kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I'd like to monitor my Citrix Xen hypervisor and see its CPU usage and memory usage. We have that ability for VMWare through the VMWare ESX monitor, but is it possible to do something equivalent with Xen?
Article Comments
H...
Tue, 10 Jun, 2025 at 11:44 AM
On the Chrome Web Store there are various apps avaialble that for example login to a website. Is there also an app that I can use to login into my PRTG server?
Article Comments
A general app that logs in to your PRTG server cann...
Tue, 10 Jun, 2025 at 11:44 AM
Hello, at the last week I was apresented the PRTG for my custumer and some question grew.
why the "others" always appears as number 1 at the toplist connections ? I've checked the link below but my question is:
https://www...
Tue, 10 Jun, 2025 at 11:44 AM
I'm trying to create some composite (multiple channels in one "sensor") sensors, based on custom SNMP oid's. For example: Switch cpu load 1s/1m/5m, which isn't in the standard sensors. Now i could first add 3 custom oi...
Tue, 10 Jun, 2025 at 11:44 AM
The release notes for v.9 mention this:
Added a "Dependency Delay" feature
I assume this might mean I could set a delay when a ping sensor comes back online before the other dependent sensors are unpaused.
Can someone explai...
Tue, 10 Jun, 2025 at 11:43 AM
Hello,
Is it possible to make a user when they log in only see the reports menu and no others? What I want is a user to only see the reports that are generated for them and not have the ability to look at any other information.
Any help...
Tue, 10 Jun, 2025 at 11:43 AM
Hi,
I'm using the email notification if a ping sensor of a device is down for 12 hours.
Is it possible that the sensor list of the down device be in that email?
I didn't this option in the placeholders..
can anyone help?
Thanks,
...
Tue, 10 Jun, 2025 at 11:43 AM
Dear PRTG,
Our company use PRTG v8.4.2.2380.
We did setup Active Directory Replication Sensor and it works, but it shows that we have some 22 errors (Domain controllers reported 22 errors). If look in log file of sensor then we see only t...
Tue, 10 Jun, 2025 at 11:43 AM
Hi,
I have a group with about 1000 devices. each of them have a ping sensor.
I need to change the scanning interval of all the ping sensors.
how can I select all of them so i can make the change?
Thanks
Meir
Article Comments
...
Tue, 10 Jun, 2025 at 11:43 AM
I'm getting a "Socket Error # 10048 Address already in use." sensor error that is connect to our esx. It will go into error about every 30 minutes then clear within 20 sec.
Article Comments
Hello,
this error usu...
Tue, 10 Jun, 2025 at 11:43 AM
Hi,
We want to add comtech-625 satellite modems for monitoring the bandwidth utilization on different interfaces of the modem. The modem has 4 interfaces but when i'm adding this modem to the PRTG monitoring, i can only see 1 interfac...
Tue, 10 Jun, 2025 at 11:43 AM
I'm just getting started with the network monitor. I put in 6 ips for discovery. 3 servers and 3 switch's. It didn't pick up any switch's. What am I doing wrong? They are Cisco 2960G series switch's.
Article...
Tue, 10 Jun, 2025 at 11:43 AM
Hello,
I have been using several monitoring tools for production servers so far and I must admit, I am very satisfied with PRTG. I am still testing it though and we might buy it very soon.
More or less we are interested in Database and...
Tue, 10 Jun, 2025 at 11:43 AM
Hello,
First I would like to say I really love the new automatic Function.
But is there an way to Improve it a bit?
Make an Button "restart now" so the Server does not restart automatically after applying the Patch
Same for...
Tue, 10 Jun, 2025 at 11:43 AM
Is it possible to disable all notifications for all sensors except for some critical ones like PING, service availability,...? It is annoying to receive messages when PRTG is not able to connect to the HDD, CPU, whatever WMI for a few minut...
Tue, 10 Jun, 2025 at 11:43 AM
I'd like to be able to use the new automatic update feature, but our servers don't have direct internet access available.
Is it possible to get the server to check for and download updates via a proxy server?
Article Commen...
Tue, 10 Jun, 2025 at 11:43 AM
Is Netflow sensors supported on the free version of PRTG Network Monitor?
Article Comments
Hello,
Netflow Monitoring is available in the Freeware version of PRTG 8 and 9.
best regards.
Sep, 2011 - Permalink
Tue, 10 Jun, 2025 at 11:43 AM
What is the routine to add a sensor that is a Windows Performance Monitor Counter but not in the list of PRTG sensors?
