kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hello there,
is there a ready-to-use sensor available for Exchange DAG monitoring?
Thanks in advance, Marcus
Article Comments
Sorry, we don't have a sensor for DAG out of the box, please have a look at the following thread...
Tue, 10 Jun, 2025 at 1:16 PM
I have enable the change trigger on a few SNMP string variables which are monitored by a sensor.
Both sensors are getting values back of the type DisplayString.
It looks like the change trigger does not check all the characters of the stri...
Tue, 10 Jun, 2025 at 1:16 PM
How can I monitor traffic per Vlan?
Does PRTG software monitor traffic per Vlan?
PRTG displays the configured vlans at the Alcatel switch, but there is no infomation about traffic.
Article Comments
Dear Anavila
PRTG can mon...
Tue, 10 Jun, 2025 at 1:16 PM
I have made sure the local firewall is not interfering with 443 traffic. If I start the prtg server service using port 80 I am able to get to the start page. However when I choose to use 443 for SSL the service restarts with out issue but...
Tue, 10 Jun, 2025 at 1:16 PM
After adding a port description to a switch, PRTG picks up the change but creates a new sensor. For example, if I change Fa1/0/12 port description to "Willy Wonka device", then in PRTG I have Fa1/0/12 FastEthernet1/0/12 and a NEW ...
Tue, 10 Jun, 2025 at 1:16 PM
We are working hard to make PRTG our central monitoring system.
I have now come to our HP Insight installation and would like to have a sensor that can monitor the general health of HP Insight so that we would know if there is something &...
Tue, 10 Jun, 2025 at 1:16 PM
We use PRTG for the bulk of our monitoring but when it comes to VMware monitoring we would like it to do more. We currently use Veeam ONE for the VMware side of things as it provides a much deeper integration into vSphere and can monitor fo...
Tue, 10 Jun, 2025 at 1:16 PM
Hi
I really like the way the Android probe,once you have entered the details of the server into it, that the server alerts you to this, and then populates the server with the probe details/sensor availability.
Do you see this functionality ...
Tue, 10 Jun, 2025 at 1:16 PM
Hi There.
I`m testing out the PRTG solution primary for a network quality measurement. For a quick overview and a alert system, this solution is really great.
For some detail views I need the raw data. I still tried to use the API to ge...
Tue, 10 Jun, 2025 at 1:16 PM
Hi,
I have installed the JMX Mini Probe and I am now trying to add a custom MBean sensor. I managed to monitor simple Mbeans like the following:
Mbean: java.lang:type=Threading
Attribute Object Name: ThreadCount
But now I want to moni...
Tue, 10 Jun, 2025 at 1:16 PM
Hallo Support,
seit dem Upgrade der Datenbank auf Oracle 11.2.0.4 funktioniert der Oracle SQL Sensor nicht mehr.
Wir testen auf die Verfügbarkeit der Datenbank, in dem wir uns nur einloggen.
Dementsprechend sind die Felder "Service N...
Tue, 10 Jun, 2025 at 1:16 PM
Has anyone created a custom object that is a simple square with a value in it?
Best case would be if the squares background could change color according to down/warning/OK
Article Comments
Hi,
Please have a look at the map obj...
Tue, 10 Jun, 2025 at 1:16 PM
When creating a report in PDF format, i'm actually getting multiple PDF files stored
e.g.
Report - Part 01.pdf
Report - Part 02.pdf
etc.
Is it possible to have the report created as one file?
Article Comments
Dear Vobelic...
Tue, 10 Jun, 2025 at 1:16 PM
I've been working on generating reports for multiple sensors as part of automated reporting.
I am wondering what units are used for the Downtime(RAW) value. Should I interpret it as a percentage that needs to be divided by 10000?
I&...
Tue, 10 Jun, 2025 at 1:16 PM
Hello,
Please add more Graph tabs!
