kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi
Is it possible to schedule a one time maintenance windows with the RESTful API?
I cannot see any object manipulation command to do this.
It not, this would make a nice addition to your wishlist.
Thanks,
Jon
Article Comments
...
Tue, 10 Jun, 2025 at 2:51 PM
Hello Paessler, Some feedback about the MQTT_Sensors.
Cosmetic Question: MQTT Roundtrip-Sensor:
It looks like the Sensor is changing the Topic sometimes. Is this some obfusation, that no other MQTT-Device can hijack that and disturb th...
Tue, 10 Jun, 2025 at 2:51 PM
Can you create an RSS feed of current alarms??
Article Comments
Hi,
I'm afraid this is not possible. Sorry.
Best regards
Oct, 2012 - Permalink
Hi Mark,
I have created an application that is able to produce curren...
Tue, 10 Jun, 2025 at 2:51 PM
I have a Cisco router with a dual-stack setup. The majority of my traffic is Ipv4 but some is IPv6. I am sending all the data to PRTG via NetFlow v9. I would like to separate the traffic by IPv4 and IPv6 so that I can determine my usage sta...
Tue, 10 Jun, 2025 at 2:51 PM
Hi,
We are trying to monitorize some sensors that retrieve the temperature from a room via Modbus TCP and already have mapped all directions and port so we can connect succesfully. The thing is, that we are able to retrieve the informati...
Tue, 10 Jun, 2025 at 2:51 PM
Hi
I want to measure multicast traffic in/out throughput so that i can see how much bandwidth it's taking.
Thanks!
Article Comments
Hello Muhammad,
Thank you very much for your contact.
Unicast and Multicast are regu...
Tue, 10 Jun, 2025 at 2:51 PM
We have had a limited episode of Ransomware and we would like to know if there are any sensors that can be used to detect anomalous behavior: we thought about using the Business Process Sensor to define certain conditions such as if there i...
Tue, 10 Jun, 2025 at 2:51 PM
Hi.
I would like to use a PRTG sensor that can monitor the time when emails are NOT received in a box, with a certain subject.
Basically we have an IT service (Barracuda Cloud) that sends us emails with a specific subject.
It is a critical ...
Tue, 10 Jun, 2025 at 2:51 PM
Hi,
Anyone has any experience with getting ticket info from freshcerice?
We want to have a number of unassigned tickets on our prtg dashboard.
Thanks in advance.
Article Comments
Hello,
Thank you for your post.
You could...
Tue, 10 Jun, 2025 at 2:51 PM
Hi all,
Newbie to PRTG so apologies if the questions seems trivial to you.
I have created a Library for (example) SQL Servers.
I want to adjust all C: OS drive to Warning Limit of 5GB and Error Limit of 2GB
Want to set non- OS drive War...
Tue, 10 Jun, 2025 at 2:51 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to use %tags within my notifications.
...
Tue, 10 Jun, 2025 at 2:51 PM
Hi
sadly, you change frequently the Sensor type after an Update and our current sensors are not working anymore.
Is there a way to change\replace the Sensor type easily from the old to the new Version without re-create all Sensors and\or...
Tue, 10 Jun, 2025 at 2:51 PM
We are synchronizing the Alarms from PRTG with ServiceNow using the Servicenow connector.
After a sustained outage, we are seeing a massive influx of hundreds of thousands of alarms having sync across from PRTG to Serivcenow.
is it poss...
Tue, 10 Jun, 2025 at 2:51 PM
Hello everyone,
we are trying to improve our monitoring process by utilizing the Priority of Devices and Sensors.
Being a big international company we have many that access our PRTG System so we want to make sure, everyone follows our g...
Tue, 10 Jun, 2025 at 2:51 PM
Hello all,
I am having trouble finding the right template for a Custom REST Sensor.
I get a JSON response in the following format from an interface:
[
{
"server": "localhost",
"username":"\\\\localho...
Tue, 10 Jun, 2025 at 2:51 PM
Hi, I got this message as error: XML: The returned XML does not match the expected schema. (code: PE233) -- JSON: The returned JSON does not match the expected structure ('0.1055' is not a valid integer value). (code: PE231)
That...
Tue, 10 Jun, 2025 at 2:51 PM
My PRTG server is showing Local probe Disconnected message.
I've already tried with NoMacScan registry modification, but with no results.
