kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I'm trying to configure PRTG's built-in syslog receiver. When I search for this sensor to add to the local probe device, it doesn't return a search result - it appears that this sensor isn't available. My understanding is t...
Tue, 10 Jun, 2025 at 3:53 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I would like to have the user name of the user...
Tue, 10 Jun, 2025 at 3:53 PM
Hi! When I'm deploying router device from previously created template, I'm having snmp bandwidth sensors on each port. But in my template there were a few senosrs on certain ports. What's wrong, I need a template with a few sens...
Tue, 10 Jun, 2025 at 3:53 PM
Ich möchte den zu verwendenden Port für die "Active Directory"-Abfragen vom PRTG-System zu den AD-Servern sicher auf "636" wissen.
Wo kann man diese Konfiguration einsehen?
Oder eben sogar den zu verwendenden Port von 38...
Tue, 10 Jun, 2025 at 3:53 PM
Hello,
After hours of Googling and with the few examples provided I could not implement the sensor to successfully keep track of associated clients to each AP in our environment. After trial and error and some of the examples I was able t...
Tue, 10 Jun, 2025 at 3:53 PM
Hello
is it possible to disable all credentials for the systems and leave only SNMP?
thanks!
Article Comments
Hi there,
You can configure or disable the credentials in the settings tab of each object (probe, group, devic...
Tue, 10 Jun, 2025 at 3:53 PM
Hello,
We got several servers with Self Signd certificates.
These Certificates have no root Authority and no revoked check.
how can i configure the "SSL Certificate Sensor" to not check these values ?
Greetings
Ronald
...
Tue, 10 Jun, 2025 at 3:53 PM
Hello,
We have an SMTP Virtual Server setup in IIS 6.0 Manager running on our Windows server that acts as our email relay to our hosted Exchange for printers and other scan to email devices.
I have tried the sensor Windows IIS 6.0 SMTP ...
Tue, 10 Jun, 2025 at 3:53 PM
Can prtg monitor Linux service like email services .
Article Comments
Hello,
There are different ways to monitor specific linux services:
1) Use a according shell script to check the status of that service on the machine y...
Tue, 10 Jun, 2025 at 3:53 PM
HI where can i find the specific details of the sensor definitions and what exactly they are monitoring and how they are doing it ?
is there some official documentation somewhere?
Article Comments
Hi
Is this what you are lookin...
Tue, 10 Jun, 2025 at 3:53 PM
I have a powershell script that returns the current value for the default AWS LaunchTemplate for some specific templates. Essentially the script when run checks for the latest base version of Windows Server 2019 Base & then creates a ne...
Tue, 10 Jun, 2025 at 3:53 PM
How can I change the map object of a traffic light , if the status is "acknowledged" to show a red allarm status anyway ?
At the moment with the status "acknowledged" the traffic light does not show anything.
Art...
Tue, 10 Jun, 2025 at 3:53 PM
Hi,
We are looking for a sensor that can measure the the total loading size of a full web site in kilobytes/megabytes. Is there such a sensor? Please let us know if you need more detail.
Thanks,
Silvan
Article Comments
You c...
Tue, 10 Jun, 2025 at 3:53 PM
Is there a way to monitor XenMobile in PRTG?
Article Comments
Hi,
Please check if the vendor offers any MIB files that you can import with our MIB-Importer.
If so, you can monitor the target with the SNMP Library Sensor.}
He...
Tue, 10 Jun, 2025 at 3:53 PM
I have a problem with the sensor MS SQL v2. I create the sensor to test it in action on my PC to test the sensor . On the computer installed Microsoft SQL SERVER 2012 Express. When i run the sensor then I displayed the following error: Can...
Tue, 10 Jun, 2025 at 3:53 PM
I've had PRTG running for a while and suddenly I'm getting a few servers that report the error below. On the servers that fail, all WMI probes fail. It's not all servers that fail though, most are ok.
A reboot of the server do...
Tue, 10 Jun, 2025 at 3:53 PM
I have read the post at https://helpdesk.paessler.com/en/support/solutions/articles/7600006351113-how-can-i-move-migrate-my-prtg-installation-to-another-computer
But I am wondering if there is a way to just migrate the devices and the sen...
Tue, 10 Jun, 2025 at 3:53 PM
I'm using PRTG with standalone mode but going to configure a cluster mode.
