kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi,
I´m testing the sw and I wonder if it would be possible to know how I could create a custom map (sunburst view) with differents donuts and in each donut only the esx and the vm´s.
Thanks in advance
Regards
Article Comments...
Tue, 10 Jun, 2025 at 3:57 PM
Hi
Is it possible to display a output of a SQL query in PRTG?
If the query "SELECT sqlserver_start_time FROM sys.dm_os_sys_info;" displays "2019-12-18 22:56:34.917". Would it be possible to display the same output in...
Tue, 10 Jun, 2025 at 3:57 PM
Is it possible to set up an auto-discovery without it automatically adding sensors? Tried setting up an empty device template, but didn't have any success.
Article Comments
Why would you do that, could you elaborate your us...
Tue, 10 Jun, 2025 at 3:57 PM
Dear colleagues,
Is it possible to detect a value from HTTP code:
HTTP GET http://ctp-ms-bs27:61280/ReservesCancellationMicroservice/healthcheck: 200 OK Output: {"PendingForCancelation":0,"UtcDateOfLastReceivedNonEmptyRespons...
Tue, 10 Jun, 2025 at 3:57 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to get informed when a sensor's val...
Tue, 10 Jun, 2025 at 3:57 PM
Dear, good afternoon we have a device that most of the sensors is via SNMP where they worked perfectly and according to the client there was no change in the equipment, the sensors work and then stop and then work again, getting several ale...
Tue, 10 Jun, 2025 at 3:57 PM
I found that 'Handles' and 'Threads' in Probe Health.
What does 'Handles' and 'Threads' mean in the Probe Health ?
And What is the recommended range for stable operation?
(Note that PRTG is running on Virt...
Tue, 10 Jun, 2025 at 3:57 PM
Hi guys,
I'm trying to get a detailed history of device statistics out of the PRTG API. I'm using this query to pull channel values by datetime:
/api/table.json?content=values&output=json&columns=datetime,value_,coverag...
Tue, 10 Jun, 2025 at 3:57 PM
I need to be able to run a sensor which shows the latency in milliseconds between two given switches. I don't need it to be fancy, the feedback from a PING sensor will be absolutely fine. I can then set thresholds against the millisecon...
Tue, 10 Jun, 2025 at 3:57 PM
How to monitoring BGP on Mikrotik Device?
Article Comments
Hi there,
There are no already defined sensors here.
Maybe this article helps to create the needed sensors on your own.
Kind regards,
Birk Guttmann, Tech...
Tue, 10 Jun, 2025 at 3:57 PM
I checked some devices and the imported system information but only some of System information are gathered ( Hardware, Software).
How does PRTG get 'System Information'?
Is it possible to collect by SNMP only without WMI?
What ...
Tue, 10 Jun, 2025 at 3:56 PM
what steps have been taken to add windows 10 or any operating systems and what we get results from.
which tools have been used for necessary in microsoft windows??
Article Comments
The following article has the basic steps out...
Tue, 10 Jun, 2025 at 3:56 PM
through prtg , how we have given solutions of particular device or sensor how wil shows and how to slove that issue from their status.
Article Comments
What kind of Sensor are we talking about and what specific error are you rec...
Tue, 10 Jun, 2025 at 3:56 PM
Hi,
I just give a try to PTRF network monitor. On my actual monitoring (nagios based), i modify a snmp sensor storage to give me an accurate value of OID storage.
1.3.6.1.2.1.25.2.3.1.5.1 = "640898972"
To have the correc...
Tue, 10 Jun, 2025 at 3:56 PM
Good morning.
I define in the core server a page.html with map that includes sound alerts.
Then I call this html in other computer in VPN to have visibility of the map all time.
I see the map and sensors, but when a sound sensor change to r...
Tue, 10 Jun, 2025 at 3:56 PM
I would like to make a waterfall graph on my maps if possible (not sure if that's the best name... it's what we called them in the Navy). Basically, I figured I would have to stack a couple of graphs together to get this to work, bu...
Tue, 10 Jun, 2025 at 3:56 PM
Hello,
I supervise acronis backups using the imap sensor. For one of my backups, it is done only once a month, on the last day of the month. Is it possible to do this type of planning?
