kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi PRTG support team,
we created several sensors with the folowing kb article:
Is it possible to test a WSDL or SOAP service with PRTG?
The sensors work send a SOAP request every five minutes and they work fine. But several times a...
Tue, 10 Jun, 2025 at 9:56 PM
Hi,
I've recently installed PRTG Network Monitor and setup several Enterprise SNMP Sensors which uses SNMP GET and they work as expected. Also setup the SNMP Trap Receiver sensor and the traps are shown by PRTG Network Monitor.
Can...
Tue, 10 Jun, 2025 at 9:56 PM
Dears,
I use netflow to monitor my network. And I want to report about top talker and top connection. By default the result is resume of toptalker on each 15 minutes. How can I have the result of 1 day or 1 week?
Thank you very much!
...
Tue, 10 Jun, 2025 at 9:56 PM
Hi,
I would like to create an event log sensor that works in exactly the same way as the standard WMI event log sensor, but for Applications and Services Logs (specifically, Microsoft, Windows, AppLocker, EXE and DLL).
Could anyone poin...
Tue, 10 Jun, 2025 at 9:56 PM
I want to monitor the current and last RMAN backup status on an Oracle Database. How can I do it?
Article Comments
I resolve this using Oracle SQL v2 sensor and Custom Lookups according to this manual on Paessler KB:
I create...
Tue, 10 Jun, 2025 at 9:56 PM
Hi, I want to create an autodiscovery template that allow me to discover just the switch interfaces that contains a particolar description decided by me.
For example all the interfaces that contains the description "UPLINK TO" or ...
Tue, 10 Jun, 2025 at 9:56 PM
Hello,
i get timeouts after the login logline. no other errors. AccessKey is ok, allow ip is listed. everything seems to be ok because the log states that iam connected. the Probe is behind a NAT with a fritz.box 6490. ip is static.
02....
Tue, 10 Jun, 2025 at 9:56 PM
Hi there. I'm a new user so please forgive me if my terminology/understanding is incorrect.
I've setup a Netflow sensor for my Cisco router and am capturing all of the data I expected (LAN to LAN traffic, as well as LAN to WAN tra...
Tue, 10 Jun, 2025 at 9:56 PM
Hello,
The server where PRTG was installed crashed.
I am reinstalling the app.
The last backup is <root version="13" oct="PRTG Network Monitor 16.1.21.1924 x64"
The latest version I installed is <root vers...
Tue, 10 Jun, 2025 at 9:56 PM
PRTG Core Server Service in my server cannot start with this error:
The PRTG Core Server Service started and then stopped.some services stop automatically if they are not in use by other services or programs.
Article Comments
...
Tue, 10 Jun, 2025 at 9:56 PM
Hi,
I want to monitor application/service inside my tomcat.
Where I can get the reference to do this ?
Thanks.
Article Comments
This might be the right direction :)
Nov, 2016 - Permalink
Tue, 10 Jun, 2025 at 9:56 PM
Please explain step by step for me.
Thanks
Article Comments
You can't configure PRTG via command line. Only via PRTG Administration Tool, or Webinterface / Enterprise Console.
Nov, 2016 - Permalink
Tue, 10 Jun, 2025 at 9:56 PM
We would like to transfer a configuraiton file from <PRTG server 1> to <PRTG server 2>. Could you please let us know how to export configuraiton file from <PRTG server 1> then import that file into <PRTG server 2> ? ...
Tue, 10 Jun, 2025 at 9:56 PM
We have map with network topology but is there any chance to attach traffic sensor data as small graph-only objekt and lock it (attach) to link between 2 devices ?
The plan is the graph will move during object move in map designer.
ie: ...
Tue, 10 Jun, 2025 at 9:56 PM
When I set up our MS SQL v2 sensor, all I get in the Data Processing "drop-down" is "Just execute the query"; there are no other select-able options.
I'm sure I must be missing something simple - any suggestions?
...
Tue, 10 Jun, 2025 at 9:55 PM
Hello, how can I tell when my Cisco switch/router fails over to redundant power supply using a PRTG sensor ?
Thank you kindly.
Article Comments
Hello there,
thank you for your KB-Post.
The standard Cisco System Health senso...
Tue, 10 Jun, 2025 at 9:55 PM
Hello ,
I use to PRTG SQL sensor.But the sensor usually warnig or timeout message.What is the best practice of time out duration?
Thank you,
Esra
Article Comments
Hello Esra,
please open a ticket and send us more informa...