So I'm going to copy the primary running DB to the failover node's server in advance.
Is it right way that configuring the cluster after copying the ...
Tue, 10 Jun, 2025 at 3:53 PM
The value of "Traffic In" and "Traffic Out" represents the up and down bandwidth?
how can I get the upload and download speed?
Article Comments
This is the description of the values polled by the Traffic In a...
Tue, 10 Jun, 2025 at 3:53 PM
Good morning,
Question, If access points go offline, we will receive e-mails
we would like PRTG to make a sensor when an access point goes offline, and report it ready when it comes online
We receive the following emails:
Node IP 17...
Tue, 10 Jun, 2025 at 3:53 PM
Hi all!
For my system, there is a need to add icons similar to the standard ones (OK, Error, Warning, etc.).
I tried these recommendations:
https://helpdesk.paessler.com/en/support/solutions/articles/52723
https://helpdesk.paessler...
Tue, 10 Jun, 2025 at 3:53 PM
Hello,
all of my three baramundi Custom Sensors throw following errors:
XML: Das zurückgelieferte XML entspricht nicht dem erwarteten Schema. (Code: PE233) -- JSON: Das zurückgelieferte JSON entspricht nicht der erwarteten Struktur (No ...
Tue, 10 Jun, 2025 at 3:53 PM
Is it possible to create a syslog sensor to receive syslog messages from just one specific device? If so, how do I go about doing that?
Article Comments
Hello there,
Thank you for your post.
If you want that the Syslog Recei...
Tue, 10 Jun, 2025 at 3:53 PM
I am looking for the way in which the session does not close.
I am using a TV to show a map of PRTG and from time to time the session closes. Although, I made the map public, it closes. There is a way to solve this that is not "Keeps t...
Tue, 10 Jun, 2025 at 3:53 PM
I have over 900 switches in a core, distribution, access layer configuration. I would like to deploy Netflow on my network. Do I deploy Netflow out to all of my switches or just to the core? If I deploy to more than just the core, do I n...
Tue, 10 Jun, 2025 at 3:53 PM
Hallo,
die Suchfunktion nach Tags funktioniert leider nicht richtig.
Beispiel:
Ein Sensor vererbt den Gerätetag: "Kamera" und besitzt als eigenen Sensortag "Deviceid".
Wenn ich nun nach:"Kamera Deviceid" ...
Tue, 10 Jun, 2025 at 3:53 PM
We have our PRTG installation set up more or less as we want it now with all the sensors etc, but we want to now fine tune the alerting etc.
One of the things we want to do is to set specific limits for lower and warning values for things...
Tue, 10 Jun, 2025 at 3:53 PM
Please tell me how you can get the IP address of the proxy server and display it in the monitoring. I'm trying to do it using json, but it doesn't work.
https://api.ipify.org/?format=json
Article Comments
Hello there,
...
Tue, 10 Jun, 2025 at 3:53 PM
Would be nice to have a warning if a object is linked to a MAP before one deletes it.
That way I know which maps are affected and can edit that map afterwards.....
Article Comments
Hi Erik,
Thanks for your feedback. Therefor...
Tue, 10 Jun, 2025 at 3:53 PM
Hi,
We manage 100s of devices that have been grouped (and sub-grouped) depending on location.
I would like to trigger an e-mail when one of the devices' uptime drops below the threshold (24hr).
This will then raise a ticket, for n...
Tue, 10 Jun, 2025 at 3:53 PM
Hello, we are trying to implement Execute HTTP action feature on notifications, but we're not able to do so.
If we execute call from powershell with invoke-webrequest everything works fine, but from prtg, we're getting errors.
...
Tue, 10 Jun, 2025 at 3:53 PM
Hello,
following situation, we have a sensor monitoring workorders in Dynamics online, giving us a number of workorders back that are overdue/in error, let say as an example 5 orders.
Our team have a look at the offending workorders, an...
Tue, 10 Jun, 2025 at 3:53 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG and SCOM user, I want to have a single point of view...
Tue, 10 Jun, 2025 at 3:53 PM
Now the tag filter only works on the data tables objects. It would be most helpfull if it woould apply to all maps objects (for example static icons). Is there a plan to implement this?
Article Comments
Tue, 10 Jun, 2025 at 3:53 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want the tag filter to apply to all maps obj...
