kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I would like to be able to setup a rule as follows
When total utilization of CPU is >95% for 3 mins or more then set CPU utilization sensor to error/down (red status alert)
I don't want to send any email notifications. I just...
Tue, 10 Jun, 2025 at 4:26 PM
Hello,
I'm having some issues with the syslog receiver. Every time I try and search for a data that doesn't exist the probe disconnects. I've had this issue for Over a year now. I did contact support and they confirmed it to b...
Tue, 10 Jun, 2025 at 4:26 PM
Hello team,
can I use a WIN Server 2019 Essential 64-Bit as a Remote Probe?
Article Comments
Hello Sabine,
Yes, you can :)
Kind regards,
Erhard
May, 2019 - Permalink
Tue, 10 Jun, 2025 at 4:26 PM
I am trying to find a way to monitor all the switches in our company and to notify if there is a particular port that goes down and if a MAC address plugged into a port changes. Are there sensors to do this? Thank You!
Article Comme...
Tue, 10 Jun, 2025 at 4:26 PM
Hi i got a seperate Network for outr CCTV. I wanna monitor those Cams but there are in a physical and logical different Network. What is the easiest way to monitor them ?
Article Comments
Hi Dennis,
It depends, most IPTV came...
Tue, 10 Jun, 2025 at 4:26 PM
Hi.
The reason for this is to consult a question about the SQL Server Sensor.
Currently, I am running a Select query that can return multiple rows (Only one column). The conditions for this sensor to be executed are the following:
- Good ...
Tue, 10 Jun, 2025 at 4:26 PM
I'd like monitor the following event log of my Windows Server 2019 box running Storage Spaces, but I can't see how to access it with either of the standard event log sensors:
Microsoft-Windows-StorageSpaces-Driver/Operational
%Sys...
Tue, 10 Jun, 2025 at 4:26 PM
I an trying to figure out how to add user notification to my slack messages, but cannot find a reasonable way to do it.
I have attempted to use the "send slack message" but get a clear error that <> characters are not allowe...
Tue, 10 Jun, 2025 at 4:26 PM
I would like to cancel an auto-discovery running in PRTG. How can I stop it?
Article Comments
In order to stop a running auto-discovery, right-click the group or device, and select Pause | For 5 minutes... from the context menu....
Tue, 10 Jun, 2025 at 4:26 PM
Hi there,
i already build some custom sensors (templates) to monitor our cisco telepresence endpoints.
All doing well except that one:
The expression filter doesn't work for me.
With jsonpath.com my JSONPath Syntax looks ok and gave...
Tue, 10 Jun, 2025 at 4:26 PM
I have a sensor using HTTP Data Advanced, it pulls the properly structured JSON and returns 3 different values. I have a map where I'd like to display those 3 values in a minigraph. I can do this manually by polling each value seperatel...
Tue, 10 Jun, 2025 at 4:26 PM
I would like to allow PRTG push notifications to override the Do Not Disturb mode on my iPhone. When will PRTG support that?
Article Comments
Unfortunately, the answer is: probably never. Apple denied our application for the Cri...
Tue, 10 Jun, 2025 at 4:26 PM
We are trying to attach Our IT Watchdog temperature sensors.
They can communicate with Snmp, over the network. It ha a V1 Trap and V2C Notify feature. It appears as if they are able to send the data out, but we can't find a way for P...
Tue, 10 Jun, 2025 at 4:26 PM
How can I test a Telephone Server in PRTG?
Article Comments
Hi there,
Please check the following Knowledge Base post for more information about monitoring VOIP services with PRTG:
VoIP Monitoring With PRTG
I hope this help...
Tue, 10 Jun, 2025 at 4:26 PM
Is there a ready to use sensor about the product Reisenkosten of Lexware?
Article Comments
Hi there,
Unfortunately, PRTG does not have a sensor to monitor Lexware. As far as we know there is also no custom sensor.
You can ho...
Tue, 10 Jun, 2025 at 4:26 PM
Does a custom sensor, or any helpful sensor for this product exist in PRTG?
Article Comments
Hi there,
Unfortunately, PRTG does not have any sensor for the mentioned system, as far as we know there is also no custom sensor to ...