Article Comments
Hello there,
And thank...
Tue, 10 Jun, 2025 at 3:56 PM
Hi,
when I run auto-discovery with template on Cisco WLC device (steps described here: How can I monitor a Cisco WLC deployment with PRTG? ), no sensors are discovered. Autodiscovery log (C:\ProgramData\Paessler\PRTG Network Monitor\Logs\...
Tue, 10 Jun, 2025 at 3:56 PM
Hi,
Trying to do something I've never done before and don't know much about.
I have a web api returning JSON (I believe) and I need to pull a value out of it for the temperature.
I have been poking around with the XML/REST se...
Tue, 10 Jun, 2025 at 3:56 PM
I need to relocate my existing PRTG server and have reviewed the migration article.
Before I deactivate my license to move it to my other server, will I be able to reactivate my license if I do not have active software maintenance?
...
Tue, 10 Jun, 2025 at 3:56 PM
Hi there,
How can i find out how many sensors in each interval i have?
Thanks a lot
Article Comments
Hey Hossein,
simply head to Setup > PRTG Status and check the Sensors By Interval section.
Here you can find all releva...
Tue, 10 Jun, 2025 at 3:56 PM
I have WMI sensors set on multiple servers. All are using inherited credentials. One DC is working fine with WMI, the other never gets a response after adding the sensor. All firewall settings are GPO set. I get the error
Connection could n...
Tue, 10 Jun, 2025 at 3:56 PM
Hi Guys,
I hope someone can help my by my Stubid question :-)
So I woud use the REST Custom Sensor to get data from Freifunk Node
the URL is https://map.ffrn.de/data/nodes.json
So I Create a Template with following entries:
{
&qu...
Tue, 10 Jun, 2025 at 3:56 PM
I installed PRTG with administrator privileges, and I checked that PRTG works normally.
But now, I can not use the administrator account due to security issues.
Therefore, only standard account can access the server where PRTG was install...
Tue, 10 Jun, 2025 at 3:56 PM
Let me know how 'port' sensor works.
What is a way to check port state? 'netstat' or 'telnet' command?
On what basis will port be checked whether 'open' or 'closed' in TCP session?
For example, ...
Tue, 10 Jun, 2025 at 3:56 PM
I'm using PRTG with cluster.
I found that the status of cluster kept on repeating 'disconnected' and 'connected'.
The cluster node has restarted the connection randomly on the cluster log in the cluster node(failove...
Tue, 10 Jun, 2025 at 3:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
We gave out servicedesk the ability to read-only our prtg moni...
Tue, 10 Jun, 2025 at 3:56 PM
Hi,
I’m completely new to PRTG and I’m trying to create the below without success. Could anyone offer some advise?
I have three separate groups (single server in 3 separate locations) containing multiple sensors.
The three nodes form...
Tue, 10 Jun, 2025 at 3:56 PM
Dear Colleagues,
I have 10 servers and i would like to summarize the number of successful logins with one sensors from my main probe and import them into a graph.
I have tried to add all of my servers into one JSon code but i couldn't g...
Tue, 10 Jun, 2025 at 3:56 PM
Hello,
I'd like to monitor a service of an AIX System. Does the current version of PRTG support AIX Systems for example via SSH?
Article Comments
Hi mw-twol,
PRTG has no native SSH Service Sensor at the moment. However, yo...
Tue, 10 Jun, 2025 at 3:56 PM
Hi Paessler Team,
Can I implement or configure PRTG network monitoring server on Linux? if yes then How to download and configure PRTG on linux RHEL or Centos.
Waiting for your response.
Regards,
Pravin Goud
Article Comments ...
Tue, 10 Jun, 2025 at 3:56 PM
Hello,
I am trying to query table.json via the API. Using Postman or curl my results look great.
https://x.y.z/api/table.json?content=devices&columns=device,host,tags&output=json&filter_tags=@tag(IOS,NXOS,DNOS,FTOS,FortiOS,E...
Tue, 10 Jun, 2025 at 3:56 PM
Hello,
I have some cisco devices and want to monitor them using PRTG. For Catalyst switch, I can add sensor using default Cisco template but for Nexus N7706 I can not add any sensors using Cisco default template, just found PING sensor.