Tue, 10 Jun, 2025 at 3:53 PM
I played a little bit with the QoS-Probes to measure UDP thoughput (VoIP).
There are two probes. One is sending UDP-pakets to a remote probe (oneWay) which analyses the results.
The other is sending the UDP-Pakets t oa remote probe and exp...
Tue, 10 Jun, 2025 at 3:53 PM
i want monitor with particular folder or what i get the results from
Article Comments
Hi there,
you can use our Folder Sensor. The Folder sensor monitors a folder using server message block (SMB). You can monitor file changes ...
Tue, 10 Jun, 2025 at 3:53 PM
Hello all,
I'm feeling pretty dumb asking this, but I'm not having any luck building it out. Has anyone created a custom monitor to monitor Azure security events? I'd like to pull a dashboard together monitoring events (ult...
Tue, 10 Jun, 2025 at 3:53 PM
where I find the logs about the system, for example I want to check when PRTG stopped working where I see the log
Article Comments
Hello Rafael,
Logs can be found on the core server system under YourDrive\ProgramData\Paessler\...
Tue, 10 Jun, 2025 at 3:52 PM
Hello,
I want to use the EXE/Script Sensor in the security context of the parent device for a Powershell Script, but keep receiving the error 0x522 "A required privilege is not held by client".
The way PRTG is set up within our...
Tue, 10 Jun, 2025 at 3:52 PM
This requires a bit of a history lesson:
My network has 2 Cisco routers (one is a 4331, the other is a 2921) that forwards SIP traffic to our service provider. One handles inbound SIP; the other outbound SIP. We control the internal route...
Tue, 10 Jun, 2025 at 3:52 PM
Hello, can we deactivate the automatic network search function?
Article Comments
Hi there,
Yes, that's possible. Please check out this link.
I hope this helps. :)
Kind regards,
Andreas Günther
Tech Support, Paessle...
Tue, 10 Jun, 2025 at 3:52 PM
When determining Unusual State, PRTG checks 'hourly average for this hour of weekday' or '24h average for this weekday'.
However, how is this average calculated? How long a time-period is being used for calculating the avera...
Tue, 10 Jun, 2025 at 3:52 PM
A powershell script in PRTG is permanently throwing the following exception:
XML: Das zurückgelieferte XML entspricht nicht dem erwarteten Schema. (Code: PE233) -- JSON: Das zurückgelieferte JSON entspricht nicht der erwarteten Struktur ...
Tue, 10 Jun, 2025 at 3:52 PM
I'm using cURL to do an api call but receive <HTML><BODY><B>Unauthorized</B></BODY></HTML> as a return. I've tried both password and passhash in the url but both get the same results. If I use the...
Tue, 10 Jun, 2025 at 3:52 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want be able to pick two or more time period...
Tue, 10 Jun, 2025 at 3:52 PM
I want to send an SNMP-trap to prtg with a value of 42. PRTG should go to warning when getting it. The trap can be seen in messages, but there is no action done (getting yellow) from PRTG.
This is what I have done:
Create a PRTG-Sensor ...
Tue, 10 Jun, 2025 at 3:52 PM
When I configure HTTP Transaction sensor to GET the URL:
http://example.com/hash?files=/data/0730a418-fa84-4a4a-b7cc-6b3
It translates it t:
http://example.com/hash?files%3D%2Fdata%2F0730a418-fa84-4a4a-b7cc-6b3
which my receiving part ca...
Tue, 10 Jun, 2025 at 3:52 PM
Morning, Is there a windows sensor allowing to trace the logs of a specific user on a server. I tried with the "WMI Event Log" sensor, but I did not get the desired result. thank you for your help
Article Comments
Hell...
Tue, 10 Jun, 2025 at 3:52 PM
I am testing a login of a webpage which acts differently in different browsers.
Which browser does PRTG use?
Article Comments
Hi there,
In this case consider using the HTTP Full Web Page Sensor instead. In this sensor's Se...
Tue, 10 Jun, 2025 at 3:52 PM
I am used to monitoring my network with the dude. One thing I really like about it is the ability to see live traffic displayed on links between devices. In PRTG, is there an element that can me modified to show something similar? So far I ...
Tue, 10 Jun, 2025 at 3:52 PM
For normal stacks there is a solution to monitor the members with their state and role:
https://helpdesk.paessler.com/en/support/solutions/articles/760000635111133-how-can-i-get-prtg-to-recognize-cisco-switches-in-stack-that-utilize-only-1-...