Thanks
Article Comments
I ran into an issue where I wanted to see a perfmon counter in PRTG as well. I use...
Tue, 10 Jun, 2025 at 11:43 AM
In a report, we can see uptime values as follows:
Sensor A: 100 % [26d18h54m44s]
Sensor B: 100 % [26d18h59m43s]
Both sensors are in the same report, for exactly the same date range, and has been completely up and running within that da...
Tue, 10 Jun, 2025 at 11:43 AM
I am trying to add a custom SNMP Sensor using an OID obtained by using a MIB Browser on an Equallogic SAN. However I am getting an error indicating "No Such Name (SNMP error #2). I have some traffic monitors set up already but would ...
Tue, 10 Jun, 2025 at 11:43 AM
I see sensor details on my Sensatronics Environmental monitor, but for some reason, the Device Comments are reporting the IP address repeatedly. Is there a way to turn off the Device Comments?
Article Comments
sorry, the commen...
Tue, 10 Jun, 2025 at 11:43 AM
Hi,
Just to check, everytime we generate monthly report on server uptime, it always shows few minutes downtime even there is no server downtime within that month.
Regards,
Jeffery
Article Comments
Dear Jeffrey,
can you se...
Tue, 10 Jun, 2025 at 11:43 AM
When adding a sensor to device named: VM1
VM OS: Windows 2008 R2 SP1 64-Bit
I get this error: 80041010: The specified class is not valid.
I have looked at your KB of the WMI, and followed everything. Still no luck, I can add WMI for fre...
Tue, 10 Jun, 2025 at 11:43 AM
I created a custom WMI sensor to measure Network IO Wait for SQL Server. Here is the query:
SELECT NetworkIOWaits FROM Win32_PerfFormattedData_MSSQLMSSQLSERVER2008_MSSQLMSSQLSERVER2008WaitStatistics WHERE name='average wait time (ms)&...
Tue, 10 Jun, 2025 at 11:43 AM
I'm trying to create a single graph that shows the aggregate of all of our internet feeds on one chart. I've set up a standard sensor factory sensor with the following definition:
#1:Traffic in [mb]
((Channel(2693,0) + Channel(2...
Tue, 10 Jun, 2025 at 11:43 AM
The new v9 version of paessler has some issues wit autodiscovery and sets every device (at least in my environment) to a xerox machine and tags it as such.
Does anybody know of a way to clear all tags from the paessler DB?
Artic...
Tue, 10 Jun, 2025 at 11:43 AM
Is it possible that the failover server only monitors some sensors in case of an error (mainserver)?
I am only searching for a solution to bring notifications out if my internet connection fails.
Would you prefer to set up a free-prtg-e...
Tue, 10 Jun, 2025 at 11:43 AM
Hello,
i have one network in a city that i will monitor using PRTG. But: if the internet connection fails, notifications will be not delivered to me.
So, at one other location i could install a failover cluster (but in case of failover ...
Tue, 10 Jun, 2025 at 11:43 AM
i cant seem to find where the logs of deleted devices are stored. i want to know who deleted a specific device.
Article Comments
Whenever an object is deleted PRTG writes a log file entry into the log of the parent object. So pl...
Tue, 10 Jun, 2025 at 11:43 AM
Trying to use SQLxpXML.EXE to get some data from SQL Server, I'm getting constant errors.
What have i done:
- changed PRTG services to run under user account
- set "Set placeholders as environment values"
- security is on &qu...
Tue, 10 Jun, 2025 at 11:43 AM
I'm trying to publish PRTGMON through ISA 2006 in order to make PRTGMON APP to work with my PRTGMON server. But whatever i try almost everytime i get an 1790 The network logon failed error. Anyone dealed with this before ?
I have conf...
Tue, 10 Jun, 2025 at 11:43 AM
Hi i have a Cisco RV 042. The probem is that every time the ppp0 reconects a new id is generated so the prtg stops to monitoring it. Is there a way to prevent it?
Thanks,
Article Comments
Hello,
which exact version of PRTG ar...
Tue, 10 Jun, 2025 at 11:43 AM
Dear Sir
I want to send SMS Notification using GPRS USB Modem. I am trying to use Mobile Master software. Could you show me how to configure PRTG with Mobile Master? Pleae more specific
Thanks a lot
Article Comments
hallo,
...
Tue, 10 Jun, 2025 at 11:43 AM
I have been using a CloudWatch sensor for a couple months to monitor 4 EC2 instances of ours. For a week now, 3 of them are reporting "Access denied. Please check your access keys. (code: PE080)". These 3 happen to be on the Eas...