Tue, 10 Jun, 2025 at 4:26 PM
Hello,
I would like to monitor my RAID mdadm on my linux with a sensor, does it exist?
Because it's pretty important to be able to monitor the RAID ...
thank you in advance
Regards
Article Comments
Hi there,
Ther...
Tue, 10 Jun, 2025 at 4:26 PM
Hi,
I have a list of ip's that i need to add, they only need to have ping sensor.
/Casper
Article Comments
Hello Casper,
The best approach to only monitor sensors of your choice might be device templates. You can creat...
Tue, 10 Jun, 2025 at 4:26 PM
Is there in PRTG a custom sensor about the Payroll product of company SAGE HR?
Article Comments
Hello there,
So far no custom scripts have been submitted for this. We usually list all custom scripts in PRTG Script World that w...
Tue, 10 Jun, 2025 at 4:26 PM
hi dear
i have a lot of sensors that i want to Changing their Connection Status Handling of "show alarm for all disconnecred states" to Ignore all disconnected states in their setting
can i do it
kind regard
somaye
Arti...
Tue, 10 Jun, 2025 at 4:26 PM
I'm using a ping sensor to monitor our SIP endpoint from our local LAN.
We have multiple WAN links, and i would like to have a sensor that monitors the endpoint across each of the wan link, to be able to determine if an issue is with...
Tue, 10 Jun, 2025 at 4:26 PM
Hi,
I am looking to migrate two different older versions to a new one. Is it possible to export groups/devices/sensors and details in to a csv or similar format where I consolidate both files in to one and import this to the newer one. ...
Tue, 10 Jun, 2025 at 4:26 PM
hi
i want to create a uptime snmp sensor with 64 bit oid in prtg.
so i do it:
add oid: 1.3.6.1.2.1.6.18 (64bit) in device then add a snmp cutom sensor in prtg and enter 1.3.6.1.2.1.6.18 in OID Value in sensor, but the sensor has "SNM...
Tue, 10 Jun, 2025 at 4:26 PM
I need to generate a report/list of where is a notification template in use by a node/object. Article Comments Hello AlbeLouw, Thank you very much for your request. Please navigate to "Setup | Account Settings | Notification Template...
Tue, 10 Jun, 2025 at 4:26 PM
How do a globally rename a tag? Say I have a tag called PRTG_IS_OKAY and I want to rename to PRTG_IS_GOOD. I want to rename name the PRTG_IS_OKAY tag reference in all reports and factory sensors as well as any tag located to groups, devic...
Tue, 10 Jun, 2025 at 4:26 PM
I have recently enabled dfs replication on a folder from within a mount point and now my sensor will error stating "Query returned "capacity = 0". Can not process data (code: PE088)".
The sensor is monitoring free disk...
Tue, 10 Jun, 2025 at 4:26 PM
I'm trying to export a list of devices and their parentIDs using the api and PowerShell. I have the lines entered to ignore invalid SSL certs and if I paste the following URL into a web browser, it works fine after clicking SaveAs and p...
Tue, 10 Jun, 2025 at 4:26 PM
Dear Support team,
Is it possible to customize the html format in email notification?
Thanks for your helps
Article Comments
Hi Hossein,
Please check our Stance Regarding Customizations Of PRTG, as it applies to all parts of P...
Tue, 10 Jun, 2025 at 4:26 PM
hi
any artical that can help me configure prtg to monitor
ruckus smart zone and ap?
thanks
Article Comments
Hi there,
Unfortunately, PRTG does not offer native sensors for Ruckus AP devices. If the device supports SNMP, p...
Tue, 10 Jun, 2025 at 4:26 PM
I'm trying to setup a Notification trigger for http action to post to our status page using API.
I keep getting an HTTP 401 unauthorised error. I want to use an API key to connect.
So far I have this working from postman.
my head...
Tue, 10 Jun, 2025 at 4:26 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I would like to use the report function to hel...
Tue, 10 Jun, 2025 at 4:26 PM
Hi,
I get OID with basic ups status represented by 64 flags in 64bit string:
5/15/2019 1:17:17 PM (68 ms) : 1.3.6.1.4.1.318.1.1.1.11.1.1.0 = "0001010000000000001000000000000000000000000000000000000000000000" [ASN_OCTET_STR]
...