Tue, 10 Jun, 2025 at 9:55 PM
I attempted to update our prtg install with the latest update. I spun for 2 hours before I stopped it. I got into the system and could not recover anything. I ran the update directly on the machine. Still no joy.
By the third day I s...
Tue, 10 Jun, 2025 at 9:55 PM
Hi
One of mine REmote proble, keep crash.
I could provide you with the systems log
The PRTG Probe Service service terminated unexpectedly. It has done this 7 time(s).
Faulting application name: PRTG Probe.exe, version: 16.4.27.6846, ...
Tue, 10 Jun, 2025 at 9:55 PM
Hi all
when i will see historic graph, i have just Data but no image.
i try with other computeur and browser
see screenshoot.
http://hpics.li/84b4d73
regards
Article Comments
Hi there,
Please check that you have entered ...
Tue, 10 Jun, 2025 at 9:55 PM
I recently added the UCS Health Sensor for each of our two UCS C-series servers, one is a C240M3 the other a C220M4, both running v2.03i which is the latest UCS firmware, and the sensor seems to be reversing the reported Power Supply status...
Tue, 10 Jun, 2025 at 9:55 PM
Could you please let me know that Why "Server (IPv4 address or DNS name):" and "Probe Access Key:" option under "Connection to PRTG Core Server" are unchangeable? Please refer to an attached file.
Please expl...
Tue, 10 Jun, 2025 at 9:55 PM
Is there any possibility to size the logfile? My HDD space for logging is overflowing. It would be great to limit them by size or by the age.
Article Comments
Nice nickname! ;) There actually is, simply navigate to <your-prt...
Tue, 10 Jun, 2025 at 9:55 PM
There are two different servers PRTG, how to combine in one, preserving maps and sensors
Article Comments
Hi there,
Unfortunately, this is not possible at the moment and will most likely not be possible in future.
Nov, 2016...
Tue, 10 Jun, 2025 at 9:55 PM
We have multiple device in PRTG that we want to remove. As they are numerous, wondered if there is a script or powershell script that can be run to remove these devices automatically. Many Thanks
Article Comments
Hi there,
Th...
Tue, 10 Jun, 2025 at 9:55 PM
Hello,
When it is selected a Map as a main screen (homepage) doing in the main Page "Home" -> " "Maps desginer by me" " , this screen NEVER refresh automatically!!!. Does is a normal operation in PRTG?
...
Tue, 10 Jun, 2025 at 9:55 PM
Are there sensors available for the IBM System I/iSeries?
Article Comments
Currently, we only have sensors for IBM System X available.
Nov, 2016 - Permalink
Tue, 10 Jun, 2025 at 9:55 PM
PRTG version is 16.3.27.6636+ [Preview]
I'm trying to create "factory" sensor with the folowing simple formula
1:Bitrate(123439,0) #2:Errors(123531,0)
And getting this:
Error in channel list: Line 2, Channel #1:Bitrate(...
Tue, 10 Jun, 2025 at 9:55 PM
Hi
I'm running PRTG 15.1.13.1382. And have a question on how to order channels on stacked graphs.
I have setup a custom Exe/Advanced sensor with a couple of channels.
As an example:
<?xml version="1.0" encoding="U...
Tue, 10 Jun, 2025 at 9:55 PM
Hi,
I have the message "Timeout caused by wait for mutex. Consider distributing your VMware sensors across several probes! PE121"
I read the topic "30643-how-can-i-increase-the-connection-limit-on-vmware-systems-pe121"...
Tue, 10 Jun, 2025 at 9:55 PM
I migrated a XenServer pool from 6.5 to 7.0 and now the XenServer sensors do not work. I tried re-adding them and they still do not function. It gives host not found at uuid (UUID). Any idea when Xenserver 7.0 will be supported?
Art...
Tue, 10 Jun, 2025 at 9:55 PM
Hello paessler,
is it possible to freeze a sensor with status "error", until a user oder admin confirm this status?
Thanks Peter
Article Comments
Dear Peter,
Thank you for your kb-post.
Please refer to this art...
Tue, 10 Jun, 2025 at 9:55 PM
I have created a device template based on the existing device created by Auto-Discovery. As I want to have the basic monitoring sensors on my device, I just created the template with Ping, SNMP Disk Free, SNMP CPU Load and SNMP Memory senso...
Tue, 10 Jun, 2025 at 9:55 PM
Wir haben miniprobe auf einem Ubuntu 14.04 LTS Server installiert.