Tue, 10 Jun, 2025 at 11:43 AM
Connection times out when trying to connect to web server.
Internet access perfect, firewall/ports all opened etc.
Even tried on a SoHo Linksys modem/router.
Article Comments
Hello,
can you please elaborate where PRTG is i...
Tue, 10 Jun, 2025 at 11:43 AM
Hello,
i would like to automatically save cisco device configuration on a scheduled basis.
I know it can be done using cisco devices themself (archive command/kron) but i would like to use PRTG, just because i have around 100 devices alr...
Tue, 10 Jun, 2025 at 11:43 AM
Hi,
After installing prtg traffic grapher on the same server that runs Isa Server 2006, I need to setup some rules in ISA. (Need to control internet traffic)
Could you explain what rules I need to create, configure ?
Thanks in advace
Tr...
Tue, 10 Jun, 2025 at 11:43 AM
Dear Support,
How can I arrange the probes, devices and groups in PRTG 9?
Regards,
Natasha.
Article Comments
Hello,
this can be done using Drag&Drop in the "Management"-tab in the Ajax-Interface or using Li...
Tue, 10 Jun, 2025 at 11:43 AM
I have two servers that on a weekly basis will give me this error
Last Message: WMI request timed out. Probe's WMI system had to be stopped. Please pause or delete sensor and restart probe! (code: PE051)
There is no problems with t...
Tue, 10 Jun, 2025 at 11:43 AM
Is it possible to forward/attach syslog messages received by the sylog receiver of prtg to its corresponding device in prtg? For example Syslog messages received from serverA by the syslog receiver and forward them to the log tab of server ...
Tue, 10 Jun, 2025 at 11:43 AM
Dear Support,
We upgraded the PRTG to the version 9.1 and we are trying to add a SNMP sensor for the disk of a Unix machine to monitor the free space but we need to monitor the disk remaining. If less than 80% of the disk is used we need ...
Tue, 10 Jun, 2025 at 11:43 AM
I am adding a sensor from an SMTP Library based on a MIB I imported from HP. The sensor is "cpq he thermal condition" and it will return one of the following values: 1 = other, 2 = ok, 3 = degraded, 4 = failed. When I go to th...
Tue, 10 Jun, 2025 at 11:43 AM
I am running PRTG 7 and used the MIB V2.1.1 for PRTG 7 to import CISCO-ISDN-MIB.my. I saved my library as CISCO-ISDN.oidlib in C:\Program Files (x86)\PRTG Network Monitor\snmplibs. But when I go to add the sensor, the new SNMP library does ...
Tue, 10 Jun, 2025 at 11:43 AM
Is there a way to automatically update changed Cisco interface descriptions on some sort of schedule? We have interface descriptions that change frequently when customer's move in and move out.
Article Comments
we are alrea...
Tue, 10 Jun, 2025 at 11:43 AM
Hello,
I have the following problem when reading out a sonicwall NSA 2400 or NSA 3500. On both i have the same situation.
I want to read the bandwith usage through snmp. This is working fine but i have to quess the interface names becau...
Tue, 10 Jun, 2025 at 11:42 AM
Hi,
we've an Problem with the IE. Sometimes the IE reserve more and more RAM (1GB and more PER USER). Therfore I want an Sensorf for this.
I want an Alert when IE.exe need more the 500MB RAM.
Any Idea how I can do it?
Article ...
Tue, 10 Jun, 2025 at 11:42 AM
When importing a large MIB (particularly, POWERNET401.MIB, which you can find through Google) MIB importer locks up, going to "Not responding".
Suspect this is related to the number of items in the MIB, but is there a possibility ...
Tue, 10 Jun, 2025 at 11:42 AM
PRTG Network Monitor 9.1.1.1644
How do I view the Geo Map? Somehow I think I hid it. I have already pasted in some api code from Google sucessfully.
Article Comments
Hello,
are the "GeoMaps" enabled in the System...
Tue, 10 Jun, 2025 at 11:42 AM
I have tried following formula for a channel definition in a Sensor Factory:
1:Uptime %
100-Channel(2004,-4)
(2004 is an ID of a PING sensor in my test case; -4 is downtime channel of a PING sensor)
Above formula seems to work only...
Tue, 10 Jun, 2025 at 11:42 AM
Hi,
I'm getting an error in the event log when a tweet is sent as alarm -
"The remote server returned an error:(403)Forbidden"
The tweet is getting sent and I received it on the twitter account.
what do do with this error?