Now PRTG have only 4 Graph tabs (Live/2days/30days/365days)
I suggest these tabs:
1) Live
2) Day
3) (2...3 days)
4) Week
5) Month
6) Quarter
7) Year
8) (3 years)
Article Comments
This is a ...
Tue, 10 Jun, 2025 at 1:16 PM
Hi, I recently purchased a license key and it looks like it won't activate on the Freeware Edition.
I'm assuming I need to download the Commercial Edition, but I saw that for me to be able to download the Commercial edition, I nee...
Tue, 10 Jun, 2025 at 1:16 PM
I've already use PRTG Network Monitor freeware and let me know how can I use hyper-v host or guest sensor ?
are these sensor license include in every "PRTG Network Monitor" product ?
Thanks
Reza
Article Comments
h...
Tue, 10 Jun, 2025 at 1:16 PM
Can you please offer help for the PRTG setup wizard Enter License Key screen? How can I enter valid license information?
Where do I get my license key from?
What do I have to enter in this screen?
Article Comments
This a...
Tue, 10 Jun, 2025 at 1:16 PM
Is the limit on the number of sensors in a license per core or per probe?
If I am limited to 500 sensors, but have multiple probes, can I use 500 sensors per probe?
Article Comments
Hi,
the limit of sensors is the overall limit...
Tue, 10 Jun, 2025 at 1:16 PM
WMI Sensors of this probe can not be scanned in their specified intervals. Try longer intervals or d
Recently upgraded to PRTG 15.1.13.1456 where we have started seeing Probe Health down for Interval Delay WMI. We have only 20 or so devices and maybe 50 sensors not all of which use WMI. Not sure why there is gross delay of time.
The CP...
Tue, 10 Jun, 2025 at 1:16 PM
Hello,
We have several IIS servers in a "cluster" hosting one single site/webshop (a load balancer is setup in front of the cluster). I need a way to monitor each IIS server site via the HTTP or HTTP advance sensor by using an U...
Tue, 10 Jun, 2025 at 1:16 PM
Hello All,
each time I change my LDAP-PWD PRTG activates the overload-protection. To end the overload-protction-mode I have to re-save alle librarys that I've created.
Where is the mistake in my configuration?
Article Comments
...
Tue, 10 Jun, 2025 at 1:16 PM
When I retrieve the Downtime(RAW) values I am wondering
1) how PRTG deals with the "One time maintenance" windows.
A) Do these windows automatically do not count for downtime?
B) Is there a way for me to retrieve all the one...
Tue, 10 Jun, 2025 at 1:16 PM
We began utilizing PRTG for monitoring of our expanding AWS presence not too long ago. We haven't seen it run very well yet, despite the attempts we've made to adjust per advice we've received the same issues continue.
The ma...
Tue, 10 Jun, 2025 at 1:16 PM
Dear PRTG KB,
i have 5500 sensors and i need to start configuring dependencies..
i have multiple sites that depend on only one site
Example:
Russia
/
USA -- Paris
\
London
If USA goes down, i do not ...
Tue, 10 Jun, 2025 at 1:16 PM
Hello, I just wanted to ask, if I were to buy a license, for how many PC's can I use that license?
Article Comments
You could install the software on 1 PC, but you could monitor any number of devices within the license's...
Tue, 10 Jun, 2025 at 1:16 PM
I am using freeware PRTG but still showing this mesage
""Startup: Starting Core Server: PRTG Network Monitor 12.4.7.3474 PRTG Network Monitor Trial (25 days left)""
Time is auto decrease day to day.
I really like t...
Tue, 10 Jun, 2025 at 1:16 PM
Hi Guys,
I'm monitoring a windows box services with a WMI sensor and would like to get a notification; If state change to UP, then notify.
I've tried to use the "add change trigger" but that doesn't seem to be send...
Tue, 10 Jun, 2025 at 1:16 PM
Hello,
I have download and get serial of freeware,
I want to known this key / Software is valid lifetime or not ??