...
Tue, 10 Jun, 2025 at 3:56 PM
Hello!
Just trying to understand logic of HP Proliant Server System Health sensor. It show status of several channels (like tempurature or power consumption) of iLo system, but it also looking into IML (Integrated Management Log) of serve...
Tue, 10 Jun, 2025 at 3:56 PM
as our old server no disk storage, so i need to migrate to new server.
Please tech me how to migrate the sensor and configuration to new server with different version
Article Comments
Hey lks0425,
Yes, old and new server ha...
Tue, 10 Jun, 2025 at 3:56 PM
Is it possible to create report for Traffic per ASN via sflow ?
Article Comments
Hi there,
I'm afraid that the sFlow sensors in PRTG do not support the ASN field. For a list of all possible filters, kindly take a look here...
Tue, 10 Jun, 2025 at 3:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to reset a sensor back to de...
Tue, 10 Jun, 2025 at 3:56 PM
I would like to create a MapObject, where I could display the data of all channels from a sensor and not just the primary. Just like the gauge object but without the gauges or the graph object but of cause without the graph.
For Example I...
Tue, 10 Jun, 2025 at 3:56 PM
Hi,
I'm trying to create a dynamic REST template for monitoring aspects of PowerDNS recursor. One of the metrics counts how long each thread has spent on queries - as threads are dynamic and vary depending on the machine I thought I&#...
Tue, 10 Jun, 2025 at 3:56 PM
Our challenge was to have several PRTG MAPs cycling through a TV in the IT room. We did not want to have just one static MAP at all.
In order to accomplish this - we created a simple HTML file with some JAVASCRIPT code that runs through ...
Tue, 10 Jun, 2025 at 3:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to have a sensor/a device de...
Tue, 10 Jun, 2025 at 3:56 PM
Hallo zusammen,
ich habe für unsere Cisco Switch-Umgebung einen automatischen Such Job aktiv, der unter anderem die Sensoren für Cisco System Health anlegt.
Die beiden Sensoren "System Health Andere" und "System Health Strö...
Tue, 10 Jun, 2025 at 3:56 PM
Been running this software for a little over a month now. This is the 3rd time I have accidentally deleted entire objects when I thought I was just deleting sensors.
In the management screen I highlighted a few sensors using the ctrl k...
Tue, 10 Jun, 2025 at 3:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to display the maximum chann...
Tue, 10 Jun, 2025 at 3:56 PM
I have GLC-SC-MMDs installed in a Cisco switch running 15.2(2)E5. I have another identical switch with the same version and same SFP modules. On one switch, PRTG detects the "other" sensors for the SNMP Cisco System Health group...
Tue, 10 Jun, 2025 at 3:56 PM
Hello everyone,
we're currently planning to setup a PRTG Server XL Instance with roughly 10.000 Sensors (Migrating from different solution), spanning over local and remote sites.
Our planned specs for the Core-Server currently:
Ph...
Tue, 10 Jun, 2025 at 3:56 PM
Need to move PRTG onto a new server and would like to go with 2016 core. Are there any steps which are different than the link below?
https://helpdesk.paessler.com/en/support/solutions/articles/7600006351113-how-can-i-move-migrate-my-prt...
Tue, 10 Jun, 2025 at 3:56 PM
Hi
This two sensor have error.
The WMI query does not return any results. The reason might be an issue with the host's WMI system. For more information, see https://helpdesk.paessler.com/en/support/solutions/articles/1093. (code: PE...
Tue, 10 Jun, 2025 at 3:56 PM
I am trying to monitor a site which has different nodes if you will. The data i receive from the site looks like this..
{
"ace" : {
"healthy" : true
},
"deadlocks" : {
"healthy" : tru...
Tue, 10 Jun, 2025 at 3:56 PM
I changed my password following this:
https://www.paessler.com/manuals/prtg/prtg_server_administrator
However now most of my sensors (all but Ping, HTTP, and RDP) are now in a down state with the following error (I added * for the User an...
Tue, 10 Jun, 2025 at 3:55 PM
Dear, good morning how can I automatically extract all the emails I registered in prtg to receive certain alert
Article Comments
Hello,
You may be able to use the PRTG API for this. You'll find all available API calls at ...