...
Tue, 10 Jun, 2025 at 11:42 AM
When I log into PRTG I am usually sent to one of the dashboards (dashboard1/2/3).
But now, since I upgraded from V8 to V9 I get:
Sorry, the selected object cannot be used here or it does not exist
Article Comments
After lo...
Tue, 10 Jun, 2025 at 11:42 AM
Dear Support,
The configuration to user access aren't working. We need to setup different users that have diffent access to the sensors. The users access only their sensors and the other users must not see the sensors of each other. I...
Tue, 10 Jun, 2025 at 11:42 AM
About every 10 minutes or so the PRTG 9 Web-interface times out and I have to click ok for it to refresh. Is this a known issue?
Article Comments
Hello,
is this a local connection on the PRTG Host? If not, is the issue the sam...
Tue, 10 Jun, 2025 at 11:42 AM
Is there a way to show a dashboard to unauthenticated users to the web interface? I would like to iframe a dashboard into my intranet so users can see the status of the servers.
Regards
Peter
Article Comments
Hello,
this c...
Tue, 10 Jun, 2025 at 11:42 AM
Hi,
I´m a new customer, using the Trial version in a Win7 box.
The thing is, I´m trying to get sFlow data that a H3C S5500 switch is providing, but when I set the sFlow sensor in PRTG it show "no data since startup".
Using Wires...
Tue, 10 Jun, 2025 at 11:42 AM
PRTG is installed on a network server behind a firewall, monitoring inside the network. I want to install the enterprise console on a PC outside the firewall, to connect to the database. What ports do I need to forward to enable this?
...
Tue, 10 Jun, 2025 at 11:42 AM
guten tag,
wie ich bereits weiss, haben sie keine möglichkeit erfahrungswerte über domino und prtg zu sammeln, da sie keinen domino server in der testumgebung haben.
bei uns ist lotus notes aber dreh- und angelpunkt, denn auch unser crm...
Tue, 10 Jun, 2025 at 11:42 AM
I'm using Netstream.I tested PRTG server with netflowtester and netflowgenerator..
This is my netflowtester log
======================================
time,start,end,source,destination,size
9/30/2011 7:11:15 PM,9/15/2011 1:14:56 PM,...
Tue, 10 Jun, 2025 at 11:42 AM
I already tried the SNMP Traffic sensor and it shows only the management port. (also played with the SNMP Settings of the Switch) The switch offers SMI-S too, can I use it?
Article Comments
Hello,
please use our SNMP Tester to...
Tue, 10 Jun, 2025 at 11:42 AM
When we first found your HTTP SSL Certificate Expiry we were quite excited to have this functionality to our PRTG monitoring. However, the sensors are all now timing out. There have been no changes on our network or to our systems. They...
Tue, 10 Jun, 2025 at 11:42 AM
Via a PHP script I check to see if replication between 2 MySQL servers is running. If it is not, I return a value of 1.
I can add a notification for value change, but I cannot set the sensor to down. As such, the notification options I h...
Tue, 10 Jun, 2025 at 11:42 AM
I get the following "Latest auto-update message"
10/12/2011 9:32:47 AM Automatic update is not available (Unknown license key). Please update manually by visiting https://www.paessler.com/login.
What's going on?
A...
Tue, 10 Jun, 2025 at 11:42 AM
when i view the graphs in live data i can sometimes see my connection utilizing as much as 50 - 60 mbps yet when i go on the 2 day or 10 day map this decreases as if its averaging out the data over the set amount of days.
is there a way...
Tue, 10 Jun, 2025 at 11:42 AM
Is there a report we can run that will give us a list of groups/devices/sensors and privilege level on each that a given user or user group may have? We have customers and non-admin users who should only be able to see their own devices or...
Tue, 10 Jun, 2025 at 11:42 AM
Hi guys,
I am looking to set up "disk space sensors" for NetApp CIF's. How would I go about doing this? I see that there are no built in sensor for this.
Suggestions?
Thanks,
Jon
Article Comments
Hi Jon, ...
Tue, 10 Jun, 2025 at 11:42 AM
Using the active directory integration of version 9, I've noticed that although my users get added to PRTG, their user account does not have an associated email address in PRTG. So I cannot send emails to these users without first havin...
Tue, 10 Jun, 2025 at 11:42 AM
I upgraded to v9. I am trying to integrate with AD. Have entered my domain name but it will not save. The bar turns pink at the bottom of the page. I logged in as prtgadmin to do this.