The service PRTG Probe Service hungs in stopping state
How can y solve it?
Thanks,
Regar...
Tue, 10 Jun, 2025 at 2:51 PM
I've looked at both Business Process and Sensor Factory Sensors. Neither appears to work for what I need.
I have a group of several devices (Access Points) for our Local Probe, and a similar group of devices for one of our Remote Prob...
Tue, 10 Jun, 2025 at 2:51 PM
I am trying to set a range for a device that returns the values in a negative format here is the lookup so far it keeps returning the error "undefined value returned -520"
<?xml version="1.0" encoding="UTF-8&q...
Tue, 10 Jun, 2025 at 2:51 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
User story
As a PRTG user, I want PRTG to be more secure
Details of user story
I have proposed using PRTG as a replacement to Solarwinds Orion NPM. My securi...
Tue, 10 Jun, 2025 at 2:51 PM
Hello,
is it possible to stop a report that has already been started? because too many sensors were selected due to an incorrect configuration.
Article Comments
Hello Michel,
Thank you for your message.
Regarding the gener...
Tue, 10 Jun, 2025 at 2:51 PM
Hello,
I have a remote "server" (basically a converted desktop) whose power consumption I'd like to measure and keep track of.
Do you know of any smart socket that has power consumption tracking that can be imported into P...
Tue, 10 Jun, 2025 at 2:51 PM
Hello,
In my environment I have more then 300 sensor, some of them are paused because I reached the sensor limit.
I want to pause one of them and to play another.
It is a syslog sensor it say Paused "(exceeds group sensor limit)"...
Tue, 10 Jun, 2025 at 2:51 PM
1)
ADO SQL v2 sensor: add the possibility to edit/add channels after creation and other usability issues
Problem: we use a single ADO SQL v2 sensor dedicated to monitor some values using ODBC regarding some counters in our ERP business sy...
Tue, 10 Jun, 2025 at 2:51 PM
Hello Paessler support,
I have configured audio alarm when a sensor down successfully in PRTG Window applicartion. However, the audio alarm just plays one time around 2 seconds. IMO, it should be better if the audio alarm play continuousl...
Tue, 10 Jun, 2025 at 2:51 PM
User story
As a PRTG Admin, I want ability to authenticate to PRTG via PingFederate solution from Ping Identity SSO provider.
Details of user story
Currently PRTG only supports single SSO provider – MS Azure AD. This feature request i...
Tue, 10 Jun, 2025 at 2:51 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
I need an easier way to clear the historical data for one or m...
Tue, 10 Jun, 2025 at 2:51 PM
Trying to find a way to export all devices by name with all sensors for each device in a CSV. So we can audit some 1200 devices and over 20k sensors to make sure each device as the appropriate ones.
Article Comments
Hello,
Tha...
Tue, 10 Jun, 2025 at 2:51 PM
Today, if you clone a sensor (e.g. from the management view of the device tree), all channels from the cloned sensor get copied over too. This can result in erroneous channels on the new copy.
For example, if I create a CPU load sensor on...
Tue, 10 Jun, 2025 at 2:51 PM
After a fresh install of the last Version the prtg core Server didn's start.
FIRST MESSAGE BOX:
Please wait until PRTG's web Server is running...
Connecting to http://127.0.0.1/group.htm?id=0&tabid=1
failed...: Socket Error # ...
Tue, 10 Jun, 2025 at 2:51 PM
Has anyone got webhooks to work? I see the prtg notifications under the my outlook groups but not being sent to the Teams channel.
Article Comments
Hello,
You'll find articles on how to configure Teams notification here: ...
Tue, 10 Jun, 2025 at 2:51 PM
We use Active Directory integration. One group who all share the same AD role have the PRTG admins in it, but also a large number of other users. I have not been able to find a way to make sure the Admin users still have Admin rights whil...
Tue, 10 Jun, 2025 at 2:50 PM
Hello,
I have an licensed PRTG-Server working in two different networks on the same network interface.
I am trying to get informations about an older HP-UPS via SNMP v1.
The device is reachable via PING.
The SNMP-community/port on the S...
Tue, 10 Jun, 2025 at 2:50 PM
How can I disable SMS alerts?
Article Comments
Hello,
Thanks for contacting us.
You can disable the SMS alerts by pausing the Notification Template. You can go to Setup > Account Settings > Notification Templates.
In h...