Tue, 10 Jun, 2025 at 3:55 PM
I have a perl script on a linux system that measures the sizes of various directories. The script is in /var/prtg/scriptsxml and is correctly found when adding a sensor.
PRTG runs the script without error, but the values returned are not ...
Tue, 10 Jun, 2025 at 3:55 PM
Hello everybody!
Can a upper error/warning limit be set to infinite since I only need a lower limit?
Use: a runtime/uptime sensor - the monitored device can run for quasi-infinite time. My measurement device which needs to warm up befor...
Tue, 10 Jun, 2025 at 3:55 PM
Does PRTG has an cloud app remote probe for Windows Nano Server?
I would like to use some sensors from a remote hosted nano server.
Article Comments
Hello,
It's possible to install a Remote Probe in a cloud. However Win...
Tue, 10 Jun, 2025 at 3:55 PM
I'm a new user and struggling to get my password to work. Using the guidance of special characters wasnt very clear, I only used recommended chars but couldnt get it to accept them reliably even after multiple validations. Narrowed my...
Tue, 10 Jun, 2025 at 3:55 PM
Is there something wrong with the HTTP and HTTPS cloud sensors today? All of ours went offline with the error message listed in title. Our PRTG installation is up to date.
Article Comments
Hi there,
It was an issue on our end....
Tue, 10 Jun, 2025 at 3:55 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
Currently there is no way to finetune the web interface and/or...
Tue, 10 Jun, 2025 at 3:55 PM
How can I create a report on tunnel up/down on cisco vpn head routers
Article Comments
Hello there,
Thanks for your KB thread. Can I check with you if you have already deploy the sensor to monitor the VPN status? If yes, you m...
Tue, 10 Jun, 2025 at 3:55 PM
Hello,
Through WMI i can see which software is installed on a system.
is it possible to create a report to see all installed software of all systems?
regards
Hans
Article Comments
Sorry, the system information tab cannot b...
Tue, 10 Jun, 2025 at 3:55 PM
I have some web services hosted on AWS and use cloud http sensor to monitor. Yesterday all cloud http sensors showed the same error message [Unexpected Cloud Error. (code: PE253)]
Http sensors for these host are normal at the same time
What...
Tue, 10 Jun, 2025 at 3:55 PM
I need to monitor a file. If the file exists and is less than 10 mins old. Then it should appear as down. My problem is that it does not use channel settings.
Article Comments
Hello Niels,
Thank you very much for your contact....
Tue, 10 Jun, 2025 at 3:55 PM
Hi
i have a bunch of cloud devices that i'd like to have monitored by PRTG.
They will alert e.g. when CPU/Mem/Disk threshold is reached.
I've implemented the push data sensor before.. and in all cases you need to create the se...
Tue, 10 Jun, 2025 at 3:55 PM
Hi,
Is it possible to automate the discovery process (with customizable scripts or using API) of the devices in the network in case the following limitations may apply:
1) the number of devices is too big for manual IP configuration (ev...
Tue, 10 Jun, 2025 at 3:55 PM
I'm trying to figure out what exactly this metric is. I have PRTG monitor net traffic from our company's router. I understand speed seems to be overall bandwidth, seeing as how this metric matches up to a bandwidth monitoring our IS...
Tue, 10 Jun, 2025 at 3:55 PM
In monitoring windows updates for servers, I would only like to see the number of days since last update (similar to the old sensor). I don't need to know how many updates of each type as updates are released monthly. Is there any way...
Tue, 10 Jun, 2025 at 3:55 PM
Hello, I wanted to ask if there is a way to migrate data from several PRTG server and consolidate them into one, we were thinking in change the licensing from several 2500 sensors servers into a much bigger one using the XL 1 license.
Tha...
Tue, 10 Jun, 2025 at 3:55 PM
Hi,
I have two queries. Kindly reply soon.
Q1. I would like to know "Are there any SNMP Sensors to monitor Oracle Database process and services available".
If there is, provide the list and how to use them.
Q2: Is it possibl...
Tue, 10 Jun, 2025 at 3:55 PM
I have about 30 workstations on a corporate LAN.
All I won't to do is find a work station who is flooding our internet connection at various times throughout the day.
