
The idea is to check a large number o...
Tue, 10 Jun, 2025 at 12:21 PM
Hellooo Paessler!
I have been given the bleak job of auditing all of our pause and parent dependencies across our hosts. Alongside this i would like to know sensors/channels with limits and without and ideally what these limits are... i ...
Tue, 10 Jun, 2025 at 12:21 PM
Hello,
I have PRTG installed across 10 sites. The Core is installed in on site and the other 9 sites have remote probes.
If one of the 9 sites loses internet connection is it possible to still receive alerts from a remote probe though
a S...
Tue, 10 Jun, 2025 at 12:21 PM
If you want to change (Multi edit) WMI Free disk sensor you only can choose the % settings and not change to MB settings.
Article Comments
Could you provide me with some screenshots what setting you mean?
PRTG Scheduler |
...
Tue, 10 Jun, 2025 at 12:21 PM
I want to buy a USB gyro and connect it to the machine. When a sensor is down, the gyroscope will light up. How do I do that?
Article Comments
A gyroscope that will light up? Do you mean a beacon? A gyroscope doesn't produce...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
we use a custom map object, that display all error Sensors of a device in failure state in one row:
<!--Data Tables (Custom): Geräte im Status FEHLER-->
<div class="map_object map_table customalarms_biggerfont" ...
Tue, 10 Jun, 2025 at 12:21 PM
Dear Support Team
Is it possible to specify a time of a date in scheduled report? If so, please let me know the correct pattern.
Thanks a lot
Article Comments
Hossien,
Currently no, the reports run overnight on the day you spe...
Tue, 10 Jun, 2025 at 12:21 PM
Hello,
I want to ask if there is any way to do a sensor what check if any mailbox got as example 95% of its size used and then change the status to red and show the mailbox with the "problem".
I dont want to do a single Sensor...
Tue, 10 Jun, 2025 at 12:21 PM
Report help, example: when I take a report from the month of May until December, it gives me the total average, as in the same report I get an average month-to-month
Article Comments
Daniel,
So you're looking to get month-...
Tue, 10 Jun, 2025 at 12:21 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want set the GPS location of a device (or de...
Tue, 10 Jun, 2025 at 12:21 PM
Hello,
I have a powershell script that looks for some information regarding the state of the backup, how many hours since the last backup.
I tested the script by running it through the PRTG server and it returns the information with the...
Tue, 10 Jun, 2025 at 12:21 PM
Guten Tag,
ich möchte nur für bestimmte Sensortypen E-Mail Benachrichtigungen erhalten und habe gelesen das dies mit Bibliotheken möglich ist.
Nun habe ich eine Bibliothek erstellen wollen, in der ich nur die Ping- und Dienste-Sensore...
Tue, 10 Jun, 2025 at 12:21 PM
I love having the option to have public maps and love having the map rotation feature. However it would be really helpful for a NOC screen to be able to use both of these together. What I mean is there a way for a public user to view map ...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
I have recently finished another PRTG installation for a customer of our company. However, when I want to display the map I made for their servers it keeps saying map refresh failed. It looks like when their's 2 people watching at...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
I have just clean installed an HP ML350p G8 with Server 2016 Hyper-V, which was previously 2008 R2. I was using PRTG to monitor the HP hardware when running 2008 R2 as HP Insight Management Agents and WBEM were installed.
I have jus...
Tue, 10 Jun, 2025 at 12:21 PM
Hello
Normally I add a device with device name and a DNS Name do the PRTG System.
After auto-discovery with a template the device name will be renamed to DNS Name(Device Name).
Following sensors will be added with the template to the devi...
Tue, 10 Jun, 2025 at 12:21 PM
Hello Guys,
I was wondering if anyone could help me out with the following issue.
I am adding my nx-os switch with vrf-lite config to prtg. The main goal is to read the ospf if states.
Now i have added to PRTG the following mibs:
CISCO...
Tue, 10 Jun, 2025 at 12:21 PM
I need to monitor a directory for incoming files which are received as yyyy-mm-dd-hh-mm-ss.txt, each filename received is unique. Once they are processed the extension changes to .txt.OK, usually within a few seconds. Would like to set the ...
Tue, 10 Jun, 2025 at 12:21 PM
Good afternoon, I would like a possible help with report, we have more than 1000 links in our monitoria and would like to take the report only of the links that had problems have some automated form of it?
Article Comments
Hello...