Tue, 10 Jun, 2025 at 2:50 PM
Hi,
As part of my daily checks I need to record the disk space on multiple servers.
Is there a way to create a daily email notification that would display the disk space on multiple servers in one email notification.
I know we can cre...
Tue, 10 Jun, 2025 at 2:50 PM
I have a Paessler PRTG Enterprise Monitor subscription license and I run my PRTG server installations offline. I am required to regularly send screenshots of the PRTG Status pages of my PRTG servers to Paessler.
How do I generate these sc...
Tue, 10 Jun, 2025 at 2:50 PM
Hello, i create a new ssl certificate sensor on a virtual Machine but it sensor not the right certificate.
I understand that i need to use Sni but what i need to right there. Where i can see it on my certificate to enter to this row?
...
Tue, 10 Jun, 2025 at 2:50 PM
I run PRTG on a remote server with a static IP, so if I enter the IP in my browser I end up there.
Since I set up a dns record to access the site, and would rather not have random people end up there, I want to make it impossible to reach f...
Tue, 10 Jun, 2025 at 2:50 PM
I'm trying to add the SNMP Printer sensor to monitor the toner level for our Xerox printer, but I'm getting this error:
"Too Big. It might help to go to the device settings, "SNMP Compatibility Options" and switch &qu...
Tue, 10 Jun, 2025 at 2:50 PM
Hi. Please tell me if it is possible to use two script files in notifications of one sensor. Example:
Sensor server123 is offline when the notification starts the script error.ps1. Sensor server123 online script runs online.ps1
Arti...
Tue, 10 Jun, 2025 at 2:50 PM
Hello.
Please tell me how you can set up sending JSON when the sensor has an error? Is there such functionality in PRTG?
I have sensor configured SMTP&IMAP Round Trip sensor, when an error appears on the sensor, need to send JSON.
...
Tue, 10 Jun, 2025 at 2:50 PM
Hello,
i have a simple problem. There is a Sophos XG Firewall with two WAN Interfaces. One of them is the main WAN Interface with a Cable. The second one is a backup WAN interface with a mobile backup router. Now there is a problem, that ...
Tue, 10 Jun, 2025 at 2:50 PM
Hi,
we are currently building a map for our office. My coworker and I are a bit (a lot) finicky about the look. So far, I was able to do a few things with the custom css, like vertically align the donut texts and creating custom mapobject...
Tue, 10 Jun, 2025 at 2:50 PM
We use netflow with success to monitor activities.
I can define a protocol name based on IP or/and port used.
We use also API to export information to powerbi We export top talkers & top protocol.
But I cannot associate the 2, never ...
Tue, 10 Jun, 2025 at 2:50 PM
I just installed PRTG on Windows Server 2008r2, and I'm unable to get email notifications to work.
My mail is hosted remotely, not on this server. I have set up Notification Delivery as " Use one SMTP relay server (recommended i...
Tue, 10 Jun, 2025 at 2:50 PM
Is it possible, that a read only user can see the set thresholds of a sensor?
Article Comments
Hello Michel,
read-only users can only see the limits as graphic interpretation in the sensor gauges, but cannot open the channel c...
Tue, 10 Jun, 2025 at 2:50 PM
Would like to be able to monitor a Kafka environment without having to hack together the unsupported JMX probe or run a series of load intensive shell scripts.
Article Comments
Hello David,
Thank you for your message.
Can yo...
Tue, 10 Jun, 2025 at 2:50 PM
Hi, we are using the new Veeam Backup Job Status Advanced Sensors and noticed that some of the Jobs are showing a "failed" state. But when I check our Veeam Backup & Replication Console (v11), it shows that everything is OK an...
Tue, 10 Jun, 2025 at 2:50 PM
When I am using the iPRTG application on my iPhone, I can pause a device, but I cannot un-pause or resume a device from the interface. I only see the pause button, no play button, and when I click on the pause button, it give me the option...
Tue, 10 Jun, 2025 at 2:50 PM
I would like to know if it is possible to add a column to a custom map object that shows the device's comments.
So for a list of downed sensors, there would be a column that would display the comments for the device, of which the sens...
Tue, 10 Jun, 2025 at 2:50 PM
Hi,
Are there any plans on developing Nimble disk arrays and VMware vCenter Server Appliance (the linux version) sensors?