Die Installation ("python setup.py install") lief ohne Fehlermeldungen durch, jedoch startet kein Dialog zur Angabe der benötigten Parameter, d.h. es wird auch kei...
Tue, 10 Jun, 2025 at 9:55 PM
Is there a way for PRTG to log/monitor (ie Syslog) of users logins and logouts on a AD server?
Article Comments
Hello ipalleman,
You can monitor the syslog messages by using the Syslog Reveiver Sensor. If you configure the AD ...
Tue, 10 Jun, 2025 at 9:55 PM
Hello, we are on a decision point as to which monitoring platform we are about to deploy. The final decision is either PRTG or PandoraFMS.
PandoraFMS
PRO: It is free
PRO: It supports AIX 5.x, and possibly higher as well
CON: It is pro-act...
Tue, 10 Jun, 2025 at 9:55 PM
HI, I am trying to monitor physical drives on a new HP ML110 G9 (WS2012 R2 Essentials). Two drives are connected to a B140i controller as a mirrored pair.
Ideally, I would have liked to run ESXi (v6, HP version U2, free) but this does no...
Tue, 10 Jun, 2025 at 9:55 PM
Dears,
By default, PRTG monitor and display all data pass an interface. But I want to display traffic of certain ranges IP ( such as: traffic of only ranges 210.211.0.0/16, 115.110.0.0/16). Can PRTG do that?
Thank you very much
Arti...
Tue, 10 Jun, 2025 at 9:55 PM
hi , i want to have a view in my graphs to see both inbound and outbound value of how much is the max and min value m currently i can see the max,min value for the inbound traffic i wonder to know what should i do to have a view for the bot...
Tue, 10 Jun, 2025 at 9:55 PM
I'm working on a separate web interface that integrates with the PRTG API which I run on my local device. My goal is to collect data from the PRTG API, then load it into a database which can be accessed by a separate panel. My question ...
Tue, 10 Jun, 2025 at 9:55 PM
Hi,
I create new EXE/Script advanced sensor
PS script (ok):
# XML Output for PRTG
Write-Host "<prtg>"
Write-Host "<result>"
"<channel>Sessions</channel>"
...
Tue, 10 Jun, 2025 at 9:55 PM
Hello,
I`m a beginner with PRTG and i`m trying to count the pages of a printer. I know that i have to work with SNMP and OID.
I have treid the program Getif. But i cannot find anything where i can count the pages.
Also i cannot find th...
Tue, 10 Jun, 2025 at 9:55 PM
Hello, I am running a trial version of PRTG on my NAS, which runs Windows Storage Server2012 (Seagate). As such it works great in conjunction with my little ESX-farm: 2 ESX HyperVisors, connected to said NAS, on which all VMs are stored (iS...
Tue, 10 Jun, 2025 at 9:54 PM
I using netflow 9 to track internet data usage for my company. PRTG gives us a lot of data but it is based on how much data is used in a particular time frame (15 mins). I would like a report the gives me the total amount of data used in ...
Tue, 10 Jun, 2025 at 9:54 PM
Hi, one of our security scans is showing that the chargen service is running on our clustered PRTG Core Servers as described here http://www.tenable.com/plugins/index.php?view=single&id=10043. Our recommended course of action is to dis...
Tue, 10 Jun, 2025 at 9:54 PM
Hello All,
PRTG has a working email before however just yesterday Email notification no longer push forward.
Error seen is
Stat Disconnected
Stat Disconnected
Error Sending "email" : Connection failed (XXXXXXXXX)
however ...
Tue, 10 Jun, 2025 at 9:54 PM
The current "Folder" sensor will tell you the newest and older file in the folder, but no details about when the folder was modified.
I wish to use this to monitor a program that writes things to a temp folder, then passes them ...
Tue, 10 Jun, 2025 at 9:54 PM
we have a lot of sensors, usually the coloms are
Sensor:Status: Message: Graph: etc...
now are the first 3 colom's 70% of the table with
the Sensor name colom (in our case) is full and no means to scale the tables.
Making the colo...
Tue, 10 Jun, 2025 at 9:54 PM
A while ago we updated to version 14.3.11.2750 and 3 probe devices appeared at the bottom of the device list in the webinterface. I can not delete these devices, and they don't seem to be any real devices and don't get any data (gre...
Tue, 10 Jun, 2025 at 9:54 PM
What are the outbound firewall rules needed to allow a PRTG core system to send support tickets and bundles back to Paessler?
Article Comments
Hello Mike,
thank you for your KB-Post.
Please refer to the following KB article:...