Tue, 10 Jun, 2025 at 12:21 PM
Hello, I have a question regarding the following section:
https://www.paessler.com/manuals/prtg/detailed_system_requirements
Hardware Requirements for PRTG Server and Remote Probes
Hardware requirements for PRTG Core Service and Probe...
Tue, 10 Jun, 2025 at 12:21 PM
Hello,
I'm very new to PRTG, having switched over from SpiceWorks Network Monitor, and I was wondering if there was a way to create a visual representation of sensor data for a switch (i.e. either text showing total In/Out, bar graph)...
Tue, 10 Jun, 2025 at 12:21 PM
Hello ALL,
I have a Windows DHCP Server.
Is it possible to monitor a Scope usage declared in this DHCP Server?
Regards
Article Comments
Your title made me expect something completely different.
Do I understand it right that ...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
Is there a way to create a map object that shows a count of how many times a sensor have gone down per 24h and 7 days per device?
The graphs doesn't really provide a good aggregated view of this.
It could resemble a 2-light traf...
Tue, 10 Jun, 2025 at 12:21 PM
Is there a feature to allow PRTG Maps to dynamically scale to the browser size. I've been looking and can't seem to find anything like that. Maps are all a specific width x height. I don't mind the scrolling up and down but I...
Tue, 10 Jun, 2025 at 12:21 PM
The IMAP sensor has a problem. When trying to log in, the following response is returned by the server:
Command requires 2 parameters
I've discovered the problem is because of the password. It needs to be surrounded by quotes (bec...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
Is there any way to retrieve a list of remote probes within PRTG? If possible including their GID, Name and IP?
Regards,
Stephan
Article Comments
Within PRTG, you can retrieve a list via http://<your-prtg>/status....
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
I am reviewing the notification settings on our version 9 installation.
Some devices and sensors have been set to "use only triggers defined for this object" and I was wondering if there is any way I can reset the notifica...
Tue, 10 Jun, 2025 at 12:21 PM
I'm using syslog and SNMP trap receivers on all devices. When looking at the syslog messages or trap messages, some columns are too norrow and the wider columns do not have any content. I want to adjust the look of this table.
A...
Tue, 10 Jun, 2025 at 12:21 PM
Hi,
What outbound ports needs to be open in order for SNS messages to publish?
Cheers
Article Comments
Hi Dylan,
Thank you for your message. For SNS you should be fine with enabling port 443 outbound.
I hope this helps. ...
Tue, 10 Jun, 2025 at 12:21 PM
We have some devices for which the manufacturer has advised too many snmp queries will cause a crash.
To help prevent this, is there any way for PRTG to limit the number of snmp queries per second sent to a particular device? For example,...
Tue, 10 Jun, 2025 at 12:20 PM
Hi,
I've just performed a fresh install of PRTG onto a Windows Sever 2012 R2 VM.
The network discovery has just finished however I have just noticed that the VM is attempting to connect to IP address 216.58.204.36 (appears to be a...
Tue, 10 Jun, 2025 at 12:20 PM
Hi to all!
How i can use the paepy package found on the sensor_exaple.py in my python script to return a json?, or i can build a XML on my script and send that to the PRTG.
I use lxml package to build the XML so i need to know if it'...
Tue, 10 Jun, 2025 at 12:20 PM
Support:
Is there a sensor / method of tracking the amount of CPU consumed by a particular Microsoft SQL instance. Currently, I've got my SQL instances configured to use all CPUs. I've also got a couple SQL instance configured t...
Tue, 10 Jun, 2025 at 12:20 PM
Is there a way to create a report that will give you just the peak outgoing bandwidth per day on an interface for say a month?
Article Comments
Hello there,
Unfortunately this is not possible. PRTG only shows the maximum val...
Tue, 10 Jun, 2025 at 12:20 PM
i'm trying to monitor PAN OS bgp peer status , in PAN OS you have a limited SNMP MIB's that does not have any OID for bgp protocol or bgp peering status .
and my goal is to create a monitor through the custom REST sensor because P...
Tue, 10 Jun, 2025 at 12:20 PM
I'm attempting to clone a device from one group into a new group using the API. I have confirmed that my parameters look correct, but I'm getting the following response:
error: missing schema
code: -1002
It comes along with a re...
Tue, 10 Jun, 2025 at 12:20 PM
Hello i am trying to monitor some service for our company but when i try to add wmi service sensor i get this error wmi works fine to all type of sensor cpu,memory etc
Article Comments
Is the user account you're using within...