Thanks
Rakesh
Article Comments
Hi,
there is no restriction in time for the freeware version. So you will be...
Tue, 10 Jun, 2025 at 1:16 PM
I have a Exchange 2010 environment and just had an issue with one of my CAS servers. This caused a problem for my users.
My question to you guys is how can I monitor an NLB (Network Load Balancer) for Exchange 2010? I have 2 CAS servers...
Tue, 10 Jun, 2025 at 1:16 PM
Connection could not be established (Access violation at address 75B8C880 in module 'ole32.dll'. Rea
Hi
On one of ours probe we get this, on a lot of services:
Connection could not be established (Access violation at address 75B8C880 in module 'ole32.dll'. Read of address FEC88032 - Host: 10.105.7.73, User: administrator, Password:...
Tue, 10 Jun, 2025 at 1:16 PM
I'd like to see the auditlog (create probe/device etc, delete probe/device etc etc.etc and by which prtg user it was done.
Is that possible? Is there some sort of auditting in PRTG?
Thx
Article Comments
If you click on ...
Tue, 10 Jun, 2025 at 1:16 PM
Hello,
Is it possible to generate a map (sunburst or treemap) with only warnings and criticals alerts ?
I tried to edit the HTML under the webroot directory without success.
Thanks for help,
Nicolas.
Article Comments
Hel...
Tue, 10 Jun, 2025 at 1:16 PM
On older version (PRTG 6 for instance) I was able to monitor LIVE data to the server which included the IP Address and the PORT number they were accessing. This was very handy when tracking someone attempting something malicious.
Later v...
Tue, 10 Jun, 2025 at 1:16 PM
Nach dem Neustart des Servers wird der Dienst PRTGPRobeService nicht gestartet.
Der Dienst ist auf Automatisch starten eingestellt.
Wenn ich Ihn manuell starte wird er gestartet und funktioniert
Warum ?
Article Comments
Hallo...
Tue, 10 Jun, 2025 at 1:16 PM
I need to get graphs from yesterday at 03:00 until 10:00. I'm sure this is simple but I've never used Paessler. Thanks for you help.
Article Comments
When you're in a sensor's overview page (simply click a se...
Tue, 10 Jun, 2025 at 1:16 PM
We try to login to PRTG with several AD users, but it doesn’t work. We created a new Active Directory group and added the users to it. Then we created a user group in PRTG with the same name and linked it with the AD group. In addition, we ...
Tue, 10 Jun, 2025 at 1:16 PM
Hi Community,
i have a problem to monitor a CPU on different servers.
i got this error message:
No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP-Fehler # -2003)
But i ca...
Tue, 10 Jun, 2025 at 1:15 PM
Currently, i added three process in the snmpd.conf in my Linux server:
proc <httpd2-prefork>
proc <java>
proc <acronisagent>
For the httpd, there is number of processes are running:
ps -e |grep httpd
1663 ? 00:...
Tue, 10 Jun, 2025 at 1:15 PM
In the recent months we have seen multiple client machines causing broadcast storms on our network, usually from faulty network cards or drivers. At the moment, I try to identify the source of these storms by manually inspecting each SNMP ...
Tue, 10 Jun, 2025 at 1:15 PM
Hello
I recently noticed what i think is a problem
I have a single server with 3 different virtual hosts with https certificates
I put 3 sensors for the expiration of those certs on the same device
The sensors on the days left on the 3 ce...
Tue, 10 Jun, 2025 at 1:15 PM
I'm trying to utilize PRTG for Storage Capacity Management, specifically Shares/Folder. How do I do this?
Folder Sensor (D$\Foldername) returns only 0's (Status == Ok, but null data)
Share Disk Free Sensor returns only % Free which...
Tue, 10 Jun, 2025 at 1:15 PM
I already read this document - https://www.paessler.com/manuals/prtg/active_directory_integration.htm - and the integration is working.