Tue, 10 Jun, 2025 at 9:54 PM
Hello,
I'm trying to monitor events from the Failovercluster-manager
Picture: https://i0.wp.com/workinghardinit.files.wordpress.com/2012/06/image10.png
Does someone know how to display the last error message in PRTG ? I tried to g...
Tue, 10 Jun, 2025 at 9:54 PM
So this is going to sound backward from how the round-trip IMAP/POP3 sensors are typically used...but here is what I want to do:
We have internal Exchange servers that do not have IMAP or POP3 enabled. We have no need to enable those ser...
Tue, 10 Jun, 2025 at 9:54 PM
Hello,
How can I show a single flow of a NetFlow Sensor?
Thank You,
Patrick
Article Comments
Hi Patrick,
You could enable "Log Stream Data to Disk" in the sensor's "Settings" tab, which will write ...
Tue, 10 Jun, 2025 at 9:54 PM
I need customize PRTG report, file <Table only> on following link webroot\reporttemplates\details to display sensor ID in the table:
Now:
Probe, Group, Device: Local probe > CHANNELS_UTILIZATION > Device ID
Need:
Probe, Grou...
Tue, 10 Jun, 2025 at 9:54 PM
I use PRTG to monitor a network of about 30 devices and I'm interested in monitoring the routing tables of a few of them. As far I am concerned there is no out of the box sensor provided by PRTG to monitor the entire routing table. Beca...
Tue, 10 Jun, 2025 at 9:54 PM
I want to group some MapObjects like devices and sensors with the predefined object like the white rectangle with green or red border. If I do so, the connectors between the devices are not visible. Sending the rectangle to the background s...
Tue, 10 Jun, 2025 at 9:54 PM
I can't find sensor type of "Citrix XenServer Virtual Machine" by Auto discovery
Article Comments
Dear ethanchan,
Thank you for your kb-post.
Is the virtual machine you like to monitor running on Citrix XenServ...
Tue, 10 Jun, 2025 at 9:54 PM
Hi,
if I add a syslog receiver sensor, so it works without problems.
After the restart I get an error:
Could not open port 514 (code: PE245)(Could not bind socket. Address and port are already in use.)
if I add a sensor again, it wor...
Tue, 10 Jun, 2025 at 9:54 PM
We want to configure one time maintenance window for situations like ISP scheduled maintenance, patch installations etc. Is there a way to get this done in PRTG v12?
I'm not talking about recurring schedules I just need to stop alerts...
Tue, 10 Jun, 2025 at 9:54 PM
I am intermittently receiving WMI access is denied on Pagefile Usage, App Pool, and Windows IIS sensors. It consistently happens from 11PM until 11:15PM EST and also will randomly happen at other times, I haven't found a specific root ...
Tue, 10 Jun, 2025 at 9:54 PM
How to remove traffic graph bottom left(right) info
hi all ,
I have a traffic graph which is using "30 days (Large Fonts)" this template
and I want to remove the bottom left display info "PRTG version" and bottom right...
Tue, 10 Jun, 2025 at 9:54 PM
hi all ,
I have a traffic graph which is using "30 days (Large Fonts)" this template
and I want to remove the bottom left display info "PRTG version" and bottom right display info "time & id", as in red cir...
Tue, 10 Jun, 2025 at 9:54 PM
to restart the server didn't help. apart to rebuild a server and to move the PRTG data, any other idea to fix the issue?
the server is very slow as well now.
Article Comments
Hello Alexandre,
I just sent you an email askin...
Tue, 10 Jun, 2025 at 9:54 PM
Hi everyone,
I have an WMI error code in our PRTG environment and I can't find a real solution on the web.
The Message shows:
"80041064: The user specified a username/password/authority on a local connection. The user must u...
Tue, 10 Jun, 2025 at 9:54 PM
As the subject says, my PRTG Probe Services crash multiple times a day with the following message in the Event Log
Faulting application name: PRTG Probe.exe, version: 16.4.27.6985, time stamp: 0x58205a26
Faulting module name: unknown, ver...
Tue, 10 Jun, 2025 at 9:54 PM
Is there a way to force CSVExport to continue to the next Sensor ID in the list or finish running without waiting for keyboard intervention? I have a daily bat file for extracting all of the ping sensor data but some days we need to pause o...
Tue, 10 Jun, 2025 at 9:54 PM
Hi
I have only just installed PRTG this morning and am currently setting up various sensors, so far I am very impressed with ease of use.
I am stuck on trying to add any SNMP HP ProLiant test, it throws up an error message stating
No...