Tue, 10 Jun, 2025 at 12:20 PM
All of my probe names begin with the same string so in the web UI with that column truncated, all three appears the same so I can't tell what probe I am working with. Either make the column expandable or at least make it so hovering the...
Tue, 10 Jun, 2025 at 12:20 PM
Hi, I'm working with a local probe and a remote probe, which were both in the same domain.
However, I have recently removed the local probe from the domain. (not sure if that matters though)
Basically today all of my sensors went er...
Tue, 10 Jun, 2025 at 12:20 PM
I can not acknowledge any alarms and it is really getting irritating so without that ability I end up just ignoring alarms which is not good...
Article Comments
Hello there,
Please let us know how you are trying to acknowled...
Tue, 10 Jun, 2025 at 12:20 PM
Hi,
I am integrating prtg with salesforce. I installed localhost prtg. i am trying
"http://127.0.0.1/api/table.xml?content=sensors&columns=sensor&username=prtgadmin&password=xxxx"
and
"http://127.0.0.1//api/get...
Tue, 10 Jun, 2025 at 12:20 PM
I think Im asking a stupid questions here so please forgive me in advance...
I want to monitor SNMP sensors on my remote cluster probe, do I have to port forward the SNMP port for all the devices I want to monitor remotely so that they ar...
Tue, 10 Jun, 2025 at 12:20 PM
Hi there,
I had an expectation that the 'scan now' button should be a way to force the scanning of the particular sensor, however it only seems to refresh the PRTG page.
I am using the ssh monitors such as SSH disk free and SSH ...
Tue, 10 Jun, 2025 at 12:20 PM
I have an exe sensor that is returning extra data on the status line. When I run the script from the PRTG server's command line I get the expected result:
1566:2018/12/19_14-05-24
https://i.imgur.com/oe4vWw1.png
However what is b...
Tue, 10 Jun, 2025 at 12:20 PM
Is it possible to synthesize a transaction in an ERP system with PRTG?
For example: You have an ERP like SAP, PeopleSoft, MS Dynamics, etc with a web-based front-end. I want to be able to perform a transaction by getting PRTG to log in, g...
Tue, 10 Jun, 2025 at 12:20 PM
I'm trying to get the Downtime time of a sensor via API.
table.xml gives me the downtime, but does not support sdate and edate.
historicdata.xml support sdate and edate, but doesn't give me the downtime
So how do I do it?
...
Tue, 10 Jun, 2025 at 12:20 PM
Unable to add Win API sensor. Error : "Login Failure: The specified network name is no longer availa
I am trying to monitor multiple event ids on a Windows Server client. When I try to add the Win API sensor, there is an error : "Login Failure: The specified network name is no longer available (code:PE029)".
However when I use ...
Tue, 10 Jun, 2025 at 12:20 PM
Hi,
Enabling/disabling the Amazon Simple Notification Service for notifications at the the root level has caused the core server to crash for up to 45 minutes causing all monitoring to be lost. This was not a one off occurrence. Any sug...
Tue, 10 Jun, 2025 at 12:20 PM
Hi All,
Wonder if anyone who is good with powershell help.
I have written a very basic backup check script that i thought was working great. However it seems to give me false positive and i think i know why. However when i make the cha...
Tue, 10 Jun, 2025 at 12:20 PM
We have some Moxa Insutrial Switches which I monitor with the snmptrafficsensor.
Usualy the Traffic on this Switches is very low, just some kbit's
But once a day I have a peak of 2 billions (10^12) in under one minute
where could be t...
Tue, 10 Jun, 2025 at 12:20 PM
It seems when I lose connectivity to a remote probe, the system immediately alerts me... I can't find where to relax these restrictions.
I'd like to be able to wait a configurable amount of time before a disconnected remote probe ...
Tue, 10 Jun, 2025 at 12:20 PM
How do I set an on-call and escalation calendar?
During business hours, all techs should get alarms. After hours, only the on-call tech should get alarms. If they don't acknowledge the alarm within 10 minutes, it should go to all tech...
Tue, 10 Jun, 2025 at 12:20 PM
Scenario: We have a rotating on-call schedule, tech 1 has week 1, tech 2 week 2, etc between 4 techs.
Alarms, alerts, emergencies, and down status's need to be sent to that week on-call's inbox and a central email all the techs che...
Tue, 10 Jun, 2025 at 12:20 PM
I've seen a couple posts that come close to what we're looking for but here's the scenario:
Whenever there is an alert or alarm triggered, an email is sent to a specific technician's inbox.