I expect that a WMI based monitor will do this. I don't want t...
Tue, 10 Jun, 2025 at 3:55 PM
I'm setting up a datacenter and I want to have a system of LEDs that change colour according to the statuses of various devices on the network. For example, if a PRTG sensor detects something (eg. high temp) a certain LED changes from g...
Tue, 10 Jun, 2025 at 3:55 PM
How to send a document by mail ? The same manner before with Canon Solution Menu ? Thank you describe exactly the way to follow.
Article Comments
Hi,
Please describe your inquiry a bit more detailed, so that I can give you a s...
Tue, 10 Jun, 2025 at 3:55 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to use the PRTG webserver, o...
Tue, 10 Jun, 2025 at 3:55 PM
Hello,
i have a Powershell Script for the Serinus Alarmserver.
In Windows Powershell and ISE i'm able to run the sript with the following parameters:
.\myscript.ps1 my_user my_password myalarm_number mydescription_text
The sript is...
Tue, 10 Jun, 2025 at 3:55 PM
hi, the selected best answer in this post link below accomplishes what i need to do, however in the process (as with all auto discovery actions) many Ethernet interfaces are also added/auto-discovered (including ones i have deleted befor...
Tue, 10 Jun, 2025 at 3:55 PM
I've noticed recently that paused sensors aren't showing up in the management tab, when I've seen them before, at some point in the past. I'm guessing a bug was introduced that has made these not visible. Is there a way to f...
Tue, 10 Jun, 2025 at 3:55 PM
Not a problem exactly, but would like to kindly ask everyone to e-mail support at paessler and ask for offical support on Windows Server Core and also to vote this entry.
Article Comments
Hi,
Couldn't you add the GUI, inst...
Tue, 10 Jun, 2025 at 3:55 PM
Hi Everyone,
We have are currently reviewing our security groups in AD and are trying to allow users to login to PRTG who are a member of a group which is a member of a group in PRTG.
e.g. I am a member of the "Department - IT"...
Tue, 10 Jun, 2025 at 3:55 PM
hi,
i try to run a once-per-month report over my ssl certificates, where i want to get the latest value of "Days to Expiration".
in any setting of reported period i always end up in "Not enough monitoring data".
if i c...
Tue, 10 Jun, 2025 at 3:55 PM
Please where is the error?
XML: Junk after document element </channel> -- JSON: The returned JSON does not match the expected structure (No mapping for the Unicode character exists in the target multi-byte code page). (code: PE231)...
Tue, 10 Jun, 2025 at 3:55 PM
Hi
I need to export a device list of a specific group via API command, can someone remind me the command sintax?
thanks
Article Comments
Hi,
You can use the following API to generate the desired list:
http://api/table.c...
Tue, 10 Jun, 2025 at 3:55 PM
Hello there
We've created a small powershell script for retreiving a CSV file from M$ SNDS, and entering the data into PRTG.
'''
$url = "https://xxx"
$headers = 'channel','DateFrom','DateTo&...
Tue, 10 Jun, 2025 at 3:55 PM
If a Sensor or a complete Device, on a Virtual machine for example, has a loop of loose contact, a new connect and a loose contact over and over again - a message shower of Notifications up to 300 Mails per day are sent.
There is no way ...
Tue, 10 Jun, 2025 at 3:55 PM
i cant use notification option of sensor on my prtg
can any body help !
see my screenshot: https://i.imgur.com/hIcx1q4.png
Article Comments
Hello,
Apologies, but at this time, we do not support any version of PRTG older than ...
Tue, 10 Jun, 2025 at 3:55 PM
When I have a main site with PRTG core server and several remote probes, then internet becomes disconnected.
- Will the remote probe have some mail notification capabilities?
- Notifications only comes from core server?
- Can I see curren...
Tue, 10 Jun, 2025 at 3:55 PM
I need to perform an alert based on the decrease in the value of incoming data for the last 3 minutes.
I have a custom sensor that receives data about the number of incoming calls in PBX , and if the number of calls is less than 30% than ...
Tue, 10 Jun, 2025 at 3:55 PM
Hi,
We are using PRTG with a Mitel MiVB PBX.