Tue, 10 Jun, 2025 at 3:52 PM
Hello
1) I am getting ID of Sensor which are down
api/table.json?content=sensors&columns=objid,type&filter_status=5
2) And now i need to get IP adres (host) of Device, how can i achieve it?
I dont see any way how to filter d...
Tue, 10 Jun, 2025 at 3:52 PM
I will be using many WMI sensors and the guide suggests I do not go over 100 wmi sensors or performance will be poor on core server.
Article Comments
Hello,
Thank you for contacting us,
The Remote Probes do not require any a...
Tue, 10 Jun, 2025 at 3:52 PM
We are running a mysql sensor on a linux db server to track our slave status.
We are setting up the sensor on a upgraded db server and are receiving an error : "Authentication method 'mysql_clear_password' not supported by ...
Tue, 10 Jun, 2025 at 3:52 PM
Hi Support,
I'm looking to purchase the PRTG Network Monitor, but I have a question. I stumbled upon a question from 3 years ago, where one of your customers was asking about reports generated from PRTG. In particular I'm talking ...
Tue, 10 Jun, 2025 at 3:47 PM
As the maximum number of xml file is limited to 500, I tried to export device list to an xml file but it was not a complete list.
The total quantity of device is around 700.
How can I export the full list of device to a file at a time? ...
Tue, 10 Jun, 2025 at 3:47 PM
I want to have a notification when one of our Citrix VM's goes down during the day,
Every night these VM's restart and get a fresh VM, but i dont want to get spammed with these messages/alerts in the morning,
Is there a way to only...
Tue, 10 Jun, 2025 at 3:47 PM
Hello,
I am using PRTG version 7.2.5.5114 and I want to insert a link to the sensor in the notification email from the server.
In the email setup, I have configured the insertion of the link to the sensor by adding "%homesensor.htm?id=...
Tue, 10 Jun, 2025 at 3:47 PM
Hi,
We have a workflow where users are copying files to a shared folder on Server A and these files are automatically copied to Server B using a service/process on Server A. So the users drop the files on Server A and eventually they will...
Tue, 10 Jun, 2025 at 3:47 PM
Hi,
Is see the WMI Windows Version sensor has been deprecated. (https://www.paessler.com/manuals/prtg/wmi_windows_version_sensor)
Is there some native sensor we can use to monitor this instead?
I see there are third party sensors for ...
Tue, 10 Jun, 2025 at 3:47 PM
Hey guys,
I got a strange problem with our PRTG installation.
When I start the update, PRTG shutdown and then tries to restart. But the startup fails and never comes to an end. To end the the failed update I have to manually restart the...
Tue, 10 Jun, 2025 at 3:47 PM
I would like to display the max. and min. values for 3 channels in report. However, the default setting display the record of primary channel only. Can I set the multiple primary channels within 1 sensor or any alternative method?
Now: Tr...
Tue, 10 Jun, 2025 at 3:47 PM
Hi Support,
I have two questions about the Cloud Sensors that are used to monitor a specific device from the WAN. My questions are:
1) If I purchase PRTG with only 12 months support, do I still get to keep the Cloud Sensors after the Supp...
Tue, 10 Jun, 2025 at 3:47 PM
Good morning All,
I was unable to find an relevant information about if there is a time frame already for how long windows 2012 R2 will be supported.
If anyone can please provide some information regarding this topic.
Kind Regards, ...
Tue, 10 Jun, 2025 at 3:47 PM
I would like to reverse the alert conditions on a sensor in our environment. Can that be done?
Here's the situation:
I have a Meraki wireless access point plugged into a Cisco switch in our datacenter. It is to provide WiFi while tech...
Tue, 10 Jun, 2025 at 3:47 PM
help to doc or link to update probe manaul if get stucked after version upgrade.
Article Comments
Hi there,
Do I understand you correctly that you need assistance with installing an update to a Remote Probe that requires a man...
Tue, 10 Jun, 2025 at 3:47 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I would like the ability to add a line to a ma...
Tue, 10 Jun, 2025 at 3:47 PM
Hi
I'm wondering if anyone could help me. I've been using PRTG to monitor printers where I work for a little while now. And it's great (Better than getting emails constantly from Papercut)
However I've come across an iss...