Tue, 10 Jun, 2025 at 9:54 PM
I already adding gigamon device using local probe and choose netflow v9 sensor. It is the channel automatically appear when I adding netflow v9 sensor?
Article Comments
Dear rajaserai1,
Thank you for your knowledge base post. ...
Tue, 10 Jun, 2025 at 9:54 PM
trying to do an equation to determine if a node's traffic is below the avg of the other pool members traffic...here is the formula so far
channel(2075,1)/((channel(2075,1)+channel(2099,1)+channel(2107,1)+channel(4692,1)+channel(2121,1...
Tue, 10 Jun, 2025 at 9:54 PM
Content in a monitored web page has changed. We reacted to the change.
Now we want to know if the page content changes again. But the sensor keeps alerting to a change, when it hasn't changed (lately).
How do we reset this sensor's ...
Tue, 10 Jun, 2025 at 9:54 PM
Hello,
I have to follow some naming convention for devices/sensors, but I would really need to describe the devices in some notes/description or comments. Is it possible somewhere?
Thank you.
Article Comments
Dear MrInfro, ...
Tue, 10 Jun, 2025 at 9:54 PM
Hi all,
I have several sensors running that checks when a SSL certificate expires.
I get the following error;
Warning by lookup value 'No' in Root Authority Trusted - Warning by lookup value 'Unable to check revocation statu...
Tue, 10 Jun, 2025 at 9:53 PM
Hi ,
I have use sflow to monitor my device, and found two things:
1.I cannot get bandwidth if the traffic is thought GRE tunnel.
2.The bandwidth information seem not inaccurate, I have compare with device interface and another flow col...
Tue, 10 Jun, 2025 at 9:53 PM
Dear Paessler
I have several hosts monitored, every host is in status GOOD (green).
Sometimes the sensor returns a number like 349, others 404.
I don't find anything that explain what this number means.
Thank you
Article Com...
Tue, 10 Jun, 2025 at 9:53 PM
hi! i created lookup file for my prtg ms sql sensor, but prtg system can't find my file in the list, i tried to load lookups, then restart the prtg service but always the same problem.
here is my lookup file:
<?xml version="...
Tue, 10 Jun, 2025 at 9:53 PM
Hi,
Microsoft have recently started issuing a preview of next months 'quality rollup' in their windows updates. https://blogs.technet.microsoft.com/windowsitpro/2016/10/07/more-on-windows-7-and-windows-8-1-servicing-changes/ Many ...
Tue, 10 Jun, 2025 at 9:53 PM
I'm creating some maps.
I have a layout of a site, with a number of devices around the site in the correct position. However its quite a large site, and when there is a fault the only way you can see this is by looking carefully and s...
Tue, 10 Jun, 2025 at 9:53 PM
Currently we have quite a few maps set up.
Right now there is still a clear view of the maps, but I am certain that that will change in the near future.
I would like to avoid the interface from becoming a mess.
Therefore I am wonderin...
Tue, 10 Jun, 2025 at 9:53 PM
Hello
I did setup PRTG Network monitor but I decided to uninstall it.
The uninstall operation has been performed from Windows uninstall program control panel
Since uninstall has been completed I'm still receiving notifications from this...
Tue, 10 Jun, 2025 at 9:53 PM
Hi,
We have a webap where we would like to use PRTG to monitor if login is still possible.
Is it possible to send a POST request and then check for the presence of "Set-Cookie: LtpaToken2" in the returning headers? Like with...
Tue, 10 Jun, 2025 at 9:53 PM
Hello
I have a website that I want to monitor the login process, to see if authentication is unsuccessful. However I am unsure of how to get this working.
I have selected an advanced HTTP sensor, but do I need to tell PRTG where the lo...
Tue, 10 Jun, 2025 at 9:53 PM
Good Day,
I have a service that is monitoring the Working Set however I would like it to put the sensor into a red state if the working set memory creeps above a certain point.
Any help would be appreciated.
Thanks
Daniel
Ar...
Tue, 10 Jun, 2025 at 9:53 PM
I prepared several sensors using powershell and I would like to add description or link to the external procedure/documentation for Helpdesk. It will be used by administrators and help them to quickly perform the steps described in checking...
Tue, 10 Jun, 2025 at 9:53 PM
Hi Team,
I'm going to be upgrading/replacing my secondary core server from a 2008 R2 box to a 2012 R2 in the near future.
What is the best way to go about doing this ?
Should I copy across the content within the program files folder ...