But the password for the authentication is send as clear-text password.
This is not really secure.
Is...
Tue, 10 Jun, 2025 at 1:15 PM
I setup this sensor to monitor a custom OID that returns a number depending on error/warning. if the result is 1 set to warning, and if it's 2 set to error. Well if there's no error or warning the value is NULL or not set. How do I ...
Tue, 10 Jun, 2025 at 1:15 PM
Hi everyone,
I want to monitor time of the system.But i can't find any sensor to do this.If prtg can not do this,what can i find a plugin to do this. I hope every can help me.Thank so much !
Article Comments
You can have a...
Tue, 10 Jun, 2025 at 1:15 PM
Hi everyone.
I was wondering if a sensor can have more than one dependency (I.E it will only scan if 2 or more Others are up)
For Example - we have a set of web servers sitting behind a NLB. When a certain server is having a problem we ...
Tue, 10 Jun, 2025 at 1:15 PM
Hello, PRTG Support,
I'm trying to get the value of password hash with the following API call "https://PRTG_hostname_or_IP_address/api/getpasshash.htm?username=myuser&password=mypass" and got the response:
"You need...
Tue, 10 Jun, 2025 at 1:15 PM
When trying to add any of the Dell Openmange sensore I get the following error.
SNMP error # -2011
OpenManage is installed.
SNMP community string matches on server and PRTG.
Article Comments
Dear Billo
Please try to connec...
Tue, 10 Jun, 2025 at 1:15 PM
Hi,
I have seen Thread creation error on 2 different PRTG probe server in last 2 weeks. I restarted the probe service and the issue was resolved. I haven't seen this error before with any other PRTG versions. This has started after ...
Tue, 10 Jun, 2025 at 1:15 PM
Hallo ihr Lieben
ich hab einige Beamer, die jedch etwas älter sind. Ich möchte diese vom PRTG monitoren lassen, jedoch unterstützen sie SNMP nicht und ich weiss nicht, wie ich ansonsten an meine Beamerinfos herankommen soll.
Ich kann üb...
Tue, 10 Jun, 2025 at 1:15 PM
I see the messages being gathered but have no way to export for 3rd party review. This is quite critical at the moment.
Thanks,
John
Article Comments
Sorry, this is still on our wishlist. Exporting the syslog messages is cur...
Tue, 10 Jun, 2025 at 1:15 PM
I added too many channels to my custom netflow sensor. When I trimmed down the channel definitions, the ones I removed still show up on the sensor overview page.
How do I remove the old custom channels without having to create a new senso...
Tue, 10 Jun, 2025 at 1:15 PM
Hello,
Using Mozilla as Webbrowser and PRTG 10.1.14, Im not able to change Sensor setting inherit checkbox. It keeps solid.
Steffen
Article Comments
Hi,
could you possibly send us a screenshot to support@paessler.com? When ...
Tue, 10 Jun, 2025 at 1:15 PM
Is there any website with a collection of custom sensors like Nagios-Exchange out there?
http://exchange.nagios.org
If not - any interested people for starting such a project? I can help with hosting such a website.
Article Comm...
Tue, 10 Jun, 2025 at 1:15 PM
Hi,
currently I'm testing your software because we want to use it in future to monitor our MES systems. I've seen there is sensor that checks if a service is NOT running but I'm wondering that there seems to be no sensor that...
Tue, 10 Jun, 2025 at 1:15 PM
Within the PRTG web interface, the remote probe connects and holds the connection for 5 min.
11.03.2015 10:06:35 Keine Probe W7PERF09 Getrennt
Probe ""W7PERF09" " auf 172.16.XXX.XXX:58509 hat die Verbindung getrennt
1...