Tue, 10 Jun, 2025 at 3:47 PM
Hello,
We would like to build the following:
Our administrator for printers is registered in PRTG. All of our printers are monitored in PRTG as well and have the tag "printer".
What we want is that when "SNMP Printer&q...
Tue, 10 Jun, 2025 at 3:47 PM
Is there a tag I can add to my url query that filters the output to specfic channels ID of a probe.
/api/table.json?content=channels&output=json&columns=name,lastvalue_&id=54907&
...this gives several channels number 1-6...
Tue, 10 Jun, 2025 at 3:47 PM
I want to monitor how much my Consolidated Billing AWS infrastructure costs with PRTG. How can I do this?
Article Comments
Important notice: As of PRTG 20.1.56, you can use the native AWS Cost sensor to monitor the costs of an...
Tue, 10 Jun, 2025 at 3:47 PM
Hallo,
bei der Überwachung unserer AS400 Partionen per SNMP treten vereinzelnd Aussetzer auf.
In diesen Fällen gibt für die Systemlaufzeit und Disk Free folgenden Rückgabewert: Generic Error (SNMP-Fehler # 5).
Das Problem betrifft nicht...
Tue, 10 Jun, 2025 at 3:47 PM
Hello. I use PRTG to monitor my vmware cluster.
Every day the auto discovery feature (using the vmware esxi / vcenter template) runs against the cluster searching for new VMs and so on -> everything works fine.
Every time the discove...
Tue, 10 Jun, 2025 at 3:47 PM
I need to capture the results of Microsoft-Windows-Diagnostics-Performance Event 100. I want the last occurrence of the event. This will give us the boot time for the system.
Is this possible with WMI? Or how would it be implemented as a...
Tue, 10 Jun, 2025 at 3:47 PM
As a notification I want to activate an external device like a buzzer or a light switch.
How can I do that?
Article Comments
Introducing the support of 2 more Cleware devices:
Relais
The Relais allows you to control up to ...
Tue, 10 Jun, 2025 at 3:47 PM
is it possible to switch from an online License?
We have activated our product using an online license and the system has internet access at the moment.
We want to cut the system from the internet.
Is it possible to switch the license to ...
Tue, 10 Jun, 2025 at 3:47 PM
Their needs to be a configuration option to change the colour of sensors. At the moment, those of us who are red-green colourblind like myself find it difficult to differentiate between the orange and green. The ability to tweak those colou...
Tue, 10 Jun, 2025 at 3:47 PM
Hallo. Ich bekomme bekam folgende meldung :
Ticket #343: Fehler beim Senden von SMS
Erneut geöffnet von PRTG System Administrator
Aktuelle Anmerkungen:
Fehler beim Versenden von "SMS": Nummer=+XXXXXX, Nachricht=Failed to est...
Tue, 10 Jun, 2025 at 3:47 PM
Hello,
I'm trying to use the API but since it is on a different domain than the webapp that is making the javascript Ajax calls I run into CORS (Cross Origin Resource Sharing) errors. So I wanted to set the http response header Access-...
Tue, 10 Jun, 2025 at 3:46 PM
Hi, I would monitor temperature on a Aruba (HP Procurve) switch.
I found the correct OIDS, but there is a problem:
SnmpWalk.exe -r:192.168.1.1 -c:"public" -os:1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.3
SnmpWalk v1.01 - Copyright (C) 2...
Tue, 10 Jun, 2025 at 3:46 PM
It is possible to restart a core server on cluster master node in 'Administrative Tools'.
But it is not possible for cluster failover node.
'Restart PRTG Core Server Service' button is valid for only master node.
How ca...
Tue, 10 Jun, 2025 at 3:46 PM
It would be great if the notifications for multiple selected sensors could be set at once (similar to edit the sensor settings for multiple selected sensors).
Article Comments
Dear Babylon6,
the multi-edit option for the setti...
Tue, 10 Jun, 2025 at 3:46 PM
Hello,
I am currently trying to monitor a file via a powershell script in other domain. It's a forrest where all domains are trusted.
The Probe is located in domain A which can execute the script and can fetch the file on servers ...
Tue, 10 Jun, 2025 at 3:46 PM
Let's say I have a switch and I have attached a ping sensor to it that is sending pings say every 10 seconds. During the day while people are in the office, it is configured to go into error state right away once it doesn't receive...