Tue, 10 Jun, 2025 at 4:26 PM
Hello Paessler Team.
there is the custom ssh sensor feature. Unfortunately this sensore require a script on the destination server.
Is it possible in some way to do this kind of monitoring like with remote powershell in windows?
since P...
Tue, 10 Jun, 2025 at 4:25 PM
Hi,
I hope you can help?
I want to use PRTG to monitor connections within my Cisco ACI multi-pod environment. Has anyone had success in setting this up?
Thanks in advance
bevans34
Article Comments
Bevans34,
We need to se...
Tue, 10 Jun, 2025 at 4:25 PM
Hello,
I would like to know what, exactly, the SSH sensor's "timeout" setting does. For instance, if i set the timeout to 5 seconds, and the script does not complete within 5 seconds, does that simply mean that PRTG will set...
Tue, 10 Jun, 2025 at 4:25 PM
How can you monitor NFS shares on Centos linux boxes?
Article Comments
You can monitor NFS shares using PRTG's SSH sensors.
Feb, 2011 - Permalink
I do not see an SSH sensor in my server. So could you please explain h...
Tue, 10 Jun, 2025 at 4:25 PM
It would be great if we could be alerted if a service starts. Currently we can get an error alert if a service is stopped. However we have some services which can cause issues in our environment and it would be good to get a critical alert ...
Tue, 10 Jun, 2025 at 4:25 PM
Recently I saw the SSL Sensor which returns the remaining valid days for the certificate.
I was wondering if there is a way to create a map that shows the remaining valid days for every monitored certificate totaled up?
For example:
Red -...
Tue, 10 Jun, 2025 at 4:25 PM
Can i install 2 central PRTG servers with 1 licence ? I mean, i readed that paessler recomend to use 30 probes per server, so if i have to install 70+ probes i have to buy 2 different licences to mount 2 servers ?
Article Comments
...
Tue, 10 Jun, 2025 at 4:25 PM
I am trying to setup a Remote probe for one server as we are facing issues in trying to monitor it with the current setup. While doing so, PRTG asks me to switch the probe connection to "All IPs available on this computer". I woul...
Tue, 10 Jun, 2025 at 4:25 PM
Is there a template repository that or forum for template exchange? I'm thinking mostly of device templates but sensor, report and map templates would also welcome a good exchange.
For instance, we have built a custom template for ou...
Tue, 10 Jun, 2025 at 4:25 PM
User Story
As a PRTG User, I want to easily edit device template eg add, removing, editing specific sensors on the device template.
Details of User Story
Current situation when we want to update the template of the device with new sen...
Tue, 10 Jun, 2025 at 4:25 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to have possibility directly goes to pr...
Tue, 10 Jun, 2025 at 4:25 PM
Hey all :-)
Im looking for the best and most secure way to set up PRTG on my network. So that we can access the PTRG via Mobile, besides all the other options (web interface etc)
There are several ideas :
1) Full install of PRTG in D...
Tue, 10 Jun, 2025 at 4:25 PM
Hi,
we have a lot of VMs with custom HTTP sensors. The sensors are configured for 10 channels, 3 of them were spare ones, providing no real data. Now, we started using two of the three spare ones so we would like to rename them accordingly ...
Tue, 10 Jun, 2025 at 4:25 PM
Starting to migrate devices using AUTH/PRIV keys via v3. I can get the manual fetch via net-snmp libraries to work however we're forced to use the the HEX string when passing priv/auth keys (-3k/-3K flag).
Using the Paessler SNMP test...
Tue, 10 Jun, 2025 at 4:25 PM
I need a map, where are alle error's from every sensor without the favourite's
<div class="map_object map_table customalarms_biggerfont" id="<@itemid>" objectid="<@objectid>" subid=&...
Tue, 10 Jun, 2025 at 4:25 PM
Good Day
Like the tittle says, i am trying to put a Status Donut object from some devices that aren't in the same group, from where i understand the status and top 10 objects only work for devices already made on the same group, i can...