Article Comments
Hi there,
Currently there are no plans to implement Nimble Storage Sensors. You can how...
Tue, 10 Jun, 2025 at 2:50 PM
I am using api/table.json?content=messages to get the output.
the response payload contains api/table.json, is it in GMT/UTC? What will be the timezone of the datetime that is getting returned?
If I want to pass filter_dstart param ...
Tue, 10 Jun, 2025 at 2:50 PM
I need to monitor the Disk Latency on a Linux Server. One way I thought of was to simply copy a large file every time and use how long it took as my measure.
Article Comments
Hi,
you may use the command "iostat" in ad...
Tue, 10 Jun, 2025 at 2:50 PM
I have 2 hosts ESX5i with HA enabled. I'd like to monitor virtual machines connecting to vCenter but when i add a VMware Virtual Machine (SOAP) sensor and set proper credentials, i can see all running VMs with status Down, Last message ...
Tue, 10 Jun, 2025 at 2:50 PM
Messages that Auto-Discover was interrupted... if not intentional please run again. I am seeing this on many workstations. What would be interuptting them? There is nothing going on in the building most of the time these errors occur. ...
Tue, 10 Jun, 2025 at 2:50 PM
Is it only possible to login on the cluster web-interface with the username whitch is set on the cluster node? I would like to use our login names from the main server.
Thanks !
Article Comments
Do you mean log in to the failo...
Tue, 10 Jun, 2025 at 2:50 PM
After upgrading PRTG from version 9.2 to 12.2, our PRTG application no longer works. The server core log shows this repeating error:
DataSync 2: Access violation at address 0041252D in module 'PRTG Server.exe'. Write of address 0...
Tue, 10 Jun, 2025 at 2:50 PM
I have a netweork that only has Windows 2000 boxes. Any way to install a remote probe on those boxes or are we back at our sought after Linux Remote probe on a VM?
Article Comments
Hello,
I'm afraid it's the Linux+VM s...
Tue, 10 Jun, 2025 at 2:50 PM
I am new to PRTG, so forgive me if this is a stupid question.
I have PRTG setup on an IP space at work that does not get out to the internet and for monitoring servers on the same space, it works fine.
A web server we use is hosted by ...
Tue, 10 Jun, 2025 at 2:50 PM
Hi All,
pardon the simple questions, but I'm still trying to wrap my head around this whole sFlow concept.
The objective is to monitor total traffic on around 15-20 IP addresses for billing purposes. I am a little unclear about the te...
Tue, 10 Jun, 2025 at 2:50 PM
Hi,
I'm trying Google Analytics sensor. I performed the necessary configuration and returns me the following error message: "The remote server returned an error. (400) Bad Request". I am not using web proxy for this server. ...
Tue, 10 Jun, 2025 at 2:50 PM
I need a flexible configuration of devices and sensors. It can be called as a monitoring of IT infrastructure. I need to see a map of services, devices and dependencies between them. As a result I will be able to see a comprehensive system ...
Tue, 10 Jun, 2025 at 2:50 PM
How to run a report to show computers being monitored
Of to get a list of computers that are monitored
Article Comments
Please see:
List of Devices/Sensors with respective IDs listed
How can I get a list of the most recentl...
Tue, 10 Jun, 2025 at 2:50 PM
How to use PRTG v12 to monitor Qmail status ? It seems to not much people interest to monitor linux useful tool.
So far I felt v12 improve windows support a lot during my review product. Currently only Linux item need to check before reco...
Tue, 10 Jun, 2025 at 2:50 PM
I want to extract the netflow data, specifically the top lists, in an xml file.
Currently I use this link but that doesn't get me the right data:
https://***.**.**.***/api/table.xml?content=values&output=xml&columns=datetime...
Tue, 10 Jun, 2025 at 2:50 PM
I monitoring the interface of a cisco 1841 router in a remote office. After a break of the connection or a reboot of the router, I have sometime the failure No such Name (SNMP-Fehler # 2). The only thing I can then do is, to delete the sens...
Tue, 10 Jun, 2025 at 2:50 PM
Hi,
I need to reinstall my PRTG v6.1.0.757 in another machine, how can I export the configuration? Where is the config file of sensors, groups, stmp options....?
Best regards,
EF
Article Comments
Hello,
please see:
Ho...