Article Comments
Hello,
which exact versi...
Tue, 10 Jun, 2025 at 11:42 AM
Currently I am monitoring mbps and #'s of discards for two OC-3's. However the "mbits" is on the left side of the graph and I would like to put it on the right side swapping it with the discards scale. The newest informati...
Tue, 10 Jun, 2025 at 11:42 AM
It is extremely annoying when i click on a device and view the list of it's sensors, that the columns are not re-sizable. Actually, the "sensor" column appears to be plenty wide enough, it's just that the sensor name is t...
Tue, 10 Jun, 2025 at 11:42 AM
I am testing the new period definitions for schedules.
I have this schedule priods definiton for my test notification:
mo:22:00-tu:05:59
tu:22:00-we:05:59
we:22:00-th:05:59
th:22:00-fr:05:59
fr:22:00-sa:05:59
sa:22:00-su:05:59
su:22:00-m...
Tue, 10 Jun, 2025 at 11:42 AM
Is is possible to have sensor channel settings inherit? I.e i want all my snmp traffic monitor sensor channels to plot on a 0-100 mbits vertical axis, rather than be dynamic. Is there a way of setting that at device level and have that pr...
Tue, 10 Jun, 2025 at 11:42 AM
I am using PRTG free version 9.1.2.1697.I have added 14 cisco devices and added sensors to each device.But all the sensors are in paused mode except for the first device.I checked the licensing too and it shows the status OK.
So how can i a...
Tue, 10 Jun, 2025 at 11:42 AM
We're looking at moving a PRTG installation into the cloud. Do you have a recommendation on what service providers are best suited to accommodate that?
Article Comments
Hallo,
we are running a lot of installations in diffe...
Tue, 10 Jun, 2025 at 11:42 AM
I am trying to add a SQL 2008 Probe to monitor user connections but I get the following class error.
Class(es) not found: "Win32_PerfRawData_MSSQLSERVER_SQLServerSQLStatistics"
The server is 2003 Standard SP2 (x86) and SQL is ...
Tue, 10 Jun, 2025 at 11:42 AM
From the looks of things PRTG stores all of it's backups in a folder named 'Configuration Auto-Backups' on the local machine, is there a way to store these backup files somewhere else but keep all the ProgramData still on the lo...
Tue, 10 Jun, 2025 at 11:42 AM
Dear support,
How can I make backup of PRTG?
Could you please help me?
Regards,
Natasha.
Article Comments
Please see How do I backup all data and configuration of my PRTG installation?
Oct, 2011 - Permalink
The fold...
Tue, 10 Jun, 2025 at 11:42 AM
In version 6, you could setup the Webserver so it had unlimited access. I use this on our Intranet and I would like any user to be able to READ the graphs etc. without having to type in a User Name/Password, Is this possible in version 7 ...
Tue, 10 Jun, 2025 at 11:42 AM
I have a couple of windows services running which I can monitor in 2 ways.
1. using the wmi service sensor
2. using the wmi process sensor
The problem is that I want to functionality of both!
The service sensor allows me to restart t...
Tue, 10 Jun, 2025 at 11:42 AM
Hello!
Users will complain of network slowness at certain times of the day. What is the best way to setup PRTG to detect the causes of this slowdown?
Thank You!
Flan
Article Comments
There is no standard answer to your quest...
Tue, 10 Jun, 2025 at 11:42 AM
I have APC snmp management cards sending SNMP traps to PRTG. I have an SNMP trap receiver on PRTG capturing the snmp msgs. I then have a notification trigger set to email these msgs to me. The issue is, all APC msgs come in on the same O...
Tue, 10 Jun, 2025 at 11:42 AM
Hello,
We have a lot of sensors and several people to monitor them. We would like to be able to assign sensors to users so that each user only gets notified for his scope.
We could not manage to configure that with our PRTG Network Moni...
Tue, 10 Jun, 2025 at 11:42 AM
I need to combine the source data from many different interface traffic (in and out) into a single graph.
Article Comments
Hallo,
please take a look at the sensor factory sensors
https://www.paessler.com/manuals/prtg9/sensor...
Tue, 10 Jun, 2025 at 11:42 AM
In version 7.3 we were able to add several graphs (of sensors) at once in the map editor. (Add Map Item, then select several sensors to add from the sensor list.)
In version 8, when adding a map item, there is the navigator with the senso...