Tue, 10 Jun, 2025 at 4:25 PM
Hello scripting support,
Here' my probleme :
$user = "admin"
##mdp
$path = "C:\my\path\to\my\file\myHashPassowrd.txt"
$password = cat $path | convertto-securestring
$cred = New-Object System.Management.Autom...
Tue, 10 Jun, 2025 at 4:25 PM
Hello,
We have two Fiber Lines that we BGP Peer with and occasionally we have latency issues that I cannot track down and the customer service at the carriers can be hit or miss.
Can anyone advise me on the best way to monitor our Inco...
Tue, 10 Jun, 2025 at 4:25 PM
Hi
Upon configuring the connection to our PRTG-server the App keeps giving the error
"Verbindingsfout Time-out van het verzoek", aka. in English "Connection error Time-out of the request"
I'm quite sure I've ...
Tue, 10 Jun, 2025 at 4:25 PM
Hello,
Currently testing the functionalities of PRTG, I wanted to put a probe on one of our test servers.
The PRTG server and the test server are on the same network.
So I try to install my probe and, when the installer connects the p...
Tue, 10 Jun, 2025 at 4:25 PM
Hi,
I have a question about passing parameters to PRTG.
I want to access some data from the webpage of our company and write it in the form of channels with some values in PRTG. To enter the webpage, I have to login with my username and ...
Tue, 10 Jun, 2025 at 4:25 PM
Hello
I have problem in PRTG Android APP
when try to login I get error I could not retrieve the passhash
even I can open it from mobile web browser
any suggestions to solve the problem ?
Article Comments
Hello Ahmed,
T...
Tue, 10 Jun, 2025 at 4:25 PM
Hello,
We have multiple scheduled PDF sensor reports to report uptime SLA. These reports contains only a few, sometimes only 1 sensor (ping sensor).
The paper size is set to A4 with portrait orientation. In this case the output PDF has ...
Tue, 10 Jun, 2025 at 4:25 PM
How do i get the respons back to prtg to set the monitor to red if the valviu is "Files are different" and to grren when the valviu is "Files are the same"
$SourceDocs = Get-ChildItem –Path C:\Temp\EXE\am0ytil.exe | fo...
Tue, 10 Jun, 2025 at 4:25 PM
Hi,
When I create a map with a top 10 overview of for example the least available memory, the top 10 is cluttered with Systemhealth Current and System health voltages sensors. I looked in the library and virtually every 'health sensor...
Tue, 10 Jun, 2025 at 4:25 PM
I'm triying to monit basic stuff (memory, cpu ...) in my windows servers without an Admin account, had to do it because use an admin account for monitoring propouses it's against our security policy, i found out that WMI sensors had...
Tue, 10 Jun, 2025 at 4:25 PM
Hi everyone,
I would like to monitor every single disk of a physical server in order to get informed when any disk goes down and I have to exchange it.
It's a Fujitsu Primergy server.
Containing 6 physical disks (SSDs).
What do I ha...
Tue, 10 Jun, 2025 at 4:25 PM
Good day.
i have a few days trying to configure a notification trigger for a interface in a router that send the notification only went it detects X speed (1024kbits) and remain in use of that amount or more for a interval of time like 1 ...
Tue, 10 Jun, 2025 at 4:25 PM
Hello everybody.
Does anyone already have Datev in Monitoring or the License Manager.
If the license pool is not consistent etc.
Unfortunately, these events do not appear in the Windows Event Viewer
Article Comments
Hi there,
...
Tue, 10 Jun, 2025 at 4:25 PM
Is it possible to setup a postgreSQL sensor with a query that checks a "last updated" timestamp column to make sure the date/time is < 24 hours old? If the last update value is > 24 hours older than the current system date/t...
Tue, 10 Jun, 2025 at 4:25 PM
hi
i can't see more than 100 sensors graphs in a device in prtg
for example in 24 hours tab in a device in prtg i can't see see more than 100 sensors graph
how can i see more than 100 sensors graphs in this tab?
best regard
...
Tue, 10 Jun, 2025 at 4:25 PM
Trying to make a map with various treemaps on it for different remote probes. The issue I am having is some treemaps have groups that are expanded and some that are not and I can't figure out why. If I click on devices at the top nothin...