Tue, 10 Jun, 2025 at 2:49 PM
Hello - I'm seeing "unusual" reports on my Microsoft Exchange Topology Service monitor that I didn't have before. I'm not sure if we have a new problem or if PRTG is now collecting data that it wasn't before.
Wh...
Tue, 10 Jun, 2025 at 2:49 PM
Hello,
I added the IP on Blacklist Sensor to one of my hosts, which already has multiple sensors working correctly.
The following error message is shown:
This is usually a temporary error during hostname resolution and means that the lo...
Tue, 10 Jun, 2025 at 2:49 PM
HI,
How do i compare the values of two (or more) channels in the Sensor Factory and alert if they return different numbers.
Details:
I have a checksum that runs on a database table, it returns a number, this checksum runs on what shou...
Tue, 10 Jun, 2025 at 2:49 PM
After upgrading PRTG to version 12.1, all 33 of our remote probes tried to upate at the same time, this saturated our internet connection and caused most of them to fail.
Now we have about 25 remote probes with status "Manual update ...
Tue, 10 Jun, 2025 at 2:49 PM
I've downloaded a custom sensor called "ExternalIP.exe". Then what should I do? I have copied this file to the folder of "Sensor System" but I cannot find the relevant sensor during carrying out the add sensor proce...
Tue, 10 Jun, 2025 at 2:49 PM
I know you can monitor when a .exe is running or not and if it is not running it will alarm. How can I setup a sensor to alarm when an .exe is running and when it is not running the status would be green.
Article Comments
This ...
Tue, 10 Jun, 2025 at 2:49 PM
Is it possible in PRTG Network Monitor to monitor SNMP traffic by ifDescr OID or ifAlis OID and NOT by ifIndex? ifIndex constantly change and messes up monitoring when agent gets rebooted.
Article Comments
what device are you mo...
Tue, 10 Jun, 2025 at 2:49 PM
Hello,
I'm searching how I can to summarize some traffic graphs to one "total" graph.
Is there any way to do this?
Article Comments
Hi,
you might want to have a look at the Sensor Factory Sensor for this purpose...
Tue, 10 Jun, 2025 at 2:49 PM
How can I enter LineBreaks in my message content?
Article Comments
Hi,
please note that PRTG is only the sender of the message. Line breaks have to be interpreted by the recieving program. Most mail programs should recognize th...
Tue, 10 Jun, 2025 at 2:49 PM
I need a flexible configuration of devices and sensors. It can be called as a monitoring of IT infrastructure. I need to see a map of services, devices and dependencies between them. As a result I will be able to see a comprehensive system ...
Tue, 10 Jun, 2025 at 2:49 PM
When I get an e-mail notification that says "Down Ended" does that simply mean that the down condition has cleared? Essentially saying that the sensor is back up?
Article Comments
Hi,
no, the "Down ended" me...
Tue, 10 Jun, 2025 at 2:49 PM
Since the Update on the new Version. I have trouble with some wmi Sensors that stays on unknown.
Also if I try to do a "check Now" it stays on Unknown.
Especally the "Disc Queue Length"-Sensor doesn't work.
Is this a...
Tue, 10 Jun, 2025 at 2:49 PM
How can we get the ARP table or route table of the unit under monitoring by using the SNMP function. Compare with the other monitoring program available on the markets, most the them can show the us the arp , route table as well as the IP a...
Tue, 10 Jun, 2025 at 2:49 PM
Autoupdate has stalled on:
Update download in progress... 71 of 89 MB
I am upgrading to latest version from 9.2.0.1296
Article Comments
Hi,
if the auto update does not work, please perform a manual upgrade instead. Please dow...
Tue, 10 Jun, 2025 at 2:49 PM
new user, login, fail
Added new user with user name and password. Getting the message: Your login has failed. Please try again! - User is active.
Article Comments
Hello,
are these users coming for an Active Directory integrati...
Tue, 10 Jun, 2025 at 2:49 PM
Hello,
Since one week we get a new error, when we're trying to add a new sensor (Virtual Machine- SOAP) on our VSPHERE ESX 4.1. We have a couple in a Cluster. Credetials are allright.
I recently upgraded from 9.2 to the 12.x and add a...
Tue, 10 Jun, 2025 at 2:49 PM
How does PTRG monitor the temperature.
I have a Atal ethernetprobe v2 and monitor this with a "atal ethernetprobe" template in cacti.
Now I started to use PRTG which has build-in sensors where i cannot find any temperature one'...