Tue, 10 Jun, 2025 at 11:42 AM
We're using a government/ISP provided connection which is reliable, and bandwidth never really changes (relatively speaking). We want to be able to specify the maximum bandwidth available on a graph/chart to show users a comparison as...
Tue, 10 Jun, 2025 at 11:42 AM
What terms should I use when setting up a sensor and including/excluding the OutboundInterface? Would it be OutboundInterface[POS1/0] or is it looking for a different filter term?
Article Comments
Hello,
the Interface-Filter-F...
Tue, 10 Jun, 2025 at 11:41 AM
What is the best settings for the scan interval and for example the CPU High Limit Error?
Article Comments
Hello,
there might not be 'the best setting' for this. You will probably use different scanning intervals on yo...
Tue, 10 Jun, 2025 at 11:41 AM
When updating prtg it asks for a restart. Is this really necessary? Restarting a server is not very favored.
What is done by restarting? If only the services need to be started, this could be done manually as well.
Article Comment...
Tue, 10 Jun, 2025 at 11:41 AM
I have installed a remote probe on a laptop. I have an installation of prtg on a local server. The probe and server all work fine. I add a packet sniffer sensor and it also works fine. But when I turn on the port mirror on the cisco 296...
Tue, 10 Jun, 2025 at 11:41 AM
Hi, I have two questions. If I acknowledge and alarm, does it pause the alarm just for that specific server. For example if I acknowledge a disk space alarm for server x, does it pause all disk space alarms, or just for server x.
2. When ...
Tue, 10 Jun, 2025 at 11:41 AM
I encountered a problem with PRTG 9 where if I changed the HTML Before and After fields on a map object, it would all get merged into the HTML Before field.
When I issued a ticket, the response I got was that it would be fixed in PRTG 9. ...
Tue, 10 Jun, 2025 at 11:41 AM
Dear support,
We are trying to setup that: Step 2: Check an IMAP mailbox until email arrives
When we are on the step "Mailbox", we know that we need to put something, but we don't know what and we don't know where we fin...
Tue, 10 Jun, 2025 at 11:41 AM
I know that there are certain limits with the amount of monitors and the type per probe and per installation. I was wondering if this amount changes at all if we would only have 250 sensors per remote probe. If my calculation is correct wit...
Tue, 10 Jun, 2025 at 11:41 AM
Hi Paessler
We have a connection towards one of our vessels which is reachable most of the time. When the vessel is out of range the link goes down and shows as an alarm. For this link this is acceptable. Is there a way to keep this link ...
Tue, 10 Jun, 2025 at 11:41 AM
Hello everyone! There was a necessity to switch a sensor in a pause at transition in critical two sensors, for example availability of the server depends on availability two Internet of channels. How it can be made?
thanks
Article...
Tue, 10 Jun, 2025 at 11:41 AM
Hello everyone, my network monitoring with PRTG every day earns more hits. but still there are something that I have to fit. so go ahead...
it's possible do monitoring a router cisco by two ip address it ? for exemplo, these router ci...
Tue, 10 Jun, 2025 at 11:41 AM
Within PRTG 9 Web interface I added an IP to allowed under probe connection settings but could not get it to work until I discovered more settings within the Server Administration Tool under the Core Server Tab which had to be set to accept...
Tue, 10 Jun, 2025 at 11:41 AM
Hi
as Administrator I apreciate the search box at the most to right corner...
I created a Read Only accounts for my users to access PRTG result.
Unfortunately my (RO-) users have no search funktion...
How to enable?
Thanks
Fisch...
Tue, 10 Jun, 2025 at 11:41 AM
Wie könnte PRTG konfiguriert werden, das geplante Serverneustarts (z.B. Einspielung WSUS-Updates) nicht als Fehler angezeigt werden? Wenn ich mir ca. 150 Server vorstelle, die teilweise wöchentlich neu gestartet werden (automatisch, nachts)...
Tue, 10 Jun, 2025 at 11:41 AM
I have a server with SAP installed. The is one event which is trigged regularly as a error. This failure can not be solved. I want prgt to report every error.
So my question is it possible that you define a expetion for a special event id...
Tue, 10 Jun, 2025 at 11:41 AM
I'd like to know which OID are used in "SNMP Traffic" sensor
Article Comments
OIDs Used in SNMP Traffic Sensor
64bit
In Traffic 1.3.6.1.2.1.31.1.1.1.6.X
Out Traffic1.3.6.1.2.1.31.1.1.1.10.X
In Unicast pa...
Tue, 10 Jun, 2025 at 11:41 AM