Tue, 10 Jun, 2025 at 1:15 PM
Hallo zusammen,
ich bekomme in letzter Zeit häufig folgende Fehlermeldung bei der Abfrage verschiedener WMI Sensoren:
WMI: 800703E5: Überlappender E/A-Vorgang wird verarbeitet -- PerfCounter: Mit den angegebenen Anmeldedaten konnte kein...
Tue, 10 Jun, 2025 at 1:15 PM
I use this OID : 1.3.6.1.4.1.841.1.1.1.1.1.1.1.5
I have a error : No such instance (erreur SNMP # 223)
Article Comments
Dear Alexis
Please use our SNMP Tester to perform a Walk on 1.3.6.1.4.1.841.
The Walk can take some mi...
Tue, 10 Jun, 2025 at 1:15 PM
Hi, apologies in advance if this is answered elsewhere but I couldn't find anything.
My volume trigger notification for specific event log errors aren't working as I'd expect. I'm supposed to get a notification if I get &g...
Tue, 10 Jun, 2025 at 1:15 PM
Is it possible to create URL aliases/shortcuts like in WordPress/Drupal/etc?
For a example I want to create a URL like:
http://mymonitor.com/shortlinks/twodayoverview
to point to
http://mymonitor.com/device.htm?id=2039&tabid=2
...
Tue, 10 Jun, 2025 at 1:15 PM
I started out with a single trap receiver sensor on the probe device itself but since there's no reverse lookup for the source IP, its unusable for immediate identification of the offending device.
Is it wise to have a separate trap s...
Tue, 10 Jun, 2025 at 1:15 PM
I am trying to monitor a folder located on a NetApp SAN Location. I know there is a requirement that "the "LanmanServer" Windows service must run on the target computer" which NetApp does.
But i am unable to get this t...
Tue, 10 Jun, 2025 at 1:15 PM
Is there a centralized location for the exchanging of custom or additional sensors or sensor packs?
-RT
Article Comments
Hi,
please see http://code.google.com/p/prtg-addons/. There are third party addons but also free. Best r...
Tue, 10 Jun, 2025 at 1:15 PM
I was reading your article on built in PUSH notifications in PRTG.
https://helpdesk.paessler.com/en/support/solutions/articles/76000065189-how-does-the-prtg-cloud-deliver-push-notifications
I see that step 1 of the configuration is a ...
Tue, 10 Jun, 2025 at 1:15 PM
Hi Paessler KB Team,
When I add an IP SLA UDP-Jitter sensor to PRTG it adds all the channels that comes with that IP SLA sensor. However I'm only interested in about 25% of the channels and so have to manually remove the ones I don...
Tue, 10 Jun, 2025 at 1:15 PM
Is there a tool to create WMI queries easily, so I can use them PRTG's WMI Custom Sensor?
Article Comments
Note: This post is based on information submitted by our Knowledge Base user "Dean". Thanks, Dean!
Creati...
Tue, 10 Jun, 2025 at 1:15 PM
Can you give me a custom script to monitor SQL server table fragmentation?
Article Comments
You can do this using a custom VBScript. Please note that we provide this without any warranty or support.
Use the script in combinati...
Tue, 10 Jun, 2025 at 1:15 PM
How to create a custom sensor (and graph) that monitors a continuously updated log file?
Article Comments
Using PRTG’s custom sensor API, and a little bit of python, I was able to create a beautiful custom sensor and map object....
Tue, 10 Jun, 2025 at 1:15 PM
Hello,
ist ist possible to monitor deveolo dlan adapters? With the devolo cockpit software I can check the individual transfer rates and the link quality.
I know that the powerline adapters don't have an IP adress, but they have a MAC...
Tue, 10 Jun, 2025 at 1:15 PM
I use non standart ports on linux hosts, and specify it in group setttings, but discavery trying use only standart (22) port
Article Comments
Dear Alexander
Once you saved the template, please find it in the "devicetempla...