Tue, 10 Jun, 2025 at 2:49 PM
Exactly three minutes after trying to tests an e-mail notification, I get an entry in the log that says "Error sending "Email": Connection failed (ip address)"
I have configured the SMTP Relay Server and on port 25. I...
Tue, 10 Jun, 2025 at 2:49 PM
we woul like pto know if the website is up.
Article Comments
Hi,
you might use the PRTG HTTP Sensors for this purpose.
Best regards
Jun, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:49 PM
I want to monitor the status of video conference systems using a simple ping, or http.
Device on is ok, but device off should not be an error.
We use MAPS to visual our environment. (Alarm & Down Sensors for ROOT).
It is against the...
Tue, 10 Jun, 2025 at 2:49 PM
I'm trying to change the ping jitter sensors not to notify if there's downtime but only if they go above a certain threshold, 30ms for an example. I found if you go into the channel you can register it as "down" if it goes...
Tue, 10 Jun, 2025 at 2:49 PM
If I lose my internet connection, when I reconnect my browser will not access the PRTG monitor that had been running. The local probe continues to run but I cannot view anything without reinstalling the application (Free trial version). Whe...
Tue, 10 Jun, 2025 at 2:49 PM
When I collect information from the UPS apc3000 by SNMP with Cacti it works, but when i use the the PTRG SNMP apc hardware I get the error: no interfaces on the device(code:PE049)
Article Comments
Please open a ticket (or mail s...
Tue, 10 Jun, 2025 at 2:49 PM
Hi
In the footer of the logon page the correct time is shown - it agrees with the system clock.
On all other pages the time shown is one hour earlier. This is the case also when I look at graphs for the last two hours.
I am logging in ...
Tue, 10 Jun, 2025 at 2:49 PM
Hello all,
I have been playing with the billing tool, which is fantastic Im sure from what it does, but I would like to be able to bill clients simply by the total number of sensors under their remote probe.
It looks like I need to util...
Tue, 10 Jun, 2025 at 2:49 PM
Hello,
I had setup a IMAP sensor in order to monitor our backups jobs. This morning i have an error on that sensor says "Connection Closed Gracefully.". Could you please help me !!
Thanks
Article Comments
Please forw...
Tue, 10 Jun, 2025 at 2:49 PM
Hi,
When I add a new sensor in PRTG on a router, I get something like this in the list of interfaces to choose from:
(048) Connection-to-XYZ Network
I am pretty sure this is one of my vlan interfaces but I it is hard to tell which one...
Tue, 10 Jun, 2025 at 2:49 PM
Hallo,
ich habe das Problem mit demPTF Launcher. Ich habe alles so wie beschrieben im Forum erstellt, sprich eine .cmd Datei erstellt. Durch manuelle Betätigung der .CMD Datei funktioniert der PTF Launcher tadellos. Nur durch PRTG "n...
Tue, 10 Jun, 2025 at 2:49 PM
Dear Paessler
I think it's about time that Paessler did a rework to the install engine, so updates to the production machinery will be able to carry out without rebooting.
As I see it - it's just a matter of service stop - overw...
Tue, 10 Jun, 2025 at 2:49 PM
Is there any way (GUI or maybe regex) to exclude specific errors while using WMI event log sensor? I found similar question (the answer is "no"), but it happend a year ago - is there any new features? I mean always there are error...
Tue, 10 Jun, 2025 at 2:49 PM
Hi,
I am trying to change the Limits on multiple WMI multi disk sensors in version 9.2.1.2280
However, when I select and edit multiple sensors the percentage limits section is there but the byte limits section is missing.
Is there any...
Tue, 10 Jun, 2025 at 2:49 PM
I have implemented the SMTP Roundtrip Sensor for testing and can see that the PRTG server retrieves email via POP3 as part of the test.
What happens to the email that is downloaded via POP3? Is it stored anywhere or purged? We are plannin...
Tue, 10 Jun, 2025 at 2:49 PM
Sehr geehrte Damen und Herren,
ich erhalte zuviele Fehler und Warnmeldungen.
Systemzustand:
Letztes Ergebnis 95 % (Zustand)
Letzte Nachricht 59 % (Prozessorlast) liegt über dem Grenzwert für Warnungen von 50 %. CPU load on the probe syst...
Tue, 10 Jun, 2025 at 2:49 PM