Tue, 10 Jun, 2025 at 3:46 PM
Hi there,
We are using PRTG version 20.1.55.1775. I would like to add the Geo Map Globe to a PRTG map. It comes with a 'dark theme' I would like to have it light and have the background color white instead of black. Is there a way...
Tue, 10 Jun, 2025 at 3:46 PM
I've written the following script to monitor the temperature of my Raspberry PI CPU:
tempc=$(vcgencmd measure_temp | egrep -o '[0-9]*\.[0-9]*')
tempf=$(echo "scale=2; 1.8 *$tempc + 32" | bc)
printf 0:"$tempf&quo...
Tue, 10 Jun, 2025 at 3:46 PM
Hi Team,
We have 2 datacenters in our environment. We have 1 server per Datacenter which are part of the 2 node cluster in PRTG. we are moving servers from one DC to another and will be changing the IP. We would need assistance from your...
Tue, 10 Jun, 2025 at 3:46 PM
PRTG can do specific TCP port auto disvocry ?
I would like to monitoring Tomcat using PRTG
-Monitor TCP Port 8009 (Ignore Response
I was TCP 8009 Port using a device that monitors and made ??a template.
(Create Device => Add Sensor P...
Tue, 10 Jun, 2025 at 3:46 PM
Hi all,
I'd like to monitor Citrix ICA Session bandwidth and I'm able to get it with PerfCounter Custom.
Citrix provides the information as bps, which unit do I need to set in PerfCounter Custom after :: in order to get the value sc...
Tue, 10 Jun, 2025 at 3:46 PM
Hi
I am configuring the sending of SMS in the PRTG but the provider that I have that is CLARO sent me some data that I do not know where to place, what information should I ask the provider.
they tell me about MEC through WS, integratio...
Tue, 10 Jun, 2025 at 3:46 PM
Hallo zusammen
Ich möchte eine eigene SNMP-Bibliothek erstellen. Dies sollte ja ohne Probleme über den MIB-Importer möglich sein. Dafür bräuchte ich aber noch die dementsprechenden OIDs, um die Daten unserer Xerox Drucker auszulesen.
Fü...
Tue, 10 Jun, 2025 at 3:46 PM
I would like to create a map but without the white background in the tables or graphs...
Is it possible to make the background transparent or remove it?
Article Comments
Hi there,
I'm afraid that the graphs are pre-rendere...
Tue, 10 Jun, 2025 at 3:46 PM
I use a script to monitor windows scheduling tasks, on several clients, but on one not working, follow the sensors log
The sensor always returns with the following message
"
Task '\ Carga_Profarma_Finnet' not found on host 17...
Tue, 10 Jun, 2025 at 3:46 PM
I use the SNMP sensor. I read data from this OID 1.3.6.1.2.1.43.5.1.1.17.1 (result = VCF8Y68025)
It is necessary that the received data be written to the value, but since it is an Octetstring, the sensor displays a message with the received...
Tue, 10 Jun, 2025 at 3:46 PM
Hello,
Is it possible to create a sensor in Unix, thanks to a script ?
Thanks.
Article Comments
Hi there,
PRTG offer several default sensors for Linux devices and it's also possible to create custom ones. A full lis...
Tue, 10 Jun, 2025 at 3:46 PM
Dear all,
We have the prtg on large screens here in the office and we are just showing the alarm section,
We all see the following alarm : 1 # (Updates (Unclassified) Missing) is above the warning limit of 0.20 # in Updates (Unclas...
Tue, 10 Jun, 2025 at 3:46 PM
Hello,
We have same problems with multiples sensors after update in 16.1.21.1692 version:
- 80041017: The query was not syntactically valid.
- WMI: 80041017: The query was not syntactically valid.- Remarque : la version du système d&#...
Tue, 10 Jun, 2025 at 3:46 PM
Hello,
Does anyone know this error? I cant find any information.
I have 2 swtiches with the same configuration regarding snmp.
Only one works with PRTG Netwok Monitor program.
The one who doesnt, i already tested with Paessler SNMP ...
Tue, 10 Jun, 2025 at 3:46 PM
At the moment it could be both unuseful and misleading if your high-impacting sensors are
actually paused.
What do i need to know that 10,000 paused sensors have a strong impact on system performance?
This overview should just list ac...
Tue, 10 Jun, 2025 at 3:46 PM