Tue, 10 Jun, 2025 at 1:15 PM
Hi Paessler,
We have a number of Cisco 891's on our network that we monitor. Monitoring the router itself is no problem but the AP is embedded so I was wondering if it's possible for PRTG to pull stats from it and if so, what sort...
Tue, 10 Jun, 2025 at 1:15 PM
We have a WMI File sensor that monitors the last write time of a file on another server. Since daylight savings, the sensor always reports the file is 1 hour behind. The probe server and the monitored server both have the same time. The pro...
Tue, 10 Jun, 2025 at 1:15 PM
In our graphs, at every 1hour interval across all the sensors at remote locations the graph "cuts" or "dips" to 0 for a short second. Is that related to the SNMTP technology used on the core installation, or firewall rel...
Tue, 10 Jun, 2025 at 1:15 PM
I would like to monitor our bandwidth of our links.
We are using SNMP on our firewalls, and we are getting the ifInOctets and ifOutOctets OIDs.
How do I convert these into bandwidth? According to the Cisco website - http://www.cisco.c...
Tue, 10 Jun, 2025 at 1:15 PM
Hi all,
I'm thinking in getting a new monthly report to analyze whether all public or private net access is undersized or not.
I can check that myself for all sites but it would be very hard and time loss. I think this is a very usef...
Tue, 10 Jun, 2025 at 1:15 PM
Dear Sir,
How can I change PRTG's snmp setting ?
Our company installed a set on PRTG and snmp port setting on 161 and 162,
how we can change them from now to 163,164 ?
And should we need to backup PRTG config firstly, and after we ...
Tue, 10 Jun, 2025 at 1:14 PM
Hey,
I work in IT support for a post production facility which has grown a lot over the past few years, and these days we are considering purchasing PRTG.
We run a lot of services (transcode servers, FTP servers, several databases, 3D rend...
Tue, 10 Jun, 2025 at 1:14 PM
I use WMI Service sensors to monitor some standard Windows services. I set the sensor to restart the service if it is not running anymore, but PRTG does not restart the service. Is there a possibility for debugging?
Article Comments...
Tue, 10 Jun, 2025 at 1:14 PM
I have an HTML page which looks like this:
[120] [RandomText]
First value is an integer, and the second value is a string.
I would like to create a sensor, that will send the string itself (let's say by email, but that is not the is...
Tue, 10 Jun, 2025 at 1:14 PM
I would like to read the WMI performance counter AvgDiskBytesPerTransfer from the WMI Class Win32_PerfRawData_PerfDisk_LogicalDisk in order to monitor the average number of bytes transferred to or from the disk during write or read operatio...
Tue, 10 Jun, 2025 at 1:14 PM
I would like to read the WMI performance counter AvgDisksecPerTransfer from the WMI Class Win32_PerfRawData_PerfDisk_LogicalDisk in order to monitor the average disk transfer time.
Can I do this with an external script?
Article C...
Tue, 10 Jun, 2025 at 1:14 PM
The functionality of PRTG's standard event log sensor is not sufficient for my needs. Is there a way to check a computer's Windows Event Log file using extended functionality, for example, other filters?
Article Comments
...
Tue, 10 Jun, 2025 at 1:14 PM
Ich habe ein Script erstellt, welches die anzahl bestimmter Kontakte ausliest.
----------------------------------------------------------
$myKontakte = Get-AddressList "Kontakte XYZ"
$varAnzahl=(Get-Recipient -RecipientPreviewF...
Tue, 10 Jun, 2025 at 1:14 PM
I need to be able to proactively determine when storage issues are causing virtual desktop sluggishness in real time. Otherwise, I only see that “my desktop is slow” but I do not have the ability to efficiently determine why, whether it is ...
Tue, 10 Jun, 2025 at 1:14 PM
I've created an Advanced Custom sensor (EXEXML), and am trying to handle error conditions across multiple channels. What i want is for the sensor to go into error state if a single channel is in error state. I've achieved this by u...