Tue, 10 Jun, 2025 at 9:53 PM
I recently migrated my PRTG server and followed all the migration steps (IP address was changed) now the enterprise console connects but trying to access via web browser i get "Not Found" right after login.
Article Comment...
Tue, 10 Jun, 2025 at 9:53 PM
I would like to have a live graph with only the x and y axis and no text on the top of the graph. Is that possible? I have tried to create my own graph, but I can only remove the whole text and not only the top text.
Article Comment...
Tue, 10 Jun, 2025 at 9:53 PM
Hi,
Is it possible to create an even based script?
I mean, if sensor for Linux disk space is down, PRTG will run a custom script on the server.
Thank you
Article Comments
Notifications are always executed on the PRTG server ...
Tue, 10 Jun, 2025 at 9:53 PM
Has anyone ever had PRTG WMI Sensors Shutting down the WMI Service on server2012 and corrupting windows log files?
Article Comments
Hi there,
Sounds quite odd. Are you referring to things getting messed up at the monitored hos...
Tue, 10 Jun, 2025 at 9:53 PM
I am trying to add the VMware host hardware sensor (SOAP) but am getting an error for incorrect password. I have reviewed the KB that describes which characters are not okay and I have confirmed that none of these characters are being used...
Tue, 10 Jun, 2025 at 9:53 PM
Hallo,
ich möchte gern in einen Testsystem die Python Mini Probe auf einen Ubuntu Server 16.04.1 betreiben, um andere Netzwerkgeräte (Ping) zu überwachen und diese Mini Probe dann an einem entfernten Core Server anzubinden.
Ich komme leid...
Tue, 10 Jun, 2025 at 9:53 PM
Is it possible to get a list of users that accessed a specific file and/or folder on a Windows machine?
Article Comments
Hi there,
As far as we know there is no possibility to monitor certain accessed files on a server. But if...
Tue, 10 Jun, 2025 at 9:53 PM
Would like to know if there is a way to collect the arp entry (mac address) for a PING sensor. If there isn't a way, is this something that you might consider adding in the future? This would be very useful in troubleshooting when de...
Tue, 10 Jun, 2025 at 9:53 PM
Hey
I'm trying to setup some custom SSH script sensors for a linux MySQL server.
This is how my first script looked:
!/bin/bash
if ps -p $(cat /var/run/mysqld/mysqld.pid) > /dev/null 2>&1
then
echo "0:200:Service ...
Tue, 10 Jun, 2025 at 9:53 PM
I have added my custom EXE to %Programfiles%\PRTG Network Monitor\Custom Sensors\EXE as stated in the documentation on adding an EXE sensor. The problem I'm having is that when I go to add the sensor to the parent device I'm not see...
Tue, 10 Jun, 2025 at 9:53 PM
I have a Powershell script that uses Get-WBSummary to retrieve the Windows Server Backup summary, but this is failing as PRTG only runs scripts on Powershell 32bit as there are no Windows Server cmdlets available to be registered, only in P...
Tue, 10 Jun, 2025 at 9:53 PM
I like to add uptime to a SNMP Custom Advanced (System health sensor for a Cisco Router)
OID 1.3.6.1.2.1.1.3.0
the value that is 1/100 of seconds
How can i make it like the current standard PRTG sensor? So that i can see uptime in ...
Tue, 10 Jun, 2025 at 9:53 PM
Is there any timeframe when the mini probe will support redhat linux?
Article Comments
It's not officially tested, but have you tried it already? As the prerequisites should be available on RHEL as well...
May, 2016 - Pe...
Tue, 10 Jun, 2025 at 9:53 PM
I am confused about how ipfix is implemented in PRTG. I setup my initial ipfix sensor on my DMZ router monitoring just one port to upstream ISP. I now have another switch port i need to monitor for ipfix. When I add the sensor and collect i...
Tue, 10 Jun, 2025 at 9:53 PM
Hi everyone,
I stumbled upon this: https://helpdesk.paessler.com/en/support/solutions/articles/39883-libraries-in-maps
And wanted to expand upon it, because the code given creates a Library Tree.
Say I wanted to make the Library a Sunbu...
Tue, 10 Jun, 2025 at 9:52 PM
Hello,
I am starting with PRTG and have a few questions regarding Mac OS X.
I would like to monitor memory total memory usage and memory usage by the process if that is possible.
I enabled SNMP and SSH on Mac OS X 10.10.5
SNMP Linux M...
Tue, 10 Jun, 2025 at 9:52 PM