Given certain situations, this c...
Tue, 10 Jun, 2025 at 12:20 PM
I recently used this documentation to move my PRTG Data folder to a NAS mounted at Z:\PRTG https://https://helpdesk.paessler.com/en/support/solutions/articles/76000045250
When I set my configuration locations (In the Admin Tool under the ...
Tue, 10 Jun, 2025 at 12:20 PM
Hi there,
I'm using Powershell Active Directoty sensor https://helpdesk.paessler.com/en/support/solutions/articles/57603-is-it-possible-to-monitor-active-directory-user-account-status for tracking locked out users. The script logs the...
Tue, 10 Jun, 2025 at 12:20 PM
I added a VMware host to PRTG monitoring and this ambiguous result appeared under the warning status:
Sensor hostname [Hardware Status]
Warning. 61 elements return a warning state: System Board 1 Power Optimized 0 --- 0.7.1.117; Add-in ...
Tue, 10 Jun, 2025 at 12:20 PM
Hello dears;
Today I've just updated my windows server 2012 R2 and after that I got the error 0xc0000225. I've tested these commands below, but nothing happened:
bootrec /fixboot
bootrec /fixmbr
bootrec /rebuildbcd
I don'...
Tue, 10 Jun, 2025 at 12:20 PM
Dear Support
I hope you all will be fine. Well my question is that I am having a huge network with 5 x printers and 40 x machines including the SANs and servers. I want to add all the devices on a map automatically which clearly shows the n...
Tue, 10 Jun, 2025 at 12:20 PM
i needed export of information of ticketing to xml or cvs file
Article Comments
You can use the following query, but you won't be able to read edits, only the first message of the ticket entered upon creation:
<your-pr...
Tue, 10 Jun, 2025 at 12:20 PM
How To monitor Toner Used Printer in PRTG????
Please Help me!!!!
Article Comments
Your printer needs to support SNMP; then you can use the SNMP Printer Sensor, which is pretty generic and works for most printer models.
PRTG ...
Tue, 10 Jun, 2025 at 12:20 PM
Good day!
If I understand correctly, in PRTG I can create a status element on the map for a single sensor, for a device or for a group.
If I create an element for one sensor, when it changes it will become a different color.
If I create...
Tue, 10 Jun, 2025 at 12:20 PM
Hello
We are trying to get an EXE/Script Advanced Sensor to work.
The script is a Windows Batch Script (cmd) and works if executed on the server itself without any problem.
If setup as sensor on PRTG (3 params as string value) we get ...
Tue, 10 Jun, 2025 at 12:20 PM
Hello,
I would like to watch a directory on a network access (example : SRV-AD/PUBLIC/), by looking at on PRTG and at the forum, I notice that I have no answer.
Will a probe be planned for this case? Is there a script capable of doing ...
Tue, 10 Jun, 2025 at 12:20 PM
Microsoft has removed SNMP from windows 10 and Windows server. What do we have to do to continue using PRTG?
Article Comments
Hi Darwin,
You should be able to install it via
Control Panel Programs and Features Turn Windows...
Tue, 10 Jun, 2025 at 12:20 PM
I have a postfix server, that I have a script placed on that shows status for queues.
I have created a user on the machine for use for PRTG, this user can run the check_command without using passwords (sudoers).
If I log in to the server vi...
Tue, 10 Jun, 2025 at 12:20 PM
I am trying to monitor traffic to a specific server but the sensor does not show any traffic. I have tried the following channel filters (and a few others) without success:
#2001:Server
(DestinationIP[192.168.1.1]) OR (SourceIP[192.168.1....
Tue, 10 Jun, 2025 at 12:20 PM
Hi guys,
My server time/date forwarded to 2022 accidentally,
and when I chane It to now , Prtg data dont change from 2022 to now,
Can you guide me?
My All reports on Prtg start from 2022 and I cant access to previous data.
Thank in advance ...
Tue, 10 Jun, 2025 at 12:19 PM
Is ist possible to monitor a EMC-Storage System (VNX and VNXe)?
Yes it is, in a couple of hours I wrote some useful PowerShell-Scripts to monitor the following for the VNX:
Disk Space
Disk Status
Flushed MBs
and for the VNXe-System:
Bat...
Tue, 10 Jun, 2025 at 12:19 PM
I have a FortiGate firewall whose MIB includes an SSL Tunnel Table (that lists all active tunnels and includes usernames, uptime, IP address, bytes transferred, etc. for each tunnel. I would like to display a table on a map that shows this...