Tue, 10 Jun, 2025 at 4:25 PM
I've tried to install the new Windows Update Status sensor on a few Terminal Servers that are not on domains, but I get this error:
Acknowledged at 11/10/2013 5:37:38 PM by PRTG System Administrator : Connecting to remote server faile...
Tue, 10 Jun, 2025 at 4:25 PM
I have a powershell script that connects to AWS, I would like to use the access token and secret key that are specified at the device level.
What placeholder can I use?
Article Comments
Hello Bert,
Thank you very much for your...
Tue, 10 Jun, 2025 at 4:25 PM
Hi PRTG Support,
Good day! Would like to ask where can I get the PRTG version comparison?
Would like to compare our current PRTG app version 17.2.31(1000 Sensors) to the latest version of PRTG.
We're planning to update our current PRT...
Tue, 10 Jun, 2025 at 4:25 PM
when i try to add sensors to cisco router and switches the below
port error :rpc server not accessible . Host "ip" user:svc_PRTG , Password ** domain *
Article Comments
Hi there,
It is not possible to add WMI based ...
Tue, 10 Jun, 2025 at 4:25 PM
i have a question about the mqtt round trip sensor.
where can i find the settings to fill in the ip address for the mosquitto broker?
there is no settings tab.
Article Comments
Hi Hoezy,
Thank you for your message.
Please he...
Tue, 10 Jun, 2025 at 4:25 PM
I am new, so bear with me. I have been instructed on how to start using Sensor Factory, and I am liking it. However, I am having a slight issue. I am talking to a UPS, and imported it's MiBs. The oidlib works, mostly. So I am wanting to...
Tue, 10 Jun, 2025 at 4:25 PM
Is it possible to monitoring a Windows Reboot or Windows updates ?
Article Comments
Hi there,
This is what the Windows Update Sensor is for:
https://www.paessler.com/manuals/prtg/windows_update_info_sensor
To check if a ser...
Tue, 10 Jun, 2025 at 4:25 PM
When I try to install PRTG on my system which runs the Anti Virus scanner from Avira (Antivir, Antivirus or Internet Security), I get a warning concerning paesslerdbsensorssda40.dll or other files.
What can I do about this?
Articl...
Tue, 10 Jun, 2025 at 4:25 PM
Is there a way to use one of the HTTP sensors to monitor a search field on a website and return a value if the search is successful? I'm trying to find a way to check to see if a Solr search is working from within the website, as oppose...
Tue, 10 Jun, 2025 at 4:24 PM
Hi,
Is it possible to make my custom sensors Warning/Error limit to refresh after every scan of the sensor?
To be exact: I wrote a custom EXEXML sensor for Disk Free monitoring - which sets the Warning limit to 10GB for a 100GB volume and...
Tue, 10 Jun, 2025 at 4:24 PM
Hello, we have customer who intends to rollout many Android Tablets for kiosk use. We need to be able to monitor these with our PRTG system. But I have read that Mini Probes won't work with out Paessler hosted monitoring system. Do you ...
Tue, 10 Jun, 2025 at 4:24 PM
Hello, bit of a strange one here. A remote probe for around 300 sensors has fallen to the disconnected state. I can toggle the service from services and the prtg administration GUI and no errors. However it does not reconnect and it hasnt w...
Tue, 10 Jun, 2025 at 4:24 PM
We want to create new tags to create new librarys using the new tags
Article Comments
Hi there,
Editing tags via API will replace the existing ones, it's not possible to just add those. The following call will replace th...
Tue, 10 Jun, 2025 at 4:24 PM
We have configured an IPFIX sensor on our Probe device (PRTG Network Monitor 16.1.22.2391 ) and are pointing all of our Netflow data at this probe, from several switches and Virtual Centers.
We can see the Top Talkers and the Live Data bu...
Tue, 10 Jun, 2025 at 4:24 PM
I want to monitor a device through two wan, when a wan falls, it continues to be monitored through the other wan
Article Comments
Isn't this just a routing issue with either a routing protocol in place in a meshed network or...