Tue, 10 Jun, 2025 at 1:14 PM
I wrote VBasic the query to MSSQL gives out a mistake in job -
"Response not wellformed: "(C:\Program Files (x86)\PRTG Network Monitor\custom sensors\EXE\Demo VBScript.vbs(10, 30) Microsoft VBScript compilation error: Expected en...
Tue, 10 Jun, 2025 at 1:14 PM
I created a VBS script that checks the state of a specific service. If the service is in a "running" state the script returns: "0: ok" If it's not running the script will return some other value. I tried having re...
Tue, 10 Jun, 2025 at 1:14 PM
I have a vb scipt that checks our Exchange server Mailbox Database file size. When it is run on the PRTG server from a command line it works, but when run from within PRTG as a custom sensor it fails.
If I modify the script to check a ...
Tue, 10 Jun, 2025 at 1:14 PM
I have a very simple powershell script. In a function is some logic and the return value of the function should be the exit code for the script.
For the result 0 and 1 (ok and warning) the script works well, but if the function returns 2 (...
Tue, 10 Jun, 2025 at 1:14 PM
Hi there,
I`m trying to use an Advanced Custom Sensor, to get the open Snapshots in a VMWare Environment.
Therefor I use the Script from the following thread --> https://www.paessler.com/knowledgebase/en/topic/29313-vmware-snapshots....
Tue, 10 Jun, 2025 at 1:14 PM
Hi,
Following the example from this topic, I have created a sensor to count the number of locked out Active Directory accounts.
The XML output looks like this:
<prtg>
<result>
<channel>Locked Out Users</channel>
...
Tue, 10 Jun, 2025 at 1:14 PM
Hi,
We're having some trouble getting custom powershell scripts to return correct values to PRTG. The script is being executed by an account with domain admin, so I don't think permissions are a problem. When run manually the script...
Tue, 10 Jun, 2025 at 1:14 PM
I would like to get information about the Powershell Version which runs my custom Powershell Sensor.
Article Comments
You can use two very short scripts to gather information on the Powershell Sessions which execute your custom ...
Tue, 10 Jun, 2025 at 1:14 PM
Dear Paessler
I would like to know if it's possible add a note (text) to a single sensor that in case of down, the email message contains that note.
Best Regards
Article Comments
i will use comment
Mar, 2015 - Permali...
Tue, 10 Jun, 2025 at 1:14 PM
All,
I need to be able to have one of our customers be able to see a sensor outside of his group limitations.
I know I can go in and customize group, etc. But our system is setup to inherit the Access Rights from the core device. Thou...
Tue, 10 Jun, 2025 at 1:14 PM
When a request is made there are some external assets that are not available and return a 404. The page loads fine but Paessler reports 100% errors for the page.
Is there a way to omit those external urls / domains?
Article Commen...
Tue, 10 Jun, 2025 at 1:14 PM
Overall objective is to create disk latency sensors to get sec/write and sec/write from Windows servers. Here's what I've tried so far, any guidance greatly appreciated.
Inbuilt sensor - I couldn't find one, could you plea...
Tue, 10 Jun, 2025 at 1:14 PM
I want the output of my SQL Stored Procedure to show multi channels in one sensor, instead of having a single sensor for every value that I want to monitor.
How can I do this?
Article Comments
PTF.SQLspXML
This can done with...
Tue, 10 Jun, 2025 at 1:14 PM
Besides Linux, we need to monitor Solaris and Aix machines, too, but the standard Linux sensors often do not work for those Oss. So the Question is: Is there a way to write custom ssh-sensors and is there somewhere an example how to do this...
Tue, 10 Jun, 2025 at 1:14 PM
My Cisco 2901 has two sub-interfaces carrying traffic. I need to add those interfaces to my PRTG console for monitoring.
Please guide me how I should proceed?
Further, I have added two sensors and tried to use the filtering rules to get...
Tue, 10 Jun, 2025 at 1:14 PM