Tue, 10 Jun, 2025 at 12:19 PM
hello i have a Nexus 7000 switches added on PRTG, when i added Cisco health sensor it did not find nothing about:
SFP Detail Diagnostics Information Tx , Rx Power data .
i find CISCO-ENTITY-SENSOR-MIB but nothing detail how to build cu...
Tue, 10 Jun, 2025 at 12:19 PM
Hello, I have set up SysLog to receive messages from my Cisco router using the default configuration, and I can see the messages in the Overview tab. Apparently my router crashed on 31 December at 4:00 pm, and I am looking for the Messages ...
Tue, 10 Jun, 2025 at 12:19 PM
Can't add Dell PowerEdge Physical Disk Sensor on a PowerEdge T630.
Attempting to use iDrac method. HealthSensor works fine. Have used Physical Disk sensor on several other Dells with no issue. iDrac firmware is updated to the lates...
Tue, 10 Jun, 2025 at 12:19 PM
a question ive always wondered- when needing to reboot a server (server running prtg server + probe), what is the, i always first stop the probe and server core, via the prtg admin app. However, which is the recommenced order?
Should ...
Tue, 10 Jun, 2025 at 12:19 PM
Email notifications are not working. I receive messages Status of sending E-mail: DNS Server: 8.8.8.8 E-Mail: "xxxxxxxx@gmail.com". No MX records for the domain gmail.com.
I use google translator haha.
Article Comments
...
Tue, 10 Jun, 2025 at 12:19 PM
Hello,
I have installed the trial version with test-key in our environment.
Everything is great so far.
However, I do not find some sensors.
For example "SNMP Disk Free Sensor".
I can find it on your the homepage.
If I want to ...
Tue, 10 Jun, 2025 at 12:19 PM
Ive noticed that Paused sensors in Business Process sensor shows error, so if i define a device as object in Business Process sensor and it has even one sensors in pause state - it immediately shows error.
How can I fix the problem ? Is i...
Tue, 10 Jun, 2025 at 12:19 PM
I'm seeing an increasing amount of traffic from our PRTG server to Level3 Communications Inc IP addresses as of November last year; I'm assuming for the moment that this is part of what appears to be a relatively recent working rela...
Tue, 10 Jun, 2025 at 12:19 PM
We have an active/active pair of servers on site that we currently monitor. During the working day I am happy to receive an alert if there is a problem with either.
Outside of working hours I only want to receive an alert if both servers ...
Tue, 10 Jun, 2025 at 12:19 PM
Hi there and best wishes for 2019,
Assuming the feature is net yet available in PRTG I would like to propose an additional channel setting for sensors, that if a sensor reports for a configurable time period a threshold state it's act...
Tue, 10 Jun, 2025 at 12:19 PM
I would like to use auto-discovery to find new items in our network, and I would like to do an initial scan of everything, just to make sure we have not missed some server or switch, etc.
The problem is, I do not want hundreds of Emails a...
Tue, 10 Jun, 2025 at 12:19 PM
Suddenly the probe health of my PRTG system is showing down. The other two system health and core health are up. I have seen this question here like twice but no answer, Please help. I sent screenshots and logs to support@paessler.com
...
Tue, 10 Jun, 2025 at 12:19 PM
My PRTG server's internet connection tends to be unstable and when it goes offline for a few minutes this triggers plenty of sensor alerts. Is it possible to configure notification triggers as follows:
if Sensor1 (HTTP, google.com) ha...
Tue, 10 Jun, 2025 at 12:19 PM
I'm trying to monitor all configured VPN connections in our Barracuda CloudGen Firewall. There are +100 of them, so it would be nice if things run as automatically as possible. Ideally would be, of course, a periodically scan of all con...
Tue, 10 Jun, 2025 at 12:19 PM
I'm getting a malformed XML data on powershell.
This is literally all the powershell script is.
"<prtg>"
"<result>"
"<channel>dats</channel>"
"<value>1...
Tue, 10 Jun, 2025 at 12:19 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to define the behaviour of a...
Tue, 10 Jun, 2025 at 12:19 PM
I created an sql query that works on my server when using SQL management studio.
Easy query that returns % free space in the LOG db:
#select
#
#( (SUM( size)/128.0 - sum(CAST(FILEPROPERTY(name,'SpaceUsed') AS INT))/128.0)/(sum(s...
Tue, 10 Jun, 2025 at 12:19 PM