Tue, 10 Jun, 2025 at 4:24 PM
Hello,
we are using the IMAP sensor to indirectly monitor some Synology NASs. You can't get the information if there are false sectors on a disk via SNMP but the DSM can send mails. We can filter the mails to our needs but we would like...
Tue, 10 Jun, 2025 at 4:24 PM
I would like to use a raspberry pi to make a lowcost webconsole with sound alerts on a big screen.
Article Comments
To make it possible, i spend some time with paessler support to find a solution :
My configuration :
Model ...
Tue, 10 Jun, 2025 at 4:24 PM
Hi There,
Is it possible to define a working hour per device?
I've a device that I wanted to be monitored only in working days and hours , can i configure this setting just for a single device?
thank you
Article Comments
Hi ...
Tue, 10 Jun, 2025 at 4:24 PM
Hallo Leute,
wir haben viele Fujitsu P910 Rechner, welche ein Intel RAID 1 Verbund haben
Treiberversion (Intel SATA RAID Controller) ist die 12.5.0.1066.
Leider finde ich keine Möglichkeit, den Status des Raids per Kommandozeile oder...
Tue, 10 Jun, 2025 at 4:24 PM
Hi,
I have many switches and I have created a template based on one basic switch I use to Autodiscover others. It seems that the SNMP Traffic sensors being created are only that of connected ports, which is what I want and expect. SNMP RM...
Tue, 10 Jun, 2025 at 4:24 PM
Hello,
I try to create a map where we can juste see sensors status for devices with the tag name "Liaison"
I go in map parameters and I see tag filter (or other name, my PRTG is in french) I write the name "Liaison",...
Tue, 10 Jun, 2025 at 4:24 PM
I have around 24000 sensors active on my prtg monitoring our network, i see that 420GB is consumed out if 600GB hard drive. Can you suggest me a way to archive the information and restore back when ever i need it
Article Comments
...
Tue, 10 Jun, 2025 at 4:24 PM
can you please help me to find the sensor which monitors twamp traffic ?
Article Comments
Hi there,
Unfortunately, PRTG has no implemented sensors to monitor this kind of traffic, we are also not sure if information about this...
Tue, 10 Jun, 2025 at 4:24 PM
We have a Microsoft Windows Server 2012 R2 server that overnight WMI sensors have stopped working.
We are getting the following error
Connection could not be established (Cannot initiate WMI connections to host "SERVERNAME". ...
Tue, 10 Jun, 2025 at 4:24 PM
Is there any web Browser supported for RaspBerry Pi 3 B+ running Debian? i just need it for displayi
I tried iceweassel and it says it is not supported and does not let me login as well as chromium.
Thanks
Article Comments
You might want to use a User Agent Spoofer, like the following:
https://chrome.google.com/webstore/deta...
Tue, 10 Jun, 2025 at 4:24 PM
Is it possible to show the past 7 days data on the daily report? As I saw that I can select current or previous week for the report only.
Article Comments
Hi there,
Unfortunately, that is not possible. Either you select the cu...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to improve the search functionality of ...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
User Story
Currently, I have to follow the following steps for each device vendor:
Download the vendor's icon as a png (e.g. https://www.google.com/s2/f...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want the new Desktop App to show my favorite...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want the new PRTG desktop application to hav...
Tue, 10 Jun, 2025 at 4:24 PM
We updated PRTG on our old Server 2008 SP1 Server (non R2)
and now PRTG is not working anymore correctly because its needs .Net 4.7.2, but that is not available on Server 2008
What is the best way to get this working again, until we hav...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
Run the daily report and show the graph or data for past 7 day...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to have an easy and reliable way to bac...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG Admin I would like to use a native Sensor to monitor...
Tue, 10 Jun, 2025 at 4:24 PM
We have a router, a dvr and a passenger info system setup in a bus wich we monitor via prtg. But we just want to get a error warning when the bus is active.
We also have a ping sensor for the login system for the chauffeur.
We want to pa...
Tue, 10 Jun, 2025 at 4:24 PM
Our company will not use PRTG's Tickets, how do we turn this off?
Article Comments
At this time it's not possible to shut this off but you can disable users from receiving emails in the user settings. Under Setup->Us...
Tue, 10 Jun, 2025 at 4:24 PM