We are getting alerts just fine when something on the system alarms such as SIP trunks failing which is fine but the information included in the email doesn't state what the issue is and ...
Tue, 10 Jun, 2025 at 3:55 PM
Dears .
Can i determine the peak time at Netflow sensor and what is the type of the traffic ??
i need percentage and the time that we have a peak time at netflow sensor ?
Can i get that ??
Thanks
Article Comments
Hi ther...
Tue, 10 Jun, 2025 at 3:55 PM
i doesn't seem to be possible to create custom field/properties for a device ?
- will that be something that's being considered
Scenario's adding server purchase date, warranty/carepack expiry date etc
And then be able to run ...
Tue, 10 Jun, 2025 at 3:55 PM
Hi there
I'm trying to monitor our Skype for Business Servers - without much luck though :( How can I get my script to be run on the remote server itself?
Script:
$query = Get-CsWindowsService RTCMEDSRV
[string]$result = $query....
Tue, 10 Jun, 2025 at 3:55 PM
Hallo zusammen,
ist es möglich, die Textgröße für Tabellen in Maps zu ändern, oder müsste ich dafür ein eigenes Mapobject erstellen?
Konkret geht es mir um das Objekt "Datentabellen" -> "Fehler-Sensoren". Auf eine...
Tue, 10 Jun, 2025 at 3:54 PM
Good Day PRTG-Afficionados,
For monitoring a remote Linux device I would need to use a remote probe (not mini probe) so that even when communication goes down the data keeps being collected. Installing a WIN10 PC is unfortunately impossi...
Tue, 10 Jun, 2025 at 3:54 PM
Hi,
I want to be able to stop notifications for the probe server when installing updates, what is the best way to achieve this?
Thanks
Article Comments
Hello,
PRTG isn't storing whether a notification has been sent fo...
Tue, 10 Jun, 2025 at 3:54 PM
With PRTG, is it possible to setup alerts for all interface if their traffic utilization exceeds a certain percentage?
For example if I have a router, and switches, I want to know if any of the interfaces are exceeding 80% utilization for...
Tue, 10 Jun, 2025 at 3:54 PM
I am looking for a sensor that is similar to the SNMP APC Hardware sensor.
Which other sensors also make sense in monitoring USPs?
Thanks a lot in advance!
Article Comments
Hello,
I'm afraid there are no native sensors ...
Tue, 10 Jun, 2025 at 3:54 PM
Hi friends..!! I hope your help please.
I have set up NetFlow V9, but i have a question:
How can i create a automated task for debugging collected data?
How can i monitore data link from my suppliers?
Thank you in advance for your s...
Tue, 10 Jun, 2025 at 3:54 PM
Hello,
I would like to monitor a Linux server to alert when no files fall within 24 hours within a specific folder, could you help?
Article Comments
Hello Jose,
Thank you for your post.
You can monitor smb shares on Linux ...
Tue, 10 Jun, 2025 at 3:54 PM
Hello,
we're using PRTG Network Monitoring for a small department of a company that is operating world wide. The department is a client of us. There are plenty Firewall Rules and separeted Networks.Therefore we need to monitor each PC w...
Tue, 10 Jun, 2025 at 3:54 PM
Hi @ all.
The problem or better the challenge isn't new but I try to implement a hardware monitoring for Fujitsu Server (Primergy's). It's a shame that paessler doesn't have sensors for it (why not??? does the oids are dif...
Tue, 10 Jun, 2025 at 3:54 PM
i was using SNMP Cisco ASA VPN Traffic sensor to monitor a connection and it was working, but suddenly the sensor is down
even though the VPN connection is working fine with no changes on the firewall or whats so ever
error:
There is no a...
Tue, 10 Jun, 2025 at 3:54 PM
Dears,
I have created some Maps with administrator account. Now when I create user with only read privilege they cant see the map if they see the map it is not active.
could you please provide how to give users access to the active maps...
Tue, 10 Jun, 2025 at 3:54 PM
I have got Netflow running on a Cisco ASA and have a remote probe to collect the data.
TCPView is showing that data is arriving from the ASA on the configured port and that it is then being sent on to the NSM server. When I view the NSM pa...
Tue, 10 Jun, 2025 at 3:54 PM
